During the period called Little Ice Age (1400 ~ 1900) the climate of northern Europe was in an annual year-basis overall colder than it was before and after that period. The numbers of short, cold and rainy summers and long, bitter-cold winters where often repetitive under the approximately 500-years the period lasted. In Scandinavia, the coldest time during this period is estimated to have started around the end of the 16th century and lasted to the beginning of the 18th century. Trees growing at the tree-line are limited by temperature for their annual growth and hence showing differences of growth during changes in the climate,  a method called dendroclimatology. The variations of growth can be read in the tree-rings either by analyze the width of the ring or by look into the density of the wood and is used to reconstruct past climates.

This report analyzes disposable packaging and returnable packaging with the methods life cycle analysis and life cycle costs analysis. These two different packaging are analyzed through the company Clas Ohlson?s packaging-flow. To get a picture of how the flow works, a visit at the company and email contact have been done with Clas Ohlson to get relevant informationToday Clas Ohlson has a big flow of articles to the stores without larger variations in the demand, with the exception of autumn, which is when customers start shopping for Christmas. Clas Ohlson?s articles are placed on a pallet and are wrapped into plastic-film for protection and to make sure that nothing will be stolen.

Until the beginning of the 1900:th century the paper making process was handicraft. The paper machines that have been developed since then are as impressing in size as fascinating when it comes to the technique. The process has always been improved to give a better paper for lower costs, with as short manufacture time as possible. Stratified forming has been a reality since 1830. From the beginning it was applied to board and paperboard.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

I samband med att intresset för att bygga högre trähus har ökat så krävs nya lösningar för att t.ex. kunna möta efterfrågan på stora öppna ytor och långa spännvidder. Träbjälklag med lång spännvidd har dock oftast svårigheter med att klara kraven på svikt och vibrationer. Ett nyutvecklat förslag på träbjälklag som förmodas klara dessa krav bättre än traditionella träbjälklag har varit utgångspunkten för detta examensarbete där syftet har varit att undersöka bjälklagets styvhet. Detta gjordes laborativt genom att bygga och testa en prototyp av det föreslagna bjälklaget och genom att en numerisk modell baserad på finita element metoden togs fram och användes för att studera hur olika parametrar påverkar bjälklagets styvhetsegenskaper.Bjälklagets design bygger på fackverksprincipen i primärriktningen och på balkverkan i sekundärriktningen.

A common problem in forestry is plant death caused by frost. The risk of frost is highest on wind protected, flat or low-lying areas in the terrain. Here you often have regeneration problems with Norwegian spruce which is especially sensitive to spring frost. Swedish tree experiments have shown that the black spruce can be a suitable alternative on these areas, for example on moisture frost prone areas. The species originates from North America and its pioneer tree characteristics make it more frost hardy than Norwegian spruce.

Abstract: The purpose of this study was to examine the process of overtraining syndrome as a part of development in sports and careers. It is based on theories about overtraining syndrome and athlete career transitions. The intention was to find patterns that illustrate critical factors in the athlete career for overtraining syndrome to occur, but also for preventing overtraining syndrome to emerge and for rehabilitation.The Informant was a 19 years old man who had completed his studies at a Swedish sports-?gymnasium?. Two semi structured interviews were made, the second as a following up interview.

With climate change, the temperature and relative humidity in Sweden are increasing. The majority of historical environments lack protection against this increase, which also increases the risk of mold infestation in these environments. One of these environments is N??s Slott, in which several rooms have recurring mold growth on objects and furniture. By examining one of the rooms in the castle that is in the risk zone or has mold growth, factors behind the mold growth can be investigated in order to create a basis for future actions against mold.

In Sweden, the demand for bio energy has increased in recent years due to the current energy and climate debate. In 2008, the energy supply of Sweden was 612 TWh, biofuels accounted for 123 TWh of these. Stumps have been highlighted as a potential fuel in recent years and the Swedish Forest Agency expects a technically and biologically feasible potential of 20.7 TWh annually between 2010 and 2019. The idea of utilize stumps is not new. During the 19th century stumps were used for tar production and during the 70?s and 80?s attempts were made to use stumps in the pulp industry.

This report has been done in collaboration with SCA Skog, Norrbottens Forest Management Area. The purpose of the survey is to try to find out what the forest owners who either live in Norrbottens Forest Management area or outside but has their forest holdings in the administrative area has the vision of SCA Forest and their forest services offered by the administration. But also to find out the presences of other timber buying players who procures timber in the administrative area. This study seeks to determine if there are deficiencies that may need changes or improvements to the prevailing conditions in Norrbottens management area. The literature study is about how to design a questionnaire based on what you want to know and what to consider in order to eliminate the problem of constructing a questionnaire. A questionnaire was sent to 400 randomly selected forest owners who have their forest holdings within SCA Forest Norrbotten Management Area. And of the 400, it was 181 respondents with 39 women and 138 men.

The following report comprises my bachelor´s thesis in Industrial design, 30 hp. It is executed in collaboration with Bonum senior housing, who has been the client and assignment- maker of this project.The goal was to design a bench for their entrances, which could represent not only the needs of the target group but also Bonum as a trademark. The work is done with great care for both human kind and the environment, with sustainability as beacon.The design process has been followed.Initially, you will find the definition of a bench for entrances, the framework including inclusive as well as sustainable design, a function- and market analysis followed by the inspiration part of the project. Getting to know the target group and their specific needs has been essential for this work.Investigations about what senior house living and senior products are and what the target group thinks and feels, has been done. As a result, two ?personas? has been developed.With the help of a purposely chosen group of people, surveys and ergonomic studies has been executed, as well as prototype-testing.The fact-finding has formed the stable and unavoidable foundation of this project, which later on gets more creative and idea based.

Denna studie handlar om pelletering som möjlig lönsam marginalaffär vid mindre sågverk/hyvlerier. Studien, vilken skett genom djupintervjuer på plats, omfattar fem olika mindre sågverk/hyvlerier i Småland. Verksamheterna är sinsemellan på många sätt olika men har samtliga satsat på pelletering av ekonomiska skäl och av miljöskäl.Studien visar att pelletering är lönsam men också att det krävs vissa förutsättningar för att långsiktigt nå denna lönsamhet. Den viktigaste är långsiktig tillgång till råvara i form av torrt spån men det krävs även ett genuint intresse och en stor kunskap inom såväl teknik som trä för den som skall pelletera Detta beror på att produktionsprocessen är mycket komplicerad och även beroende av en del yttre omständigheter som t.ex. fukt, kyla och torka.

Biogas is a renewable energy source that is produced by anaerobic digestion of organic mate-rial. In Sweden, biogas predominately comes from sewage water sludge and landfills or from organic waste of households and industries. Small scale digestion plants at farms are espe-cially expected to contribute to increased biogas production in the future. Biogas can be ob-tained directly in it?s raw form and used as fuel in a combustion chamber.

ADORABLE CHILD OF ITS TIMEThis text will describe a inovative project about material, traditions and someideas about furniture for work in an home inviroment. The content is partlyabout exploring ancient marine- and textile techniques to find somethinguseful for furniture of the twenty first century. It is also about the designprocess of creating a sustainable piece of furniture that questions the paradigmathicsabout usage and the context about manufacturing furniture.The text will briefly describe the design process and then reason about theresult in a deeper sense. Questions that has been considered from the verybeginning of the project as well as those one stumbled across during theevolution of the work will be objectives for the discussion. The result will bein focus as a foundation for the discussion and also the values and issuesabout that.

Rapporten ingår i ett FoU- projekt för Högskolan Dalarna, där målet är att ta fram en konstruktion utan ångspärr som ska klara dagens mått på lufttäthet och fuktkrav.Syftet med denna rapport är att utreda hur fukt påverkar en byggnad medmassivträstomme och olika isoleringsmaterial utan ångspärr. Mineralull och träfiberisolering jämförs mot varandra för att se hur dessa påverkarfuktbelastningen i en väggkonstruktion. Testobjektet är lokaliserat i Dalarna, inget fukttillskott har funnits inomhus i byggnaden.För att genomföra detta arbete har tre stycken olika metoder används. Ensimulering, verkliga uppmätta värden och en provtagning. Fuktsimuleringen genomfördes med hjälp av programmet WUFI, uppmätta värden i form av relativ fuktighet och temperatur har samlats in kontinuerligt under två års tid från väggkonstruktionen via mätsensorer.