This degree project handles acoustic measurements of the heat pump EcoAir 107, made by Enertech CTC AB. The sound from the three sound sources of the heat pump, fan, compressor and four way valve, have been measured to find out how they affect the total sound level of the product.Measures to attenuate the sound level have been developed and tested. By comparing these with the sound of the heat pump, in its original state, we have found out the measures which have best effects.The best attenuating measures came to be: taped openings and holes around the compressor space, isolating the top and the bottom of the whole construction, support of the fan bottom part and shielding of the sound source with a screen at a distance of 110 mmThese measures have been tested together and an average attenuation of the total sound level with 3,9 dB have been accomplished. In the front of the fan where the continuous sound is the strongest, the attenuation was 4,7 dB.This project is meant to be used as a guide by Enertech CTC AB:s during their future developing process..

When creating a good lighting design it is crucial to know how different types of lamps work. Knowing what kind of light they emit and in which situations they work well is also very important. In this master thesis I present different types of lamps and give an account of how light is spread through the different shapes of luminaires, reflectors, filters and so on. I write about how our eyes register radiation and connections between lighting and how it makes us experience space. Furthermore I deal with the effect of artificial light on living organisms and the environment. After the theoretical studies I deal with the places I have visited to study how different lamps and luminaires work and look like in existing lighting designs. These visits have also been inspirational to my lighting proposal for Bokenäs. Bokenäs is Volvo?s resort and conference center which is situated on the Swedish west coast.

Since prehistoric time man has used wood to build their environment. The material?s availabilitycombined with its good mechanical properties has often made it the material of choice. Like allmaterials exposed to natures degradative processes the properties of wood decreases over time.Rot, UV radiation and attacks by insects and pests damage wood if not protected. Since we wantwhat we build to consist, optimizing our building materials durability is of great interest.Techniques and methods for increasing the endurance of wood have been developed in severaldifferent places and for a long time.

Bakgrund: Övervikt och fetma är en global epidemi. Fetma kan orsakas av arv, miljö och beteendemässiga faktorer. Övervikt kanleda till flera följdsjukdomar. Viktminskning kan ge ökad livskvalité pch psykiskt välbefinnande. Ur ett hälsoekonomiskt perspektiv är det av vikt att det hälsofrämjande arbetet startar tidigt i barndomen.

The purpose of this study is to compare the energy related and environmental consequences of implementing optical sorting as a means of waste collection with those of reducing food waste. In addition to studying the possibility of implementing optical sorting in downtown Stockholm, the yielded amounts of energy from waste collection and reduced wastage will be calculated. This is done by way of literature reviews and interviews. The amount of energy that can be generated through optical sorting and biogas production via anaerobic digestion in downtown Stockholm is 29-44 TJ/year, compared to 118 TJ/year saved by completely eliminating food waste. The generated biogas can replace fossil fuels, but the required food waste contributes to increased greenhouse gas emissions as well as reduced bio diversity and eutrophication during the wasted food?s lifecycle.

Ett lågtröskelboende vänder sig till individer med missbruks- och boendeproblematik där intentionen är att erbjuda individen stöd i dennes alkoholproblematik samt en trygghet i boendet utan att ställa krav på nykterhet. Studiens syfte var att undersöka fenomenet: upplevelsen av att bo på ett lågtröskelboende utifrån ett brukarperspektiv, samt vad flytten till lågtröskelboendet har inneburit för de boendes livskvalitet. I analysen användes ett fenomenologiskt perspektiv med livsvärldsteorin som utgångspunkt. Resultatet visar studiens fenomen som existentiell samhörighet i alkoholmissbruk. Den delade alkohol- och boendeproblematiken gör att de boende upplever sig som jämlika med varandra, vilket också skapar en känsla av gemenskap och tillhörighet.

The purpose of this thesis was to examine how locally produced bioenergy may contribute to meet the climate target year 2050 in the municipality of Uppsala. The goal of reduced GHG-emissions from current 6,8 ton CO2-equivalents to 0,5 ton CO2-equivalents per capita and year, year 2050 is based on avoiding harmful penalties of an increased level of GHG in the atmosphere. By estimating available biomass in the county together with examining future technologies and emission factors for the substrates used, four possible future scenarios has been developed focusing either on electricity generation or production of biofuels. GHG-emissions of year 2050 have been calculated using the software LEAP. The conclusion is that bioenergy, depending on how it is integrated in the energy system, may reduce greenhouse gas emissions between 0.6 ton CO2-equivalents and 1.4 ton CO2-equivalents per capita or 12% to 25% compared to 5.5 ton CO2-equivalents in the reference scenario 2050. The greatest reduction is obtained if biofuels are produced in combination with energy efficient heat requirements in buildings..

Physical activity is required for a good health and science shows a clear connection between exercise and a lower risk for disease. Still, the physical activity among the population is far from good. It is the individuals own responsibility to exercise, but the society also has a responsibility to give opportunities to exercise for the population. The aim with the study was to investigate what motivated the group of physical active people to use the Central hospital in Kristianstad?s health program.

The purpose of this bachelor´s report is to expand the knowledge about heat supply of a small house in Malmö. The heat supply will be provided from solar panels in combination to two accumulator tanks which will storage the up heated water and a pellet boiler.The technique used here is warmth storage in water over seasons, which will provide the total need of heating for the house. Accumulator tanks in combination to solar panels gets more and more common in Sweden but this far it´s unusual to use it for storage over seasons. This report will highlight many of the difficulties associated whit heat storage and give information about a system's possible design and function.The design of this system is decided early on. An accumulator tank is placed 2 meters down in the earth on the backside of the house.

Fusarium graminearum causes reduction in both yield and quality in cereal grain worldwide. One of the diseases it can cause is Fusarium Head Blight (FHB). Both sexually and asexually produced spores can infect living plants. Asexual conidia are produced in the mycelium while sexual ascospores form in asci in perithecia on debris. In biological control, living organsims are used to control pests and diseases.

A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.

During the 1990?s a large number of building projects were revealed where lack of moistsafety precautions during the construction process had led to extensive moisture damage. Alsoresent implemented studies have shown that the problems with moisture damages have ratherincreased than decreased during the past few years. Moist is considered to be one of the mainfactors to cause unhealth due to deficiencies in the indoor-environment and does also causeunnecessary expenses and a reduction of the confidence in the construction industry.In this Bachelor of Science thesis three projects have been reviewed to examine how moistsafetyhas been observed during the construction process. Main focus has been to identify thebuilding components that are the most exposed to moist, and to examine how they have beentaken into account during the period of design and construction.

Climate change is expected to lead to increased rainfall and higher temperatures, among other things. This will have a major impact on our cities. Floods can lead to property damage as well as damages to human and animal health. Higher temperatures will increase the frequency of heat-related health risks and premature deaths. The consequences of climate change will be particularly large in our cities because of the city's morphology with a high amount of paved surfaces and buildings that affect the natural processes in areas such as drainage and absorption of solar radiation.

In the Western world the interest in science in schools is steadily declining. Focusing on interest is important to encourage students to lifelong learning which is a written purpose of the Swedish curriculum. This literature study examines if biology education outside in nature could be a part of the solution for this problem and the question of issue is how can education outdoor enhance students? interest for biology and what other aspects does this effect simultaneously? The method of block search was selected for addressing this question, utilizing the ERIC and ERC databases. The results show that situational interest increased with outside education due to aspects such as: novelty, hands-on, knowledge acquisition and social interaction.

New high strength steels require improved cold rolling techniques. The aim of this degree project was to develop a new and money saving cold rolling technique to manufacture steel strip for saw blades. The work is based on earlier rolling experiments made with a high carbon steel grade at LuCoil Steel AB. The work also focused on the mill requirements to cold roll high strength steels. The results show that LuCoil?s existing cold rolling mill was actually designed for rolling low carbon steel.