In Sweden more than 400 000 private households have not yet sufficient wastewater purification. These effluent is considered as an increasing problem and many onsite purification methods have been studied. In this investigation, the method of reactive bed filters have been tested by column and batch experiments. Five different kinds of filter materials with reactive surfaces have been studied concerning their capacity to absorb ammonium and phosphorus from wastewater. The materials that were examined are Filtra N, wollastonite Filtra P, blast furnace slag and Polonite®.

The purpose of this study was to evaluate which apple cultivars are best suited for production of juice and cider. The study was limited to 41 cultivars. Common as well as uncommon apple cultivars were selected from available cultivars in the cold storage at Balsgård, Department of Horticultural Plant Breeding and Biotechnology, SLU.The practical part of the study consisted of the apples being pressed, and then the juice characteristics being assessed by appropriate criteria and methods of analysis. The analyses consisted of measurment of soluble sugars with a refractometer (Brix), titration of total acidity, determination of total phenolic content with a spectrophotometer, estimation of alcohol content by density meters and qualitative taste tests.The study did not account for different maturity of cultivars. Different apple cultivars were pressed on separate occasions, before and after Christmas 2010.

This study investigates how nutrients from source-separated human urine from Gothenburg properties can be used as fertiliser in agriculture or for parks or sports fields. The initiator is the Department of Sustainable Water and Waste Management at the City of Gothenburg. Today urine-diverting systems are installed in two apartment buildings and two public-use buildings. Urine recycling is expected to lead to less exploitation of natural resources and less eutrophicating discharges into water recipients. In the study the urine?s market potential is investigated, for which practical handling issues, business aspects and acceptance of customers, employees and visitors have proved to be important.

When harvesteing ley there is always mechanical losses from the harvest machines. During the last years the roundbalers with knives,cutting the material-are more common, This use increase the mechanical losses of material. MATERIALS AND METHODS The roundbaler which used in this test was a Krone Vario Pack 1500 Multi Cut. This roundbaler has 17 knives. The theoretical length of cut was 64 mm. During the test we stretched a rubber tarp under the balechamber and collected the materials which fell down from the balechamber.

The purpose of this thesis was to find out whether the main class C (religion) in the Swedish classification system Klassifikationssystem för svenska bibliotek is well adapted to classify materials published in or imported to Sweden, and handled by Swedish libraries today. The questions we put to ourselves were:1. How easy to understand, and how useful is the main class C religion today?2. What, in the main class C, is satisfactory?3. What, in the main class C, is inconsistent, anachronistic or incorrect?4. What, in the main class C, is in need of change or renewal?The method that was used was a number of interviews with librarians and cataloguers. We have interviewed eight librarians from six different libraries, of different types, but all with a relatively large collection of religious materials.Though all of our respondents have expressed a feeling that all the major religions deserve equal treatment in the classification system and a similar division of space, after some pondering on the subject, our respondents have agreed that a larger space for Christianity is warranted considering the composition of the current collections and publication. Our respondents have in some cases expressed that there is a lack of instructions as to how the subdivisions of the main class C (religion) is meant to be used.

My purpose in this paper is to study teachers' work in reading and writing in primary school and special school. I want to find out if they use the same methods, strategies and materials to help students learn to read and write. I will find out the answer to my purpose by performing two qualitative observation and two qualitative interviews. Lundberg (2010) is the researcher I relate to during my study. Through observation, I see how teachers work with students in the classroom during a lesson in the Swedish language. During the interviews, I received answers to how teachers work with language, the materials, methods and strategies they use. I found out that teachers use specific strategies when they help their students. They use a work material that is tailored to curriculum in Swedish language and it is based on the phonics method. .

In this project the author made an attempt to, in a short film, visualizean experience of the organic materials that our bodies consist ofand what becomes of it when we die. The intention was to dissect thismatter, break it down to see it in a simpler form and to explore ourrelationship to it, being part of a constant exchange between organicmaterials and having so much power over the environment and otherliving animals. At the very start, the idea was to deal with the relationshipdifferent people have with their bodies. Later in the process, a decisionwas made that the product would be communicating the author?sown experiences of the body materials after studying it and trying torecreate fragments and feelings of them.

The purpose of this Bachelor degree project is to design different types of services that can increase the amount of re-used timber within the building sector and by that means improve their environmental efforts. By examining how the sectors environmental work concerning recycling and re-using timber as a building material is getting on at present, conclusions have been drawn about what further could be done for improvement.The project has shown that there is a scarcity of information and statistics within the sector, but that there are efforts in progress to change this. Questionnaires have been sent to a number of companies working with demolition and utilizing re-usable materials in order to find out what kind of problems there are within the trade. Unfortunately the survey gave insufficient result due to the low reply frequency.It is obvious that active environmental work within the building sector is important and the knowledge acquired while working with the project has led to the design of three suggestions for services regarded as being of interest for improving the negative environmental impact caused by the sector:Suggestion 1 ? Sale of construction parts prior to the demolition of a buildingSuggestion 2 ? Re-utilization circulation when manufacturing buildingsSuggestion 3 ? Education in relation to the purchase of houses  The positive and negative qualities of the suggestions have been examined with SWOT-analysis and further adaptions and the results have been interpreted.

AbstractDegree thesis Solid content in Lime Mud By Andre Flodin Process operator program ? Umeå University 17/6 ? 2014 Pages: 21A thesis was made on Billerudkorsnäs production unit in Karlsborg where lime kiln in the causticising department of chemical recovery plant does not meet the required production. Causticising department is the final step in the chemical recycling unit. There, the filtered green liquor is mixed with lime to recover the cooking chemicals used in the pulp factory. The cooking liquid is called white liquor.

Haldex Barnes Hydraulics (HBH) is a company which produces hydraulic aggregates for use in forklifts, construction equipment, and trucks. The last two years the company has expanded. This has lead to an insufficient production of aggregates. Thus wishes HBH to increase their production without making to large investments.This report includes a now-state analysis of the problems and where they are. From this a further analysis of possible improvements are made.HBH works mainly with assembling and this is made manually.

The purpose of this thesis is to discuss how a Swedish public library approaches their costumers. I will show how a library interacts with their costumers compared to a business, which has a different economic work frame, a building materials supplier. My aim is to pinpoint differences and explore new methods for the library in order to improve their service.The theoretical frame of the thesis is based on Richard Norman's notion the Moment of truth. The moment of truth is the moment when a business has to convince their customer that they offer both the product, proficiency and service that the customer needs. Service encounters at two organizations have been observed and their differences and similarities compared.

This paper deals with the embalming process in ancient Egypt. Samples were collected from six objects from Medelhavsmuseet in Stockholm. The objects were one supposed ladle and five different contents from pottery. Fourier transform infrared spectrometry (FTIR) and gas- chromatography/mass spectrometry was used to characterize the components of the materials. The result was then correlated with previously made analysis of embalming materials to discover similarities.

LIBRIS is a national library search engine offering information about 6 million books, articles, dissertations and other materials held by Swedish university libraries, research libraries and public libraries. In December 2007 a new version of LIBRIS was launched, developed with focus on usability, simplicity and accessibility. This thesis examines how the new LIBRIS is used, what is working well and what could be improved and also what the users think of LIBRIS. The following report is based partly on a study of usability and partly on a series of tests where librarians, scientists, students and developers have executed a number of tasks while thinking aloud. The users also participated in an interview.

The thesis that follows is performed in collaboration with Nitator in Oskarström.The factory in Oskarström focuses on laser cutting, robotic welding and surfacetreatment of steel for the automotive industry.The project aims to streamline the flow of materials in production by automatingthe movements of the forklifts, running to and from the interlayer, and betweenworkstations.The project started with a systematic literature search. The literature searchshowed the research position around the AGV-system. Also a review of studentliterature was made, so that a suitable method for practical implementation couldbe developed and applied. Selected method uses both quantitative and qualitativeapproaches, which is analyzed by using triangulation.The work has resulted in a modified layout of the current facility in Oskarströmthat can be used for the implementation of the AGV-system. It has also resulted inthe tender documents and profitability calculation from several of AGV-suppliers..

Title: Multi channel publishing: a qualitative study on how Norrköpings Tidningen publishes news in multiple channelsAuthor: Roland AlbinssonThesis supervisor: Per-Anders ForstorpBackground: In this day and age, the media is omnipresent and a part of our daily life. The phenomenon of media convergence can be traced back to the birth of the internet, and today all of the major newspapers have a website of their own. As a result of multichannel publishing, consumers have a wide range of tv channels to choose from, but there is still uncertainty as to whether more channels automatically equates to more and better news. There is no doubt about the fact that multi channel publishing is a necessary survival skill for media conglomerates today, but effects such as news recycling and the concentration of ownership are in conflict with the consumers? availability demands.Purpose: The purpose of this thesis is to, by means of a case study, describe how NT?s multi channel publishing is an expression of media convergence, as well as to study how the news are affected by multi channel publishing.Research procedure: This study is based on three different research methods, observations, text analyses and qualitative interviews.