Nanotechnology, one of the most interesting sciences today will no doubt have an enourmous impact on tomorrow's society and industry. One of the most interesting nanomaterial that has been discovered is the semiconductor quantum dot (QD). This material shows interesting novel properties such as a size-dependent band gap, which is an effect caused by the quantum confinement effect in all three dimensions. Due to this phenomenon the absorption spectrum can be tuned to the desired value by adjusting the size of the QD.This thesis aims to investigate how the solvent ratio of H2O/Ethanol affects the optical and structural properties of copper sulfide QDs manufactured in a chemical synthesis way using modern microwave heating. The process of manufacturing QDs using chemical synthesis often involve a capping-agent to prevent the QDs from agglomerate into bigger structures.

The Swedish Transport Agency has for a long time collected data on a monthly basis for different variables that are used to make predictions, short projections as well as longer projections. They have used SAS for producing statistical models in air transport. The model with the largest value of coefficient of determination is the method that has been used for a long time. The Swedish Transport Agency felt it was time for an evaluation of their models and methods of how projections is estimated, they would also explore the possibilities to use different, completely new models for forecasting air travel. This Bachelor thesis examines how the Holt-Winters method does compare with SARIMA, error terms such as RMSE, MAPE, R2, AIC and BIC  will be compared between the methods. The results which have been produced showing that there may be a risk that the Holt-Winters models adepts a bit too well in a few variables in which Holt-Winters method has been adapted.

The goal for this master thesis project has been to investigate the power quality in adistribution grid, which has a high fraction of dispersed power production due towindmills. The study has been done on a grid in Laholm South of Halmstad, whereapproximately 45 windmills are connected to the distribution grid owned by SHKEnergi. The investigation has been focused on to two radialy fed 20 kV lines, wheretwelve windmills are connected.Voltage variations have been studied by creating a model of the grid in the simulationprogram SIMPOW. The largest deviation that has been found in any point of the gridis ±1.9 % of the nominal voltage. This deviation is a result of varying powergeneration from the windmills and the voltage regulation at the connection point ofthe line.

Construction and maintenance of forest truck roads are a necessary element of industrial forestry. Payment for contracting services in this context can be done according to a number of payment models. This study will focus on the methods and consequences associated with a change of Holmen Skog?s payment model from per hour to per metric ton for ballast hauling. The aim of this study is to improve the economic efficiency of Holmen Skog?s ballast hauling in construction and maintenance of forest truck roads. This is done by formulating and evaluating a proposal for a payment model based on crowns per ton.

Staphylococcus aureus belongs to the normal flora. Many healthy people are colonized by the bacterium mainly in the nose but also on the skin and on other mucous membranes without showing symptoms. After damage to the skin, the bacterium can enter the wound and cause infections. Methicillin-resistant S. aureus (MRSA) is resistant to b-lactam antibiotics such as penicillin and methicillin.

Analogue photography is something that many thought died out in the beginning of the 21?st century as a result of the digital revolution. But that?s not the case. As the digital revolution swept over the world a movement of analogue cameras, and so called toycams grew bigger.

Background: Sweden and the rest of the world went through the biggest financial crisis at the end of 2008 since the 1930s. The major Swedish banks have goodwill related to their acquisitions inside and outside Scandinavia. Swedbank, SEB and Nordea has acquired in the Baltic countries and Russia, however Handelsbanken has established itself in Great Britain. The crisis in the Baltic countries led that real wages fell, unemployment rose, real estate prices collapsed and the number of borrowers who had trouble repaying their loans increased rapidly. All this led to the problem of impairment of goodwill in the Swedish banks that had expanded rapidly in the Baltic countries.Aim: The aim of this study is to investigate the application of IFRS 3 in Swedish banks before, during and after the financial crisis, and to investigate the low-downs in the four majorSwedish banks in 2006-2010.Completion: The study is primarily based on the case studies by the examination of the annual reports from all banks as well as evaluation of the interviews.The authors have chosen to makea strategic choice of a small number of cases through the concentration on the impairment of goodwill in the bank sector of Sweden.Results: The result of this study is that there are problems for banks in implementation of IFRS 3 in practice because of insufficient information in the banks' financial statements.Generous estimates used in the calculation of impairment testing.

Denna uppsats har för avsikt att utreda begreppet Just-In-Time (JIT) och dess komponenter för att sedan försöka finna dessa i den svenska lastbilstillverkaren Scanias produktionssystem. Litteratur har bidragit med en definition av JIT som sedan har jämförts med hur Scania arbetar inom produktionen. Empiri har erhållits genom intervjuer med berörd personal samt observationer på plats i Oskarshamn och i Södertälje.För japanerna är inte Just-In-Time-tänket en ny företeelse utan det är något de har arbetat efter en längre tid. Denna uppsats har valt att utgå från Jeffrey K. Likers (2004) definition i The Toyota Way.

This is a study in my preparations for my final concert at the Academy of Music and Drama- ?????????? University. My aim is to create a plan and a schedule for my practising methods and other preparations so I will be able to perform at the top of my ability.I have studied and chosen a collection of methods that will help me prepare for my concert and at the same time develop my oboe playing. As a result, I have found an effective way for me to prepare technically on my instrument. I have also learnt and developed methods in how to focus and mentally prepare for a performance..

When building large buildings, such as compartment buildings, there is a number of deliveries arriving on the construction site daily. In order to receive these deliveries without disturbing the rest of the work going on JM often books a fixed unloading time. When doing that they can be prepared when the delivery arrives. Making sure there is a suitable unloading area, someone to meet the delivery and when needed proper machines, such as a tractor or a crane, to help unload bigger deliveries. The person receiving the delivery is supposed to make an acceptance control where they check the delivered goods making sure nothing has been damaged in transport and that they have received what they were supposed to receive.

The purpose with this exam project has been to explore how satisfied the buyers of forest land have been with their real estate broker through the transfer process. The respondents had the opportunity to rate a number of different questions around the current acquisition. A questionnaire with 19 acquisition-related questions was sent to 134 people. People who since 2008-01-01 until today, have acted as a buyer of forest land. 80 responses were achieved and the result shows that the majority of buyers have a high gathered satisfaction..

Approximately 4000-5000 hectares, of SCA´s forest land area in Västerbotten, are in need of pre-commercial thinning (PCT) every year. Within the management district, the areas annually treated with PCT must increase, in order to decrease the area with an urgent need for PCT. This can be done by employing more forest workers or entrepreneurs, by mechanized PCT or by an extended season for PCT. Positive experiences from a private forest owner, who started to carry out PCT when the first snow came and then continued for several months, gave an idea to investigate the possibilities to prolong the season of PCT. The purpose of this experiment was to compare PCT carried out when there was snow on the ground with PCT performed when there was no snow on the ground.

The purpose of this Master's thesis is to elucidate the phenomenon of storytelling and its methodology in the context of public library story-time for pre-school children. It also strives to give an insight into the functions of story-time both with regard to the storyteller and the participating children. The study is based on qualitative methods in the form of a literature analysis, observations and interviews. The interviews were undertaken with two storytellers from the same library who work with children up to three years old and children aged between four and six years. The result of the study suggests that storytelling is more appropriate than reading aloud in situations when large groups of children are involved.

This study looks into the possibility, and profitability, of expanding a pilot project that has been put into action at GGP Sweden AB in Tranås, a manufacturing company that produces front mowers. The pilot project is meant to give GGP Sweden AB a more precise control of the flow of goods from their suppliers, and its essence has proven to be quite similar to the Japanese Just-in-Time philosophy.The study has been divided into four separate areas; mapping, supplier selection, supplier evaluation and cost analysis. These areas represent a holistic perspective on the expansion of the pilot project and cover topics varying from methods of finding suitable JIT-suppliers, constructing Key Performance Indicators (KPI) to reviewing costs and assessing profitabilities.In this report, the reader will initially take part in the works of mapping GGP?s manufacturing unit, pilot project and supplier base, which results in a list containing the most suitable suppliers for a Just-in-Time based collaboration. Afterwards, the reader will be led into the area of supplier evaluation, where five KPI?s are created with the purpose of ensuring that GGP will be able to evaluate their suppliers and pilot project in an effective way.

Background: The business market today is characterized by tough competition amongst the competitors to capture consumers? interest and money. One marketing tool companies can use to achieve this is the company?s image. The customer buys not only a product, but also the image that the company or the product is associated with.