The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The usage time is an important part of the specification for products powered bybatteries. The usage time is affected by a number of different elements; technical,environmental and how the product is being used. The method to determine theusage time is intended to define how measurements and calculations are to berealized along with influencing factors to keep in mind. With support from thismethod the intention is to gain control on how well the established usage time canbe expected to cohere with the real value and what affects the value.The study is done specifically for hearing protectors with battery powered built inelectronically functions. The functions can be level dependent function forambient hearing, 2-way radio communication, Bluetooth or FM-radio.The first chapter of the report describes the literature study performed in theproject.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

När en kommersiell hamn byggs ut fordras omfattande muddringsarbete för att säkerställa ett brukligt djup för sjöfart. Då stora delar av muddermassorna ofta är förorenade av tungmetaller och miljögifter krävs särskilt omhändertagande av dessa. Traditionella omhändertagningsalternativ består av att deponera massorna på särskild avsedd plats på land eller tippa till havs, något som inte tillåts för förorenade sediment. En relativt ny metod är stabilisering/solidifiering (S/S) som innebär att muddermassorna behandlas med ett bindemedel för att sedan kunna användas som fyllnadsmaterial i exempelvis kajkonstruktioner. Dessa alternativ behöver noga vägas mot varandra med hänsyn till ekonomiska och miljömässiga aspekter.

This thesis deals with the numerical 3D simulation of a four stroke, spark-ignited, internalcombustion engine, which is mounted on a high performance motorcycle. The work, carried outin collaboration with Politecnico di Milano and MV Agusta, focuses on the simulation of theintake, compression and expansion stroke, including combustion simulation, using an opensource CFD code.Simulation of internal combustion engines offers a great challenge in the field of CFD research.Moving boundaries of the solution domain, caused by the motion of the piston and valves, leadsto deformation of the computational grid, with decreasing quality of the solution as result. Basedon this, a previously developed mesh motion strategy was employed where a number of meshesare used to cover the whole simulation cycle. Within each mesh interval the internal cell pointsof the mesh are moved to account for the boundary motion of the piston and valves. This strategywas previously applied to simplified geometries as well as real engine geometries.

This degree project is based on identifying and allocation of costs in a packaging section at Electrolux Distriparts in Torsvik.The purpose of this thesis is to identify the costs that emerge when packaging different articles and show how the costs are allocated. The report also contains improvement suggestions about how the company can use the current computer system more efficient.The methods that have been used in order to approach the problem and the collection of information have mainly been literature study, interviews and observation.The work started with answering the questions; which expenditure cost and direct cost exist in the section, how can they be allocated, if improvement can be done and how the flow of information is supposed to happen.In order to answer the questions we used our former experience and the knowledge we achieved by reading literature, interview relevant persons in the company and observations carried out in the section.Through our studies, we came up with an Excel file, which is the groundwork for a template that can be used by the company in different occasions depending on the situation and need. It is important to remember to modify the template if the presumptions change. In the template, we have identified the different kind of costs that emerge when packaging different articles and we have also allocated the costs. In addition formulas and estimations that are necessary for the cost calculation are presented.The work consisted in making the groundwork for a template.

A recent development in the field of accounting has been an increasing use of fair values in financial reporting. In 2005, this development was reinforced in Sweden by the adoption of the International Financial Reporting Standards. The aim of this thesis is to discuss the problems related to the use of fair values, through a case study of the Swedish investment bank Carnegie. In May 2007, Carnegie announced that the result had been overly stated by 630 MSEK, due to the valuation of derivatives within the trading department. The empirical material consists of documents produced in the legal process between Carnegie and the Swedish Financial Supervisory Authority.

This thesis describes how the chip space and coolant channels are designed in today?s mills, the ideas behind the design and what is considered to be the best method of cooling. It contains ideas on how the chip space can be simplified. It contains several concepts on how the cooling could be designed for better efficiency and manufacturability. There are also suggestions on how the cooling could be stopped when the cutter isn?t cutting.

Bakgrund: Effektiva marknadshypotesen innebär att det inte går att utnyttja systematiska avvikelser på marknaden. Trots det finns det etablerade investeringsstrategier som investerare använder sig av för att generera överavkastning.Syfte: Syftet med studien är att undersöka huruvida det går att generar överavkastning genom att investera i företag som uppvisar en låg eller hög EV/EBITDA-multipel. Variablerna bransch och risk kommer även att undersökas med utgångspunkt från den eventuella förekomsten av en investeringsstrategi som genererar överavkastning.Genomförande: Teori inom området har byggt upp en grundförståelse för problemet, empiri har sedan hämtats från de olika företagen för att få fram EV/EBITDA-multiplar till de ingående portföljerna i studien. Aktiekurser har även inhämtats för att bygga grunden till empirin. Resultatet har sedan jämförts med OMXSPI samt med den riskjusterade avkastningen.Resultat: Av resultatet framkommer att det går att utnyttja en investeringsstrategi där investering görs i låga EV/EBITDA-multiplar.

Syftet med arbetet var att undersöka pedagogernas inställning till lek i skolans lägre årskurser. Vidare att belysa lekens betydelse för den kognitiva utveckling och hur pedagogerna använder leken i sitt dagliga arbete. Metodern är en kvalitativ, halvstrukturerad forskningsintervju med hermeneutisk inriktning och bygger på intervjuer med sex pedagoger. Jag redovisar intervjuerna i fyra olika teman, som kom fram under analysen av intervjuerna. Sammanfattningsvis pekar resultaten av min undersökning på att samtliga pedagoger är positit inställda till att lek och kopplar leken till den kognitiva utvecklingen..

Bakgrund: Ett sätt att minska risker vid handel med finansiella instrument är att bygga portföljer. För att kunna hantera portföljer med olika finansiella instrument och valutor samt kunna hantera flera portföljer samtidigt, används portföljhanteringssystem. Studenter kan genom att använda sig av sådana system lära sig hur finansiella marknader fungerar. Kraven på ett portföljhanteringssystem är inte desamma som kraven på ett kommersiellt system och därför finns det ett behov att utveckla en modell för denna kontext.Syfte: Denna uppsats ämnar bygga en modell i PowerPlus Pro som studenter kan använda sig av för att befästa sina kunskaper och öka sin förståelse för hur finansiella instrument fungerar.Metod: För att bygga modellen har kvalitativ metod används och för att studera hur portföljhanteringssystem ska byggas och anpassas efter studenters behov har kvalitativa intervjuer använts.Slutsatser: Vår modell uppfyller de krav som ställts på den och är anpassad för undervisning på ett universitet genom att den är användarvänlig och pedagogiskt uppbyggd. Modellen lämpar sig inte för användning av markadsaktörer.     .

Eco certification of small housesTo construct an environmental friendly building and show that as a company you care for the environment, is presently very attractive in the Swedish real estate market.This degree thesis covers the environmental certification called ?Svanenmärkning? the Swan, witch is the Swedish equivalent to the European standard ?the EU Flower?. It is concentrated on the certification process in small houses that the Swedish institute of standard, SIS, has presented. We have worked together with the company Faluhus witch is a Swedish producer of small family houses.Faluhus is located in the town of Borlänge, Dalarna and has produced family houses since the 1950:s. They have a great heritage born in the old Swedish mining culture, with great wooden mansions and country homes.

This thesis has been conducted at Volvo Bussar ABunder a period of ten weeks. Within the organizationVolvo, the work is conducted with leaders and teamson every level; from production to top management.They have three tasks, besides executing their dailywork, they are expected to actively work on improvingtheir individual work as well as themselves as persons.The two latter are future value adding activities for theorganization. When doing so, however, it has beennoticed that they often lose the grasp of their dailywork. The question that consequently arises is whythis happens. Is it because of lack of time or it isbecause the co-workers do not have the competenceand simply do not know how they are to execute thethree tasks? Or, is it because the motivation to executethe three tasks is not enough? With this in regard, thestatement of issues for this bachelor thesis were thefollowing: how can the conditions for leaders and theteam be improved, in order for them to execute thesethree tasks.To find out why the execution of these threeassigments did not always succeed, the decision wastaken to conduct a survey and interview study in reallife and at the plants.