On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

Even if the main purpose is to decide if the companies profitability and financial position is a determining factor for its growth, the purpose is to determine if there are any differences between big and small companies in there economical positions then they grow, in the selected industry. This thesis is mainly a quantitative study. The selected industry for the study is extraction of turf. The financial measurement that most clearly differ the growing companies from the not growing companies or the companies that didn?t change there amount of employees was the returns of the companies own capital.

AbstractTitle:The Impact of Management Control Systems on the Purchaser Function - A study of Scania and Sandvik Authors: Mohammad Reza Akhbari and Johanna Sullivan Svensson Published: 2011 Keywords: Management control, purchasing function, impact, control, control instruments, Key Performance Indicators, measurement, communication and organizational structure. Background and problem formulation: In order for a company?s business idea or vision to be fulfilled, the management of a company needs assistance from various means to intentionally affect the operation in the desired direction. Management control concerns activities of both financial and non-financial character in order to implement the strategy of a company and to reach profitability. Since the purchaser function is responsible of spending 50 percent of a company?s total revenue, the function has an optimal starting point to be a key actor in the shaping and execution of a company?s strategic plan.

Fält Elektronik AB i Kalix utvecklar och tillverkar bland annat larmsändare för fast uppkopplade larmnät. Fast uppkopplade larmnät används för att åstadkomma övervakad och säker överföring av larm och annan information mellan tekniska system för skydd och säkerhet. Larmöverföringen är ständigt övervakad från larmanläggningen ända fram till larmcentralen. Ett problem som idag finns i larmnät är att om man tappar kontakten med en larmsändare så vet man bara att man tappat kontakten, men inte varför. Därför vill man nu utveckla ett instrument som kan mäta och kontrollera vad som orsakar att uppkopplingen bryts t.ex.

The purpose of this essay is to examine if the municipality has a real freedom of action to control the use of the land and the shaping of the buildings in a large and prestigious building project.In Karlstad there is now (2006) a large building project in form of a shopping mall. This project is in its final stage of completion and offers me a suitable case to examine. To undertake the purpose of the essay, the following research question is formulated:Do the municipality have a real freedom of action to control the use of the land and the shaping of the buildings in a large and prestigious building project as the Mitt I City project?In an attempt to examine the project and the planning process, three themes are applied. The first theme derives from the hypothesis that the part that initiate the process gets the upper hand as future discussions are taking place in relation to the original ideas.

A great amount of todays drivers? are constantly exceeding the speed limits on the roads. As a consequense of this, a large number of speed redusing devises, for example speed bumps, has been built around the country. As reports in local medias point out, the acceptance for these types of speed reducing devises, differs and there are many thoughts about location, construction and effect on the traffic safety. This paper approaches the complexity of these problems from the drivers? point of view, based on literature studies and a questionnaire. The goal is not to argue for or against speed reducing devises, but to try to find the source of annoyment and how to proceed further. Some of the problems turned out to be easy to fix, for example porly marked speed bumps.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

Opcon Powerbox is a product developed by Opcon together with the underlying company SRM (Svenska Rotor Maskiner) where surplus heat from the industry is used through an Organic Rankine Cycle (ORC)?process to produce electricity. An ORC-process is a thermodynamic circle process in which a refrigerant is used as the working fluid. The refrigerant makes it possible for the circle process to operate at lower temperatures than the conventional Rankine process.In this master?s thesis a data analysis software for the Opcon Powerbox has been developed in which measurement data is retrieved and handled from the Opcon Powerbox.

Even if the main purpose is to decide if the companies profitability and financial position is a determining factor for its growth, the purpose is to determine if there are any differences between big and small companies in there economical positions then they grow, in the selected industry. This thesis is mainly a quantitative study. The selected industry for the study is extraction of turf. The financial measurement that most clearly differ the growing companies from the not growing companies or the companies that didn?t change there amount of employees was the returns of the companies own capital. It was also the returns of the companies own capital there the main difference existed between the big and the small companies.

Certification systems, that assess companies? work with social and environmental issues, have emerged in an increasing number of industries. Today, there are environmental certifications for the food industry, the forestry, the fisheries sector and several more. In apparel industry, certification for sustainable working conditions has been of major impact. The property sector is no exception from other industries.

The aim of this essay is to study the decision making process and implementation of the principle of political participation and influence for Roma minority in Sweden. The results regarding the decision making process is structured through a discourse influenced policy analyses. Problem picture and recommended measures in the political documents representing the decision making process are analysed through theories of minority rights and equality. The implementation is seen through, by the author given minority discourse and the work in the roma council and analysed by the same theories already mentioned.The results show that regarding the decision process the aim of art.15 in the framework convention is based on the idea of equality while the Swedish documents relates more to an idea of the right to speak for the group. Regarding recommended measures, the framework convention gives several recommendations on specific measures for political participation while the Swedish documents focuses on the general politics of the state.

Introduktion/Problembakgrund: Earnings management (EM) är ett problem för både det enskilda företaget och samhället. EM innebär att företagsledningen manipulerar resultatet i syfte att vilseleda externa intressenter. Konsekvenserna av EM är ett minskat förtroende för den finansiella rapporteringen, vilket resulterar i en ineffektiv kapitalallokering. Tidigare studier i Nya Zeeland har konstaterat att sammansättningen av fastighetsportföljen påverkar benägenheten till EM. Däremot går resultatet inte att generalisera i andra länder, eftersom det finns skillnader i lagstiftningen.