This report reflects an examination work performed for Getrag All Wheel Drive AB during the spring of 2005. Among the companies range of products there exists some concern regarding the amount of clamping force and friction on bolted joints caused by the assembly torque.The aim of this project has been to determine if there is a simple way in which to identify and then practically apply testing methods for clamping force and friction through utilization of existing testing equipment.Three separate methods of clamping force and friction determination have been tested in rear drive unit, RDU, at a 30 Nm assembly torque. A fourth and final method, screw elongation with ultrasound, has been used as reference. The methods are:?Torque-Tension test.?Screw elongation with micrometer.?Joint stiffness test.?Screw elongation with ultra sound for reference.The results from tests can be viewed in table below.MethodTorque-TensionMicrometerCs=318 kN/mm Assembled with torque wrenchMicrometerCs=318 kN/mm Assembled on lineUltra-soundCS=311 kN/mm Ultra- soundCS=318 kN/mm Joint stiffnessTheoreticalClamping force-21,8 kN17,6 kN17,3 kN17,6 kN17,1 kN17,3 kNFriction-0,110,1470,1530,1470,1520,149.

The swedish healthcare is in many situations one of the best in the world. But still, the healthcare system includes elemnts that reduce the efficiency. Partly becouse the swedish healthcare is largely monopolized, the servicecs are not properly prized and the economic responsibility and the liability legislation is limited. The main problem this study evolves around, is how a different liability rule would change the shape of the healthcare organisation. Abouve all, how would the approach to riskmanagement and preventive and riskreducing performance change with a diffrent liability rule.

Gender is a universal factor that is unavoidable in classroom interaction between pupils and teachers. The principle aim of this essay is to illustrate whether, during the interaction between pupil and teachers still occurs behavior that expresses a gender order. We also want to establish if the ones who attract attention from the teachers is the individual, or if teachers still on a subconscious or conscious level, think of the pupils gender and ascribes him or her some characteristics or qualities. Especially we want to bring out the pupils thoughts and sights of there is a difference on how teachers treat boys and girls. Another purpose we wanted to achieve was to illustrate how teachers work with the concept of equivalence between the sexes, according to Lpo94.Our essay is built on our studies around what teachers think on how they treat the pupils, on the basis of gender perspective.

In a business environment where the stakeholder perspective is evolving and sustainable development is receiving increased attention, it is of importance for companies to adjust. The demand and pressure is exerted from several stakeholders who force companies to take action and live up to the expectations because if failing to do so, negative consequences will most likely be the case. The attention of this study is on ABB Power Products (ABB PP) and their environment and working environment risk management. The aim of this thesis is to identify and describe how perceived environmental risks are managed and what the incentives are to work proactively to minimize the risks. The incentives for a proactive risk management strategy are researched through both a strategic and operational perspective.

My purpose with this work is to find out how it relates with pre-schoolteatchers view about a quality in comparasion to control document, Lpfö-98, and with factors pre-schoolteatchers consider effects quality in pre-school describe pre-schoolteatchers view on that high quality is in pre- school.The investigation has been done by quality interviews with five pre- schoolteatchers working in pre- school. The results show that they do not make a difference between what are high quality and the factors that affect the possibility of creating high quality. Most important is qualified and engaged educationalist in the pre- school who who shows a good attitude towards the children, and where development and learning is central. The most decisive to a pre- schools quality are the personell who work there. A conditon to achieve high quality in pre- school is a head who knows the pre- school activity and its curriculum, and who takes active part in the activity, invites to discussions and offers pertinent competence development.According to the leading document Lpfö-98 you will achieve high quality by offering children rear and care.

In Sweden there are 299 000 working in the construction industry. The construction industry is one of the industries where most accidents occur every year. During the last ten years there have been 111 death accidents in the construction industry and 48 of them were falling accidents. That means, in average, one death accident every month.Falling accidents gives serious injuries to the persons who are affected by them. It is anticipated that this report will investigate the factors beyond the falling accidents and also to present proposals that can decrease the number of falling accidents in the future.To secure a healthy and safe construction site it is of great importance that both the employers and the employees cooperate towards the same goal.

The purpose of this essay is to examine how two riding schools work with their safety. Riding is one of the most popular sports in Sweden but also very dangerous. Sweden has a lot of riding schools and almost half a million that rides. Therefore it?s very important that riding, and especially riding at riding schools has the highest level of safety with regards to harmful events.The purpose leads to the overarching research question for this essay, which is: How does the Safety work look at two riding schools in the area of Karlstad? Out of this question, seven specified research questions have been constructed.

The aim of this work is to develop new conceptual designs for the fairings that are situated between the fin and the rear fuselage on the new version of the JAS 39 Gripen aircraft, called the Gripen E/F. The designs presented should show a profit in the form of lower weight. To achieve weight loss, the possibilities of using other construction materials other than those which are available at Saab today were studied. Therefore, a material survey was carried out in which the market for modern construction materials was studied to get an idea of today?s level of technology.

This thesis describes how the development of a mechanical enclosure to an alarmsystem proceeded. The project was made on behalf of Inferno Light Indusec AB.The goal set to this housing would offer a home alarm in which Indusec?s uniquesound system would give the customer a new alternative on the market. They wantedto, among other things, create an aesthetically but at the same time affordable alarm.The aesthetic theme is something that is missing in today?s market.

The E-department at GETRAG All Wheel Drive in Köping have problems with the efficiency on parts of their production equipment. The equipment with the most significant efficiency problems are four automated multifunctional production cells that produces housing for rear drive units. The major part of the problem is the large amount of small stops that causes the low efficiency.The department already worked with logging of interruptions and efficiency calculations before this project started. However this work was not done to the extent considered necessary for a systematic follow-up of the interruptions.The aim of this paper is to point out a more effective and systematic way to work with logging of interruptions and the follow-up. In addition the equipment were studied with a method for efficiency calculation that ? if used properly- is a more powerful and a visually better method than the one used by the company today.As the initial current state analysis of the equipment was made a lack of documented knowledge about the equipment was discovered.

Our surroundings are currently vulnerable. People can not know when or how to expect nor prepare for a disaster or an accident. The purpose of this essay was to perform a study of the organization and accessibility of psychological and social support in a crisis situation within the community of Lund.To be able to carry out this study we put up a couple of questions that we hoped would guide us, for example; how do the community prepare and set up the service for people in need of support in connection to a crisis situation? As a method we have used qualitative interviews and literature.The results of our study have shown a discrepancy between the ways the community organizes their service for people in a crisis situation caused either by a catastrophe or an untimely death. In case of an untimely death, ordinary resources are estimated to be sufficient while in case of a catastrophe, extraordinary resources are required.

Breakdowns of welded structures are usually a consequence of fatigue loading. Fatigue fractures are commonly initiated in the region close to the weld toe but can also initiate from the weld root and from discontinuities inside the weld. The purpose of this investigation was to examine the weld quality of welded joints produced at Volvo Wheel Loaders factory in Arvika. The goal of the investigation is to give a clearer insight regarding factors influencing the fatigue strength of the welded joints and thereby give a better foundation for fatigue strength calculations.The investigation is including examination of the weld geometry, weld discontinuities and the effects of shot peening. Mainly three different methods for collecting test data have been used: Plastic replicas cast on the weld profile, weld specimens from a rear frame belonging to a wheel loader of model L110E/120E and Almen testing of the shot peening.The results showed that it is not possible to control even transition between the weld material and the base material without after treatment.

A rhetorical analysis of the educational interactive film ?Riskprofilen?, produced by the Swedish Civil Contingencies Agency (Swedish: Myndigheten för Samhällsskydd och Beredskap). This essay uses the theories and methods of Procedural Rhetoric, as described by Professor Ian Bogost, and Visual Rhetoric, as described by Professor Brigitte Mral to analyse the interactive and visual component parts of the artefact, and compares them to the intended purposes of the artefact as stated by documents pertaining to its creation, found to be those of educating the public; marketing the agency; and driving traffic to its webpage. The artefact is through analysis found to fulfil the purposes of marketing the Agency and of likely increasing traffic to the website upon which it is hosted. Regarding the primary, educational purpose this analysis finds that the artefact does not teach a user the accident-avoidance strategies it claims to do, but is dependent upon further materials..

Handen har en väldigt stor betydelse i människans liv. Med handen utför vi många olika slags viktiga sysslor. Vi äter, duschar och klär på oss med hjälp av handen. Vi skriver, sportar och utför arbete med handen. Vi hälsar på andra och kramar de som står oss nära med hjälp av handen.

The construction business is one of the most accident prone businesses in Sweden. In order to make it safer it?s vital that all employees of a company report all accidents and incidents that occur. This report intends through qualitative interviews, to analyze the knowledge and attitude towards incident reporting among the employees of the Swedish construction contractor JM.The goal of the thesis work is to hopefully contribute to an increase of employees? awareness on those issues.