The report comprises two separate parts:part 1:  Temperature needs for district heating in the paint shop for axles in building 210part 2:  Energy and low temperature waste heat solutions in heating and cooling systems for   building 64 with surroundingsThe paint shop for axles in part 1 has air quality requirements in places for coating of axles. Toachieve desired air properties there are different process ventilation systems, which consist ofventilation coils for heating and cooling, plus air humidifier. The ventilations coils for heating usedistrict heating. Today the ventilation coils use water of 100°C to achieve necessary air demands inthe coating boxes. This part of the report investigates whether the existing system would achievethe air requirements with a water temperature of 75°C instead of 100°C in the ventilation coilsduring the coldest parts of the year.

In the process of making carton boards into Skoghall Mill, are great quantities of water being contaminated. This water has to be treated before it is possible to release into the recipient, Kattfjorden. One of the contaminations that is important to extract from the wastewater, is organic carbon (measured as TOC-total organic carbon) because microbiological breakdown can lead to the bottom becomig free of oxygen.The wastewater treatment at Skoghall Mill is done through an external wastewater treatment that is located at the factory. The biological treatment (aerated lagoon) is a 140 000 m3 water pool with surface aerator, which is give oxygen to the water. In the lagoon live microorganisms who performs the biggest part of the TOC-reduction.One problem with the lagoon is that the treatment of TOC is considerably worse during wintertime than during summertime.

For Skattkärr IF a turf field with warming has been projected to increase field?s utilization hours and to have a longer period for athletes to perform their activities outdoors. The technique chosen to heat the plan is a type of a geothermal heating system without a heat pump. The brine, which is water with 30% ethanol, collects heat from the borehole and discharges it to a coil in the field. There is at position 11 boreholes but it is planned to increase the number to 31, which is the design for the facility.

The purpose of this study has been to evaluate whether a Low temperature bio-mass dryer could be integrated with the local district heating system in Malå. The aim is to increase the thermal efficiency of the cogeneration plant in Malå, by lowering the temperature of the cooling medium. Another benefit that comes from this is improved combustion efficiency at the power plant, since drying the fuel causes an Increase of the heating value.Simulations has been made in Excel, and with use of linear regression, to find out if it is profitable. Data for this purpose has been supplied by the power company Skellefteåkraft and furthermore SMHI.The result of the Calculations shows that a very efficient bio-mass dryer is needed, if yield of investments should be made possible. An Investment of 4,27 Mkr, in a dryer, could at a such criterium return 60000 kr/year, if the price of the biomass is 190kr/MWh.

The purpose of this bachelor´s report is to expand the knowledge about heat supply of a small house in Malmö. The heat supply will be provided from solar panels in combination to two accumulator tanks which will storage the up heated water and a pellet boiler.The technique used here is warmth storage in water over seasons, which will provide the total need of heating for the house. Accumulator tanks in combination to solar panels gets more and more common in Sweden but this far it´s unusual to use it for storage over seasons. This report will highlight many of the difficulties associated whit heat storage and give information about a system's possible design and function.The design of this system is decided early on. An accumulator tank is placed 2 meters down in the earth on the backside of the house.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, temperature and humidity.

The purpose of this report was to investigate how the abiotic factors (temperature, pH, nutrients, oxygen levels and water content) would affect the decomposition of oil-contaminated soil and how a variance in structured soil would affect the decomposition-rate. A minor field-study was made and soil where structured in five different ways (one was a default pile and was used as a reference). The study took place over 137 days and three samples were taken (start, middle, end) and analyzed for aromatic and aliphatic compounds. The result of this study shows that there is a significant difference between all methods for the aliphatic compounds and no significant difference for the aromatic compounds. The abiotic factors that affect decomposition vary from organism to organism, depending on what type of environment it will function the best.

For centuries, springs have played a significant role in our society as water supplies, reasons for where to settle down, and in folklore. There are different reasons why and where a spring forms, e.g. in what kind of soil it has its outflow. Geographic and geochemical surroundings have an influence on spring-water quality.For this project some of the springs in the Lagga perish, Knivsta municipality, Sweden, were selected for a closer study. Water samples were collected from springs for analysis.

Twitching is frequently used in horse management because of its sedating and pain-relieving effects. In this study, the effects on the horse?s nervous system by twitching were investigated by thermography of the skin temperature. The temperature is regulated by the sympathetic nervous system through postganglionic sfincters at the capillaries of the skin. The effects on the endocrine activity have also been studied by the measuring of ACTH and cortisol in blood plasma.

This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, temperature and humidity.

The background of this work is the media discussion about the effect of cultivation on peatsoils on greenhouse gas emissions. It has been argued that row sown and intensivelycultivated crops such as carrots are more likely to emit carbon dioxide than for example grassleys. The association KRAV (an association promoting organic farming) shall, from this yearadapt their environmental policy to be more climate smart and have asked the question if thecultivation of some crops is more climate smart than others? Carbon dioxide emissions fromsoil are due to degradation of organic material and the rate is controlled by microbial activity.The microbial activity is determined by a variety of factors such as temperature, soil organicmatter quality and water content. I have measured the carbon dioxide emission from fourdifferent crops at two different farms.

In Sweden live badgers are used in tests in order to train and prepare earth dogs for hunting underneath ground. This has for several years causeddebate concerning the welfare of the badgers. It is questioned whether the purpose of the dog training, i.e. to reduce injuries in both dogs and prey, is worth the suffering that is reflected on the badgers. The aim of this investigation was to study 1) stress levels in badgers when used in earth dog training, 2) if the stress load differs when the badgers are exposed to dogs with varying aggression levels (low, moderate, high).

The complex sound of someone walking in snow aren't easy to create in a studio. The best way to get the sound is to go out on a surface with real snow and record the footsteps there, but it is a complex procedure to get the right sound on the snow because snow sounds different in various temperature and various kinds of snow. It is important to find the right kind of snow to get the right sound on the foot steps. In a studio, the foley artist can create the sound of footsteps in snow by walking on different kind of material, like potato flour, coarse salt or corn flakes, the question is how realistic this materials sounds and what temperature on the snow they sound like. The results shows that the real snow (warm and cold snow) sounds most realistic and the potato flour sounds like warm and wet snow, the corn flakes some think sounds like cold snowwhile others think that it doesn't sound like snow at all and the coarse salt sounds like snow when it is around -10°C in the air, they all sounds similar in realism compared to each other.

At the beginning of 2011, Sweden started using the European rules for structural design, the Eurocodes, instead of the previous national rules. In both the previous rules and the Eurocodes, it is possible to dimension concrete columns using tabled values. However, the required cross section measurements have increased considerably. Moreover, it is possible to dimension concrete columns using calculations, however, this is unusual.The development of a fire in a fire cell can be divided into the growth stage, the fully developed fire and the cooling phase. The duration of each phase, as well as the temperature, is dependent on a number of factors, e.g.