Eutrophication of the Baltic Sea and Swedish lakes remains a major problem despite many years of effort to reduce the emissions of nutrients. One major source is waste water systems, especially private sewage systems. These sewages accounts for a very large share of nutrients per capita in comparison with citizens connected to larger sewage treatment plants. Norrtälje community has the greatest number of private sewage systems in Sweden. Discharges of nutrients, especially phosphorus, to the Baltic Sea from these sewage systems are significant.

 The objective of this thesis is to examine the difference in workability in fresh concrete, when crushed fine aggregate replaces natural gravel. The shape of the fine aggregate,  packing and flow of six crushed material and three natural materials will be determined by easy studies, the results will be compared with a slump cone test..

This project started with an exploration of geometric shapes and textile materials. It resulted in a chair made out of textile bands with different elasticity. The surface for sitting is flat when the chair is not used, and changes in the moment you sit down and gets a new shape. A piece of furniture that adapts to each individual. The chair emphasizes the important relationship between human and product as the person using it becomes a part of the chair for a moment..

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

With the growing amount of citizens with another mother tongue than Swedish, the need for assessment instruments in other languages than Swedish within the Swedish health care increases. To enable this, the knowledge of multilingualism and adequate assessments are required. The aim is to develop a modern Arabic version of a screening material that is comparable to what is used in the Swedish clinic in the assessment of people diagnosed with aphasia. In the present study, Short Aphasia Examination (Kortfattad Afasiprövning), which is one of the few screening material is available in Swedish and among the ten most frequently used assessment materials (Blom Johansson, Carlsson & Sonnander, 2011). Translation and adaptation was made to the Standard Arabic (KAPARABISKA) and Arabic dialect of Hadari (KAPHADARI).

Few helmets, dated to the Vendel period are known from Scandinavia and even fewer are known from the Viking age. Paradoxically, picture stones and sagas frequently tell about these objects as if they were very common, something that is contradicted by the archaeological material. The purpose of this thesis is to examine different literary sources and compare these to the archaeological materials and by doing so, gets a clearer picture about the emergence, use, function and of the late Iron Age helmets in Scandinavia..

All products will eventually end up as waste, which in a sustainable society has to be handled in an efficient and environment friendly way. This report focuses on waste fractions meant for combustion, often difficult to characterize. However, more homogeneous fractions that are treated biologically are also discussed.The study concerns the region of Borås, Sweden, where the waste plant Sobacken has provided a good starting point. On this site, fuel to the Energy-from-Waste plant of Borås Energi is prepared and the biological waste is treated through anaerobic digestion.One important part of the study has been to collect experience-based knowledge from the technical staff at Sobacken and Borås Energi. This information was compiled into an overview of wanted and unwanted fractions to the preparation plant and the boilers respectively.

The collection of hazardous waste from the household around Swedish municipalities varies. 1% of the households waste is hazardous waste. It has hazardous features that can give bad consequences for the nature and human health if we don?t collect it and treat it. Therefore the law controls it, the municipalities have responsibility for the household waste.

In this project, we are studying the material flow and the information flow of sample materials and the appurtenant report of deviation for the purpose to be able to suggest better solutions. The sample material, which is to be analysed, is to be continuously taken from the production flow. The purpose is to navigate the process by the results found by the analysis. Because of this, it's very important that both methods of analysis are ensured and that the sample material is representative for the production flow. However, even more importantly, is that activities and transportations, combined with both flows, must perform in a quick and correct way in order to maintain or improve Höganäs AB's competitive strength.According to reports are about 20 products per day not available, for loading, at the time of delivery.

The aim of my thesis is to obtain knowledge of textile wastewater and textile sludge from an environmental perspective, which can be used as a basis for the  ?Sweden Textile Water Initiative? guidelines for a sustainable sludge management. In my study I have mainly focused on textile dyes, salts and metals and their routes during wastewater treatment.This paper is partly a literature review, which I began by identifying the pollutants discharged from each textile process. Then I studied wastewater and sludge quality, environmental aspects, possible treatment and recycling methods. I have also tried to find existing type of guidelines in order to make comparisons.

I denna uppsats görs en jämförelse mellan läromedel i spanska för nybörjare. Betoningen ligger på grammatik och länderkunskap..

I den här rapporten redogörs för processen vid framtagandet av det första objektet i möbelserien Vesper. Författarens tillika formgivarens tankar kring olika materials narrativa förmåga i relation till en betraktares förförståelse, föranleder en formgivningsprocess som resulterar i ett arbetsbord där material och symbolspråk tänks förmedla sköna värden. Uttryck av varaktighet och omsorg i en kontext med tillfällighetssyndrom..

Staden Sulaymaniyah ligger i den kurdiska delen av Irak och har på senare år utvecklats då många valt att flytta från landsbygden till den centrala delen av staden. Nybyggandet sker under tidspress och långsiktigt hållbara lösningar prioriteras inte. Målet är att ta fram ett hus som är anpassat för majoriteten av befolkningen och samtidigt få ett bra och energieffektivt inomhusklimat. En faktainsamling genomfördes för att ge bakgrundsinformation till projektet. Vidare gjordes en planlösning till huset i AutoCAD vilken har använts som grund till utformningen av huset och smarta lösningar.

This paper describes the process of building a machine translation lexicon for use in the train and transport domain with the machine translation system MATS. The lexicon will consist of a Swedish part, an English part and links between them and is derived from a Tradostranslation memory which is split into a training(90%) part and a testing(10%) part. The task is carried out mainly by using existing word linking software and recycling previous machine translation lexicons from other domains. In order to do this, a method is developed where focus lies on automation by means of both existing and self developed software, in combination with manual interaction. The domain specific lexicon is then extended with a domain neutral core lexicon and a less domain neutral general lexicon.