Detta examensarbete är genomfört i samarbete med Thorbjörn Birging. Birging arbetar med RFID[1] och är även VD för CombiQ på Science Park i Jönköping. Under lång tid har han velat skapa en produkt som hjälper människor med sömnproblem, depression, ångest och stress. Författarens roll som ingenjörsstudent blev att utveckla hans ide till en färdig produkt. Birging upptäckte efter att ha läst en artikel om sömnproblem att det finns studier som visar att det är enklare att somna med ett svagt ljud i rummet för att andra personer i rummet inte skall störas.

This study aims to map out the degree of mediatization present in the communication between Swedishpublic service journalists and politicians in the 2014 election campaign. In doing so we chose to look at thepresence of media logic in their communication with each other. Specifically, we have used the pre-electioninterviews with the party leaders from Sweden?s two biggest parties. Furthermore, we have chosen to focuson Sveriges Radio, the Swedish public service radio company.Sveriges Radio concists of four different radio channels, of which we have chosen to focus on the channelsP1 and P3, the first having a somewhat more ?serious? profile, focused on producing quality news and otherjournalistic products, while P3 is leaning towards a younger audience and describes its own work as ?soft,humorous and important radio?, mixed with music and other forms of entertainment.

Event marketing has during the last decade become a wide spread marketing method. This is because the marketing clutter has increased heavily during the past years and brands are looking for new ways to reach their target audience. The previously well accepted marketing measurement "satisfaction" has shown tendencies no longer to be sufficient for success in today's competitive marketplace. Therefore, the research has somewhat moved to the measurement "brand love" to explain differences in strategic consumer behavior. That is the background to why this report examines and answers the question if a brand through event marketing can enhance brand love.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

An ethnographic study loosely informed by the theoretical framework of distributed cognition was carried out in order to describe how mariners have adopted the Automatic Identification System (AIS) in their work practice, or"made the technology their own". AIS is a transponder-based identification and communication system that allows ships to automatically identify and track each other. In addition to facilitating the identification and tracking of ships, objectives behind the introduction of AIS are to"simplify informational exchange", and"provide additional information to assist situation awareness". Participant observation and interviews were made at four different ships, as well as at two shore stations. A focus group was also held at a maritime conference.

In modern industrial robots the components in the transmission contain nonlinearities. These nonlinearities need to be to estimated either for better control or to use the parameters for diagnosis of the system. There is a lot of work done within system identification and mainly within the field of iterative parameter estimation.This thesis considers recursive grey-box identification for a nonlinear model of the transmission in an industrial robot. The nonlinearities that are identified are friction, spring stiffnes, hysteresis and backlash. These nonlinearities are a part of the models that are presented in this thesis.

This thesis deals with the field of warehouse management, focusing on frequency control of stock. The purpose of the thesis is to reduce the warehouse staff mileage by placing an article based on its number of picks, i.e. how frequently it gets picked. In order to achieve relevant results the following four questions have been answered in the thesis: How should the articles be placed with regard to the picking frequency?Which factors, if any, needs to be addressed beyond the picking frequency when articles are placed based on frequency?Can the present picking system be improved?Is frequency placement with regard to the picking frequency profitable to implement for the company?The thesis is based on literature studies and on the data that has been collected from the company?s business system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The earmould acoustics affect the amplification that the hearing aid is programmed to give to its user. It is therefore important that the choices made for the earmould are correctly done. One choice is regarding the shape of the soundbore that affects the frequency response of the hearing aid above a certain cut-off frequency. The purpose of this project was to measure the frequency response when altering the shape of the soundbore in the earmould. Additionally, the aim was to examine how the frequency response is affected when the shape of the soundbore is not set or is not possible to set in the software when programming the hearing aid.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

Automatic milking systems (AMS) provide the opportunity for less manual labour and an increased milking frequency. But in order to reach an optimal milking frequency a well-functioning cow traffic is crucial. There are many factors affecting cow traffic but one factor that has not been studied thoroughly yet is the effect of different light intensities during the night, 22.00 h to 05.00 h. Therefore the aim of this study was to determine the effect of different light intensities during the night on number of selection gate passages (GP), milking frequency and milk yield. The study was conducted as a Latin square were three light intensities were applied: LOW (11 ± 3 lux), INT (33 ± 1 lux) and HIGH (74 ± 6 lux), in three different herds.