The aim of this Masters thesis is to review Swedens unique law against TV-commercials intended for children under twelve years old. The law has to be abided by TV 4, but not by Kanal 5, so the aim is also to compare TV 4 and Kanal 5 and to see in what different ways commercials are shaped in the two channels. The cultural policy analysis is based on our aim and problem. We have also had the terms semiotic and intermediality in mind together with a model made by the researcher in semiotics Roman Jakobson. The model consists of six different communicative functions.

Cannibalism can have major influence on fish population dynamics. A prerequisite for cannibalism is that the cannibal and the potential victim meet, and besides density effects, the encounter rate between cannibals and their victims is therefore also largely dependent on habitat use and habitat heterogeneity. In this study I quantified and compared the potential for cannibalism in stream-dwelling European grayling populations in three rivers in Jämtland by means of habitat classifications. I also analyzed population dynamic consequences of varying the potential for cannibalism in terms of intensity, using a physiological structured population model. Findings based on habitat characteristics were that the potential for cannibalism is in general not favourable in these types of streams.

Single vehicle accidents are one of the most common types of accidents that occur on the Swedish road network. Depending on the design of the road, the presence of a crash barrier and embankment on the roadside, the outcome of a roadside collision can lead to serious injuries and even deaths.The aim of this project is to investigate the possibility of improving road safety by designing the optimal roadside area based on the results of a life cycle cost analysis (LCC).The questions that have been answered during the duration of this project are:1) Describe the current technical solutions for roadside area design and the various barrier types used in Sweden.2) Complete an existing mathematical model that has been developed by Hawzheen Karim, for calculating life-cycle costs for various roadside areas.3) Calculate and compare the life cycle costs for the side area with a barrier and without a barrier.By performing an analysis of the documentation on the current guidelines and rules for shaping the roadside, was it possible to describe the current technical solutions for the formation the roadside as well as the current roadside barriers in use today. A mathematical model for calculating the life cycle costs of different barrier types had already been developed by Hawzheen Karim. This model was supplemented so that it could calculate life-cycle costs of the roadside region with and without a barrier. After the model was completed, an analysis was performed to obtain life-cycle costs of a roadside with and without a barrier.The result showed that there is a clear relationship between the slope inclination, fill height, and the rate at which the costs rise.

We have been able to draw some conclusions based on our research. First we haveconsidered that the publisher is dependent on a large network and to work closelywith their customers. We can see that the competition in the music industry hasgenerally increased, the technological progress has created new opportunities, and asa result of this, new players have joined the music industry. We have been able todraw conclusions in the fact that more companies and songwriters start up their ownpublishing company, resulting in an increased competition for the individualpublisher.We can also see as a final result that music is used in lots of different contexts andthat the publishers thereby are offered a wide range of business opportunities, but thatthe solvency of the customers has become lower. With this knowledge, we canconclude that the publisher?s power and revenues will increase, and that the publisheras an actor has been given a more important role in the industry.

Academic research indicates that critical publicity can have a detrimental effect on brand attitudes. The negative effects have been showed to be buffered by cognitive bias elicited by strong favourable attitudes, commitment, brand certainty and brand identification. It has been proposed that the influence of such bias in a news reporting context should be studied, something that also is interesting from a brand perspective. The study therefore investigated whether a well-publicised scandal in one period can lead to increased critical publicity in the coming periods. A case study of Swedish grocery chain ICA was conducted.

Weber and Linder (2005) have enlightened that the focus of the current debate on the budget?s to be or not be, has been on trying to find a general tool, which fits best in all situations. They argue that the budget may be more appropriate for organizations in certain circumstances, than for others. They claim that there is a gap in research concerning the situations in which the budget may be appropriate, or when Beyond budgeting is preferred. It is this gap we are trying to fill with our thesis.The purpose of the thesis is to explain which situational factors that affect the organization's use of budgets for the functions the budget can fulfill.

The network with its virtual business structure challenge the established vertical business structure. Part of the network theory that has developed focuses on relationships that forms B2Bnetworks. One way to create a B2B-network is for independent businesses to form a organization promoting co-operation. For co-operation to be successful it requires well thought-out actions, but a lack of how these actions are implemented have been noticed. This study explores how encouragement of co-operation can be done practically.

The aim of my thesis was to do a Life Cycle Assessment (LCA) of an average thread tap that is manufactured by Dormer Tools AB, and to create a practical model that the company can use in order to study other thread taps from an environmental perspective.The method of LCA is used to investigate the environmental effects of a product during its life cycle. This is a gate-to-grave analysis with focus on steel and thread tap manufacturing, coating procedure, use, waste management and transports. Three common coating types were compared separately. Steel manufacturing answers for the highest energy and raw material consumption under the life cycle of the thread tap. Its emissions contribute to global warming, acidification and eutrophication above others.

This study is based on my work as a teacher of Swedish language and literature to upper secondary school students, and my interest in developing the teaching of literature by using both new criticism theories and theories of literary perception focusing on reader response. The purpose of the study is to examine the learning process in trying to develop literary competence and to find out how to describe the competence shown by the students. My starting-point is a discussion about literary competence and the theory and model of literary competence by Örjan Torell. In examining literary competence, by how students use their constitutional competence as well as performance and literary transfer competences, Torell´s model shows the possibility and the need for both knowledge of literature and personal reception by focusing on the dialogue between author and reader.The method is qualitative and the empirics are material collected in one senior high school class in the Social Science programme during their second and third year. The material contains written reading logs, written answers to tasks and transcribed recordings of discussions of literature.The analysis shows a variety among the literary competence shown and developed by the students and points to the complexity of understanding the concept of literary competence.

Our Bachelor´s Thesis has been performed in co-operation with Bors Automation & Tool AB.Our task was to develop a servomotor powered tube cutting-machine with initial point fromtoday's hydraulic driven tube cutting machine Bors HYD 23. The purpose with the newconstruction was to achieve a more power-efficient tube cutting machine which could lowerthe power consumption, and also meet the market continued growing demand forenvironmental-conscious production.Bors Automation & Tool gave us relatively free hands in order to enable new thinking ideaswithout following their traditional constructional solutions.Our solution resulted in a construction based on a power source existing of a servomotordrivenrollerscrew, witch provides a more rational use of energy compared with the currentmethod.Bors Automation & Tool AB has decided to fabricate a prototype of Bors E 23 during theautumn of 2007, which they are planning to revile at the Tube 2008 exhibition in Düsseldorf,Germany.NOTE:Due to an agreement signed by the authors in the beginning of this project, no appendix is published at this time.If you want to wiew these documents, please contact the authors..

This study is mostly based on previous research, which includes Sub-national actor?s attitudes and regional action towards the European Union. The purpose of the study is to investigate if four Swedish municipalities in Värmland operate internationally towards the European Union and deepen an understanding of their actions. The main research question is: - How can we increase our understanding of municipal action against the European Union? The research questions of this study are answered through qualitative method and semi-structured interviews were conducted.

In our globalized society massconsumption is widespread. However there is a trend showingthat people are starting to re-use clothes instead of buying newly produced garments. Reasonsfor buying secondhand clothing are many. During the 1950s people strived to look likeeveryone else but in the 1960s this changed. Subcultures grew stronger.

This study is based on my work as a teacher of Swedish language and literature to upper secondary school students, and my interest in developing the teaching of literature by using both new criticism theories and theories of literary perception focusing on reader response. The purpose of the study is to examine the learning process in trying to develop literary competence and to find out how to describe the competence shown by the students. My starting-point is a discussion about literary competence and the theory and model of literary competence by Örjan Torell. In examining literary competence, by how students use their constitutional competence as well as performance and literary transfer competences, Torell´s model shows the possibility and the need for both knowledge of literature and personal reception by focusing on the dialogue between author and reader.The method is qualitative and the empirics are material collected in one senior high school class in the Social Science programme during their second and third year. The material contains written reading logs, written answers to tasks and transcribed recordings of discussions of literature.The analysis shows a variety among the literary competence shown and developed by the students and points to the complexity of understanding the concept of literary competence.

 This paper evaluates the effect of exchange rate risk on the sum of bilateral trade. To distinguish the effect between different types of countries, two groups are defined: advanced and developing economies. Economic theory on exchange rate risk and trade proposes ambiguous effects of increased volatility. However, the ex ante hypothesis is that developing economies are more sensitive to volatility. Contrarily to the hypothesis, the empirical results suggest that advanced economies would benefit up to twice as much from a removal of exchange rate risk.

Systemutveckling omfattar alltmer komplexa och tidskrävande uppgifter, vilket lett till större fokus på användningen av metoder och processer. Systemutvecklingsmetoder är ofta generellt beskrivna för att passa flera olika typer av verksamheter och projekt. Generaliseringen gör att metoden passar alla och ingen, vilket kan föranleda att den måste anpassas för att ge optimal hjälp och vägledning till en enskild verksamhet.Detta arbete belyser hur systemutvecklingsprocessen RUP anpassas, införs och används inom ett företag, samt vilka problem som är förenat med detta. Studien omfattas av en fallstudie som gjorts vid ett större mjukvaruutvecklingsföretag.Resultatet visar att processen inte används i sin helhet, utan att delar valts ut och integrerats med befintlig metodik. Anpassnings- och införande arbetet har organiserats som projekt och resultatet har dokumenterats i development case.