The purpose with this report is to give structure to the storage area betweenproduction and packaging at Spaljisten AB in Åseda. The purpose is also to givesuggestions for improvements of work tasks and thereby simplify and improve thematerial handling at the packing process.The background of the task is that Spaljisten AB is going to increase theirproduction and thereby they also need to increase the packing rate of theirproducts. They will manage this by installing a new automated packing line andincrease the efficiency of the old manual one. The theoretical background ismostly obtained from literature which contains relevant facts for our report.The storage area has been studied visually in order to search for improvements oftoday?s layout.

Financial bubbles are characterized by a large increase in the economic growth on the market as a whole or in specific industries. The change gives rise to an increase in the capital needed to finance this growth. Companies typically have a choice between equity and debt capital to finance its business and the mix of these types of capital is often referred to as the company?s capital structure. There has been a lot of research done in the field of financial bubbles and ofcapital structure, as of yet no studies seem to address these two areas in combination.The aim of this study is to examine if financial bubbles affect a company?s capital structure and through this also examine if the supposed changes in capital structure can be generalized.The study comprise of two identical time-series which examines the changes in leverage and the choice of financing during the Swedish real estate bubble in the early nineties and the IT-crash at the end of the 2000th century.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

Financial bubbles are characterized by a large increase in the economic growth on the market as a whole or in specific industries. The change gives rise to an increase in the capital needed to finance this growth. Companies typically have a choice between equity and debt capital to finance its business and the mix of these types of capital is often referred to as the company?s capital structure. There has been a lot of research done in the field of financial bubbles and ofcapital structure, as of yet no studies seem to address these two areas in combination.The aim of this study is to examine if financial bubbles affect a company?s capital structure and through this also examine if the supposed changes in capital structure can be generalized.The study comprise of two identical time-series which examines the changes in leverage and the choice of financing during the Swedish real estate bubble in the early nineties and the IT-crash at the end of the 2000th century.

The study reported has been conducted in care service guided by the Swedish law LSS( LSS- act concerning support and service for the disabled). The aim of this study is to examine the experiences of the personnel who have attended the Taktipro introductory course with special focus on how they describe the possible effects this may have had on their daily attendance to their special needs users.The method used is a qualitative method of enquiry, based on interview questions sent by mail to all the participants of the Taktipro introductory course. The result shows that the personnel have a positive view on skills in progress and that this program has facilitated the contact between personnel and their special needs users. An awareness about the importance of physical contact has also been revealed as well as an awareness of their own impact on situations at work. The result also indicates that the personnel feel that they have been able to improve the well being for the special needs users. .

In this essay, I have examined and discussed the similarities and differences between christology in the thought of Cyril of Alexandria and Martin Luther, and further, to what extent Luther may have been influenced by Cyril in his doctrines of christology and Christ?s presence in the Eucharist. By reading texts written by Cyril as well as by Luther, I have tried to describe the position of each of the theologian?s. In the next step, I compared the thoughts of Cyril and Luther, and tried to show on both similarities and differences.

To be able to evaluate different radio waveforms in a laboratory environment FOI in Linköping has developed an experimental system for radio communication called Rasmus. The system consists of a transmitter, a channel emulator and a receiver. The transmitter modulates a digital signal to a desired analogue waveform. The channel emulator is used to simulate a real radio channel. The channel emulator distorts the signal by splitting it up in several propagation paths.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

This paper is a degree project on the C-level, 15 points at University West, Department of Business and IT dept. Informatics. This study is about agile methodology and its impact on IT projects. Requirements management is a process within an IT project, where customer has certain requirements that must be met by an IT system. The difference between the traditional and agile development is in the requirements management process and it can cause problems in a project.

AbstractProblem: This thesis was made by a commission from Svensk Logistikanalys AB (SLA). SLA is a relatively new firm who is working as a freight broker for firms that wants to lower their freight costs. SLA contacted Jönköpings international business school because they experienced a problem with too many firms, that had SLA?s concept introduced to them, but turned down their services. On the basis of this, following purpose of the report has been stated.Purpose: In this thesis we will study companies that have said no to the services of SLA.

2004, the SSR, Akademikerförbundet, made a study on the threats and violence as a social secretary in the municipal social services are exposed in their occupation of the "social secretary of threats and violence at work" (T-110192), conducted by Temo ab. We have chosen to use the study on a smaller scale and then made contact with five municipalities in the middle of Sweden to investigate social secretaries experiences of threats and violence. Using the cross-sectional design and a convenience sample, we have gained access to data from 56 people. From a sociological perspective, we have chosen to use Norbert Elias theory of universal configuration and interdependence, and Michel Foucault?s theories concerning power search explanation for the existence of threats and violent situations in the contact between social workers and their clients..

This report is intended to give an insight in the Network Performance Assessment Modeland the parameters that is needed in the making of a fictitious grid that represents anoptimal grid. A main goal is to investigate how the construction of a real grid iscompared to the fictitious.One of the key parameters is how redundancy is treated in the model and to find theoptimal amount of redundancy versus the costs. Further is the dimensioning of the grid ofinterest. The fictitious grid is based on energy whereas the real grid often is based onsubscribed power and these two principles are compared and analyzed.The difference in the outcome of the model result due to variations in input data of themodel is also discussed in the report..

Over the past one hundred years, there has been an increasing globalization and industrialization of the food systems. As a result, the distance between the production and the consumption of food has increased, both in time and space and in the minds of people. There is also an increasing concern for the environmental effects of industrial farming and the long distance transportation of food. Sustainable agriculture and efforts to build more sustainable food systems has emerged in opposition to the global food market. The definitions of sustainability usually include environmental, social and economical aspects. To build more localized food systems is seen as one way towards increased sustainability.

There are various value-influencing factors that have various effects on the value of a cooperative flat for buyers. What generates value is individual and different from buyer to buyer, but also between buyers and real-estate agents. Consequently, the real-estate agents who perform valuations can make incorrect estimates of a residential value. Therefore, it is important to examine which factors are important for buyers to prevent incorrect valuations. To find out which these factors are and which of them that are the most important for potential buyers, previous research has been done in larger cities in both Sweden and other countries.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.