The aim of this study was to increase the knowledge about whooper swan (Cygnus cygnus) ecology to enhance the ability to predict and also to prevent the crop damage they cause. The largest proportion of damage in Sweden has been reported at stopover sites during spring migration in February, March and April. Therefore, this study focused on an important stopover site, Lake Tysslingen, situated in south-central Sweden. Specifically, the relation between the duration and period migrating swans stage at the stopover site and mean temperature (measured at three different weather stations) for the years 2001-2010 was studied. Furthermore, the swans´ selection for certain fields in relation to field type, distance to roosting site, a supplemental feeding site and forest edge within agricultural land surrounding the lake was analyzed.

The aim of this study was to increase the knowledge about whooper swan (Cygnus cygnus) ecology to enhance the ability to predict and also to prevent the crop damage they cause. The largest proportion of damage in Sweden has been reported at stopover sites during spring migration in February, March and April. Therefore, this study focused on an important stopover site, Lake Tysslingen, situated in south-central Sweden. Specifically, the relation between the duration and period migrating swans stage at the stopover site and mean temperature (measured at three different weather stations) for the years 2001-2010 was studied. Furthermore, the swans´ selection for certain fields in relation to field type, distance to roosting site, a supplemental feeding site and forest edge within agricultural land surrounding the lake was analyzed.

This bachelor thesis in Landscape Architecture is about the planning and design of public spaces in small towns in Sweden. My opinion is that the small towns often are overlooked and my determination is to see if that is right. The purpose with this thesis in Landscape Architecture, with focus on a durable society is to find the central public places in small towns and evaluate their function. This thesis has a focus on good design of central public spaces, designed for the inhabitants of the small towns. A small town, which is the focus of this thesis, is defined to have 200-2000 inhabitants. The small towns, which often are built around industries or the railway, have since the nineteen seventies a problem with people leaving them for the cities in the urbanization. Currently there is also the opposite trend with people moving out from the cities, but to live on the country side, not in the small towns.

The Swedish prehospital/ambulance organization has the last decades evolved from a transport organization to a an organization that focus on alleviate and treating acute medical conditions in the field as well as transporting patient to the emergency ward. The ambulance service is developing continually and offers today a high-tech and highly specialized nursing/care. Which in turn demand a higher standard and competence on the care provider. Ambulance mission can vary in priority and magnitude. This in turn demand a high medical competence our capacity.

Vår kandidatuppsats syftar till att undersöka stations- samt väntsalsmiljön vid Göteborgs järnvägsstation. Vi har valt att genom en kvalitativ undersökning belysa hur affärs- och turistresenärerna upplever stationsmiljön samt vilka behov de har.Göteborgs resecentrum har idag omkring 40 000 besökare varje dag, vilket ställer stora krav på tjänstemiljön som förvaltas av Jernhusen AB. Väntsalsfunktionen på stationen sköts av ett dotterbolag till Jernhusen AB som heter SRAB. Många av affärs- och turistresenärernas behov är gemensamma, som till exempel behovet av toaletter, matställen och sittplatser.Hos turistresenärer kan även andra behov dyka upp, som till exempel att lätt kunna göra sig av med bagage samt information om staden och dess sevärdheter. En målgrupp som affärsresenärer har ett större behov av en arbetsvänlig miljö än många andra resenärer.

Eutrophication is an environmental problem that affects more than ten percent of Swedish lakes. Excess nutrients increase the growth of algae, and cause major problems in the ecosystem through oxygen-free bottoms, fish kills, and at worst dead bottoms. Agriculture accounts for 44% of human emissions of phosphorus to lakes and rivers. Leaching occurs of particle bound phosphorus and of dissolved phosphate. The amount of phosphate in the soil solution that may be leached is partly due to the prevailing pH in the soil solution. The purpose of this study was to investigate how the relationship between phosphate solubility and pH was affected by liming.

Vattenkraftstationer, med dammar och turbiner, utgör hinder för nedströmsvandrande smolt. Syftet med denna studie var att undersöka turbindödligheten för öringsmolt (Salmo trutta) vid två kraftstationer, de befintliga ytlänsarnas avledningseffekt och om effekten kunde förstärkas genom mörkläggning i form av övertäckning av kraftkanalen med en presenning vid turbinintaget. Utöver detta var avsikten även att undersöka om det fanns något samband mellan smoltgrad och smoltens förmåga att förflytta sig mot havet. I Emån i Småland fångades 46 öringsmolt som radiomärktes och sattes ut vid två kraftstationer och pejlades dagligen i sex veckor. Det var en större dödlighet vid den övre stationen än vid den nedre.

Today there are many applications of digital terrain models (DTM) and the requirements of low uncertainty increases. Most of the DTM are produced with Global Navigation Satellite System (GNSS), terrestrial laser scanning (TLS), airborne laser scanning (ALS) and total stations. Guidelines for the preparation and verification of DTM are found in Swedish Standards Institute ? Technical Specifications (SIS-TS) 21144:2007 and SIS-TS 21145:2007. These were defined in collaboration between Swedish National Rail Administration, Banverket, and Swedish Road Administration, Vägverket, to satisfy the needs of requirement formulations in the production of DTM planning, design and construction. The purpose of this paper is to produce and control DTM over Åkermans kulle, located west of the University of Gävle, according to SIS TS 21144:2007 using GNSS with network-RTK, TLS and ALS.

This thesis was conducted at Mälardalen University in Västerås and Härjeåns Nät AB, mainly in Sveg. Härjeåns Nät AB is a network company that delivers electricity in Härjedalen municipality, Ånge Municipality, Ragunda and Bräcke municipality. The maintenance and dismantling of electricity and broadband networks generates a lot of waste. The purpose of this work is to present proposals on the management of the waste. The goal is that all of Härjeåns offices should have equal management for the waste and an overview of how to manage the various wastes.

Ericsson AB in Katrineholm is a part of the Section Business Unit Network in the Ericsson Group. The plant's main task is to produce printed circuit boards in small volumes with a high product mix and focus on delivery and cost effectiveness. At the factory they produce printed circuit boards in the Module department.The Module department has for a long time had a high output of non-approved circuit boards in their production. This has led to a growing stock of non-approved circuit boards on the company?s repair department.The purpose of this thesis is to investigate how Ericsson in Katrineholm can increase the outflow of approved articles in their test process in the Module department.

Evaluation of machinery costs is necessary for selecting appropriate farm machinery. Timeliness cost due to untimely operations is an important component of machinery costs. Timeliness costs can be high for crop sprayers, since pesticide application must be carried out within a short time interval. This Master thesis investigated the timeliness cost and the probability of a suitable workday for spraying. Timeliness factors were estimated for four different crops (oats, spring wheat, winter wheat and barley) using historical weed trial data.

Under litteraturstudierna fick författarna en uppfattning om att järnvägsbranschen är präglad av en hel del problematik som visat sig i ett flertal brister. Flera större omorganiseringar hade skapat en bransch med otydliga ansvarsgränser och otydliga roller med en mängd utdragna rättsliga tvister mellan beställare och entreprenörer som följd. Stämningen beskrevs som dyster och kompromisser mellan järnvägsaktörer förekom inte i den mån som behövdes, utan aktörerna tänkte mest på sin egen verksamhet. En ändring behövdes.Rapporten är begränsad till tre nyckelaktörer med koppling till järnvägsunderhåll: beställare, entreprenör och trafikutövare. Fokus har lagts på det alltför förekommande avhjälpande underhållet, som visar sig i form av trafikstörningar och trafikstopp.

This master thesis sets out to compare the different public transport modes in Stockholm city.Both energy consumption and air pollution are compared. The chosen transport methods are car,bus and metro.Traditionally the rail industry has had environmental arguments as a strong competitiveadvantage when it comes to passenger transportation. However, in recent years the automotiveindustry has been getting more positive media attention regarding environmental issues, forexample Roger Kemp?s statement that the car is the most environmental friendly passengertransportation mode in the UK. This study will show the environmental advantages of railwaytraffic in cities.The energy sources of the world are not endless and the use of the different sources affects theenvironment in different ways.

The distance between home and work has increased in recent decades. By the development of infrastructure and public transport, jobs farther from home have become more accessible and this development has in turn increased commuting. Commuting travellers often pass over administrative boundaries which often serve as borders for public transport pricing. Also the market control prices. Research shows that travel times and costs significantly affect commuting choice.

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.