Background: Traditionally defined boundaries and borders between organizations are at present being re-evaluated because of new and tougher demands. Today we can see a trend where these boundaries are being lowered or even eliminated when organizations choose to co-operate instead of compete. Purpose: In order to create an understanding for the partner selection process in the newly founded joint ventures between the companies which are building the Swedish 3G Network, the determining factors are being studied. Delimitation: The studies companies are co-operating as network operators but are at the same time competing as mobile operators. This relationship is in the literature described as co-opetition, which will not be investigated in this paper.

The harbour in Arvika is closed down and the industry that has been established in the area is now beeing wound up. A deepened comprehensive plan for the area is under progress in the municipality. The intentions are for instance that the harbour should be integrated with the city and that Arvika is facing a lake should be more apparent from the city center. The harbour should also contribute to a more attractive city. These intentions have hence been the starting point of my undergraduate theses, which has resulted in a proposal on how to develop the harbour. During the process I have analysed the city image, how the area is used today and the public places in the city centre.

In Sweden, responsibility for the collection and recycling of packaging and newspapers lies with the producers. Therefore, the major producers created a jointcollection with 5800 recycling stations. The stations are the responsibility of a coordinating body, Förpacknings och Tidningsinsamlingen (FTI) which ensures Government regulations are adhered to by the producers.In 2006, the Swedish Environmental Protection Agency (EPA) carried out an evaluation of the collection of packaging and newspapers. EPA´s research showedthat 80 percent of households were satisfied with the collection but that there were also shortcomings, including problems with littering at the recycling stations.We have tried to approach the litter issue from different angles in order to suggestpossible measures to reduce the problem. An important aspect proved to be uncertainties regarding the concept of operators.As there are currently many parties involved in the collection process this lead to the issue of who is legally considered as the operator of the recycling stations.

Holmen Skog is currently using a GPS-program called TraktInfo, originally developed within the company. They are now planning to switch to a new GPSprogram or allowing the contractors to buy other programs available from the logging equipment manufacturers. To be able to offer this flexibility, Holmen Skog needs to obtain information about the features offered by the different manufacturers in their specific programs, and also when the manufacturers are planning to start selling programs adapted to the new standard called StanFord2010. According to the study, the manufacturers are hesitant to StanFord2010 and there has also been a lack of clear signals from the customers and clients about what kind of different new features to include in the programs. The feature most frequently used by forest machine operators today is the option to keep record of the harvester?s path by creating a ?log plot?. This feature was not used to its full potential however, since only one out of eight of the forwarders included in the study had computers that were compatible with the harvester?s computer.

The ongoing construction of Kristianstad is a trade mall in the city center, the City Hall and the railway station neighborhood is rebuilding, new residential projects are planned and "The healthy garden", "Accessibility for everyone" and "ERA-farms" are also current. Kristianstad has always a sustainable way of thinking in the background during the development and they are trying to meet all three perspective of sustainability: economical, ecological and social. The municipality seeks knowledge both by sharing their own and takes part in other municipalities in the development process..

Roads and railroads have significant impact on the surrounding landscape and the wildlife living in it. This study aims to provide an overview of the effects caused by railways to reindeer, roe deer and moose in Sweden in order to make more detailed assessments within this topic in the future. The method used is a study of literature on the subject and a synthesis of databases with information about wildlife mortalities, traffic intensity and fences in the study area; northern and central Sweden. The databases were used to compile digital maps using ArcGIS. Infrastructure brings change to the surrounding landscape and its function as habitat for wildlife. Railroads cause barrier effects such as fragmentation, wildlife mortality, loss of habitat and loss of connectivity.

AbstractThe subject for this thesis is the Swedish gaming monopoly. This thesis describes the Swedish legislation that regulates the market for gaming in Sweden. The European legislation is also explained in the thesis; both the rules in the EC treaty and the rulings made by the EC court of justice (ECJ). The purpose with this is to see if the Swedish legislation can be upheld considering the rules set up by EC law. The second part of the thesis is focused on the actuality of the problem and the future possibilities for the regulation.

Ever since ABB has begun diecasting their rotors instead of permanent mold casting it,variation in the quality of the cast has arisen. Diecasting is performed in three differentmachines, M1, M2, M3 with 400, 660 respectively 800 tons of die locking pressures.The aim of this thesis is to answer the following questions:What is the ?right? cast quality? How is the right quality achieved?For sizes 160-180 solutions will be proposed that consider eccentricity between thelaminate and the short circuit ring as well as elimination of the thin Al film that appearson the outer periphery of the rotors.Through considering the statistic material the most often diverging rotor type has beenidentified and one of the actual rotors has been sent to a laboratory to be analyzed inorder to establish the current defects. The result of the analysis shows that there areplenty of gas- and oxide-porosity.It has been proved that every time the dies temperature decreased below 120°C thecontent of gas porosity increased. It is due to rapid solidification of metal that flowsthrough the ?cold? laminate.It has confirmed that enhanced porosity in squirrel cage causes high impedance in therotors.

This final project includes an analysis and a programme proposal for the area Bergsbrunna södra. The area is situated along the railway between Uppsala ? Stockholm, just south of Uppsala city. A new railway station is planned here, which make the area attractive as residential area. There are several values to take into consideration when developing an area. An extensive analysis and valuation may define and protect different characters and values, and also find the places most suitable to build upon. The area consists of three separate characters of landscape: the wide open cultivated fields, the hilly wooden ground and the more varying little valley. There are visual, cultural, social and ecological values to preserve. The south part of the area is woods with high natural values that borders to a national park in the natural forest of Lunsen.

The main purpose with the essay is to look into NATO and annalise how the organisation haschanged it´s security policy work process today 2015, seen from two different world eventsduring the period 1989-2015, the collapse of the Berlin wall and war in Afghanistan. Purposeand issuses also apply based on two theories Anarchymodel and World society model. In orderto highlight two different ways to see NATO:s security policy work process over time untilthe present day.Issues:? How did the fall of Berlin wall in 1989 change NATO:s security policy work process?? How did the war in Afghanistan in 2001 change NATO:s security policy work process?The essay is a qualitative method literature review describing NATO as an organisation andworld events that had impact on NATO over time.The result show that NATO has shifled it´s borders further fast because ?new? membercountries from the former Soviet Union are party members. NATO has moved closer toRussia, and increased in momentum.

The problems with train-induced vibrations are increasing with heavier and faster trains. Therefore the work with propagating vibrations is of outmost importance, and that is what this thesis relates to.To get a sensible idea of the propagation, calculation models are often used. Propagation calculation models takes into account factors such as distance to the railway, the ground material and the velocity and weight of the train. This work is mainly about finding suitable existing models and, if necessary, adjust them to be more useful with modern trains and railways.The report contains the work of adjusting one such model and does, despite the fully functional adjusted model, describe how much more there can be done within this topic. Finally, a few tips about specific areas that preferably should be studied to get even further knowledge about the troublesome problems from railways..

In recent years, the Swedish railway track system has been neglected in terms of capacity and maintenance. To adapt the existing system to current traffic load there is a great need for extensive improvement and maintenance. Shortcomings are especially occurring on older embankments running over soft subgrades. To select the most suitable method for reinforcement of the embankment, it is important to evaluate different solutions from a life cycle cost perspective. In long-term perspective, it is often shown that a method with low investment cost causes a higher maintenance cost and a shorter technical lifetime.

The aim of this paper is to describe how to measure welfare effect of the deregulation and increased competition of the public transport by railway in Sweden. The paper also includes a numerical example of how to measure the welfare effect. In our study we use public data from SJ regaring quantity and ticket prices for the period 1996 - 2005. We have used equivalent variation, EV, as the method to measure the welfare effect. We demonstrate how to derive the equation to calculate EV by starting with a Marschallian demand function.

Background: Today, the tourism sector is one of the economically fastest growing sectors in the world. Volunteer travel is a type of service that is gaining in popularity and a number of tour operators organize these trips. Few aid agencies engaged in volunteer activities and therefore the interest in volunteer travel is caught by tour operators. These tourists travel in small groups and interact with locals. Today fifty million children in Africa are orphaned and Africans struggling with the care of these children by founding orphanages.Research questions:What does volunteers contribute with during their stay at orpahanges?What view does volunteers and orphanages have on volunteer tourism?Purpose: The purpose of this paper is to examine the positive and the negative effects that volunteer tourism contributes to orphanages.Method: The study is based on a qualitative approach with semi-and unstructured interviews, observations, and email interviews.

In this study it was investigated if the adoption of a new routine for quality control could improve the precision of the dimension measurement obtained by harvesters. Data was collected from three different harvesters. First, a reference data set was collected before the new procedures had been incorporated, and then when the new methodology was implemented another data set was collected by the harvester operators, allowing the two data set to be compered. The results indicated that following the implementation of the new procedures, the reliability and the precision of the measurements has increased. All harvesters included in the study had improved regarding most of the controlled factors such as standard deviation, systematic difference and hit rate within ± 2 cm for length and ± 4 mm for diameter..