Sök:

Sökresultat:

1880 Uppsatser om Real Ear Measurement - Sida 50 av 126

Studie av nötnings- och friktionsegenskaper vid höga temperaturer i Kanthal APMT

During this master thesis, wear and friction properties for the high-temperature alloy Kanthal APMT were studied. The results were also compared to 253MA. The initial tests showed, among other things, that the surface fineness of the muffle tubes matters in real applications like conveyor belts. A 253MA-sample wear-tested against a 253MA-tube showed lowest wear at 900°C while a pre-oxidized APMT-sample wear-tested against a APMT-tube had the lowest mean value of the friction force at 1100°C, compared to all other tests..

Framställning av komponentbibliotek i autodesk Revit. Modellering av köks- och badrumskomponenter samt takstolar

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

Bärförmåga i skjuvning för råspontpaneler. Laboratorietest och FE modulering

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Annonsplacering : Hur placeringen av annonser i artiklar kan optimeras för högre Click Through Rate

The web as an arena for news reporting and information sharing to consumers has grown for many years in the expense of the traditional newspapers. The revenue stream has however not followed the same transformation which has led to a remarkably lower profit when news and articles are distributed through the web. Banner advertising is a method that is commonly used by online magazines to generate profit where advertisers pay to expose their message. One method to measure banner ads effectivity, and indirectly, what the advertiser would pay, is through Click-Through Rate (CTR), how many clicks a banner ad receives in relation to the amount of banner views. One of the variables that play an important role in the banner ad effectivity is the placement of the banner ad.

3D-visualisering av robotsimulering

Visualization is a rapidly growing area of computer graphics. Due to the very progressive development of computer technology and especially 3D-graphic boards yesterdays imagination of visualizations, today is a reality. At Saab Bofors Dynamics in Linköping missile systems are developed. Through the development, different subsystems are simulated before the manufacturing starts. The results of these simulations have to be visualized to get a meaning.

En effektivare byggprocess genom standardisering, kommunikation och erfarenhetsåterföring

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Bostaden – sedd ur kvinnligt perspektiv

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

Förbättrad resistansmätning för grova aluminiumledare

The goal with this master thesis has been to evaluate and to examine the stationary resistance bridge. The resistance bridge uses a 4-point measuring to determinate the resistance, which is used in the manufacturing of the conductor. It is then used when the resistance is to be decided for coarser aluminium conductors. A conductor has to fulfil certain demands to be able to move forward in the process. One of these demands is the resistance in ohm/km, which has demands that the measure values of the resistance bridge are as true and precise as possible. The stationary resistance bridge had been examined through various kinds of measurements to be able to see how stable the system is and how to obtain a measure value as optimized as possible.

Totalresultatet ur ett annat perspektiv -En studie om Latour

Purpose Based on the new comprehensive income due to changes in IAS 1, the authors aim to describe how a listed corporate accounting is affected by IAS 1 and the new income statement.Methodology This study uses an inductive approach with a combination of qualitative and quantitative data, using financial rapports from the investment company Latour. This case study is based on Latour?s all published financial statements under the period 2008 to 2012.Result The study resulted in different observations of Latour's operational and financial performance, share price trends as well as ratios. The study's authors can see that Latour's net income and comprehensive income differ due to changes in IAS 1. They can also observe the effect of clean surplus in Latour?s income statement.

Talutrymme i ett skolklassrum : Av var och en efter förmåga, åt var och en efter behov

The purpose of this study was to investigate interactional patterns in the context of a fifth grade class in Sweden. It was also to investigate whether the interactional patterns of the class and their teacher was subject to any change dependent on the lesson subject, specifically mathmatics and science. The study was conducted through observations and interviews. The results of the study varied somewhat from the results of earlier studies within the same field of research. The girls of this class was more likely than the boys to initiate interaction with the teacher or other pupils.

Klassificering och värdering av finansiella instrument : Ett tillförlitlighetsperspektiv

During the financial crisis voices were raised towards the regulatory framework IAS 39 recognition and measurement of financial instruments and pointed out that it was inadequate. The complexity of the framework contributed to the fact that it was difficult to apply. IASB accelerated the modeling of the new to be regulatory framework IFRS 9. In this study we will focus on the reliability of accounting information, which is an important aspect from the stakeholder?s point of view, for example, to be able to make the best decisions the accounting information should be proper.

Undervattensvågbrytare - En modellstudie

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

Tillförlitlighet hos trafikolycksklassificering

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

Alternativa dagvattenlösningar för nyexploateringsområden med avseende på substansflöden

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

Hur tillförlitlig är värderingen av förvaltningsfastigheter?: En studie av tillämpningen av IAS 40

This thesis studies the way valuation of investment properties is conducted in accordance with IAS 40 and how reliable these valuations are. This has been conducted by studying ten Swedish real estate companies listed on the NASDAQ OMX, during the period 2005-2008. The study shows that all companies use valuation models to determine the fair value of investment properties. Two different types of models have been identified. Companies that use the cash flow model show inconsistencies in time horizon, and how they determine the horizon value.

<- Föregående sida 50 Nästa sida ->