Sök:

Sökresultat:

3062 Uppsatser om Radar sensor systems - Sida 30 av 205

Framtidens driftcentral : En analys av den framtida driften av ett svenskt elna?t

Active work to increase the efficiency of energy use is taking place in Sweden and throughout all of Europe. Electricity is an important part in our society?s energy system which means that the electrical grid operators and associated therewith has a central role in this work. Monitoring and controlling the electrical grids are managed from the distribution system operator?s DC, dispatch center.The aim of this report is to examine how the operations in a typical DC on the Swedish electricity distribution network will look like in five to ten years.

Personlighetsskillnader mellan gymnasielärare och blivande gymnasielärare : Differences in personality between high school teachers and future high school teachers

The climate issue is a significant question, and the problem is mainly caused by human activities. Everyone can help to counteract the enhanced Greenhouse effect by reducing the amounts of energy they use and by not consuming more products then they need.Schools are some of societies many consumers and therefore contribute to the Greenhouse effect. The School also has an important task; to teach and disseminate knowledge and information about the climate and the environment. According to the Swedish National Agency for Education, Skolverket, must all schools regularly consider the environment and sustainable development throughout the entire education process. Unfortunately, this is not the case for many schools in Sweden today.One of many tools that can be used to coordinate environmental work and initiatives, and also to make it more efficient, is environmental management systems.

Ström- och temperaturkontroll

Storing kinetic energy in a flywheel allows for more efficient driving of electricvehicles. Research in this area is in progress at Uppsala University, where a flywheelwith magnetic bearings encased in a vacuum chamber is being constructed. To makethis possible methods for measuring the current through the electromagnets in thebearings and temperatures in the flywheel need to be developed. This has been thepurpose of this report. The current measurement resulted in a resistive method, andthe implementation of eight measurement circuits in the system.

Belastningar i bettet och dess korrelation till hästens rörelsemönster vid körning på rakt spår :

The use of a bit in the mouth of a horse is being increasingly questioned with respect to its actual function, and is sometimes judged an obsolete instrument of control with potential to injure the horse. The objective of the research presented herein was twofold; firstly, to investigate the actual pressure load in the mouth of the horse with regard to oral health issues, and, secondly, to investigate whether this could be a viable method to objectively measure strength exerted by a rider/driver to the mouth of the horse especially with regard to training regimes. From the results, it is evident that these newly developed sensors have a future in equine research, although they are still under development. They can be useful both as a pedagogic teaching instrument, providing instructor and pupil with instantaneous, objective feedback on the contact between hand and mouth, as well as an aid in measuring pressure loads from our common bits. .

Mekaniserad spaning i dag och i framtiden

Den mekaniserade bataljonens främsta sensor att samla in underlag till underrättelsesektionen är spaningsplutonen. Spaningsplutonen på mekbataljon har bytt organisation över åren och gått från att vara ett terrängbils eller bandvagnsburet förband till sin nuvarande form med stridsfordon 90. Men har förbandet använts på rätt sätt sedan det tillfördes stridsfordon? Hur bör framtidens chefer nyttja plutonen för att maximera effekten?Arbetet baseras på de reglementen som finns idag samt intervjuer med personal tillhörande spaningsplutonerna och bataljonsstaber. Utöver det kommer en jämförelse med US Army Armored Cavalry göras..

OPAC i moderna kläder ? en kvalitativ studie om olika generationers informationssökningsvanor och förväntningar på informationsåtervinningssystem

The purpose of this bachelor thesis is to find out how information seeking habits and experiences of people in different generations affects their expectations on information retrieval systems like OPAC. Two OPACs are used, one web-OPAC and one mobile-OPAC. The following questions are asked: how can theories about information seeking behaviors explain why and in which way one seeks information? In which way does information seeking behaviors and habits affect the experience of OPAC? Which differences and/or similarities can be found between the web-OPAC and the mobile-OPAC? How does generational aspects affect experiences and preferences in an information seeking context? The theoretical framework of the thesis is information retrieval with several models about information-seeking/searching needs and behaviors. The empirical data contains interviews with nine people in different generations and protocols about two different OPACs.

Adaptiv katalysatormodell för reglering

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

Realtidsoperativsystem på mätinstrument.

Emwiro Vibe is a complete system for seismic measurements. The functionality of the system was before the completion of this project handled using a software contruction based on a state machine. Emwitech, the company developing Emwiro Vibe, expressed a desire to replace this solution with a real-time operating system (RTOS). The project consisted of two parts. Firstly the existing software was studied, available RTOSes was evaluated, and the RTOS most suitable for the application was selected.

Realtidsoperativsystem på mätinstrument

Emwiro Vibe is a complete system for seismic measurements. The functionality of the system was before the completion of this project handled using a software contruction based on a state machine. Emwitech, the company developing Emwiro Vibe, expressed a desire to replace this solution with a real-time operating system (RTOS). The project consisted of two parts. Firstly the existing software was studied, available RTOSes was evaluated, and the RTOS most suitable for the application was selected.

Alternativa produktionsmetoder vid anläggningsarbeten Kringgjutning av el- och telekabelkanalisation

I dagens samhälle blir det allt mer intressant att spara energi, dels med tanke på miljön och dels föratt minska på utgifterna. Denna energi ska sparas på ett sådant sätt att effekten för användarna blirså liten som möjligt.I denna rapport beskrivs hur ett reglersystem kan byggas för att minska energiförbrukningen hosväxthus genom att reglera belysningen på ett effektivt sätt. Systemet är helt automatiskt vilket göratt användarna inte behöver tänka på styrningen av lamporna alls när väl systemet är uppsatt ochkonfigurerat.För att styra lamporna på ett bra sätt mäts det inkommande ljuset med en PAR-sensor. Lampornatänds och släcks därefter beroende på ljusmängden och även på hur varmt, eller kallt, det är iväxthusen.Styrningen av belysningen sker med en mikrokontroller från Microchip, en PIC18F4620 som ärprogrammerad i C18. Kringkomponenter som portexpasioner, klocka och reläer användes också föratt bygga ett bra reglersystem.Resultatet är att det är möjligt att bygga ett reglersystem med begränsad budget som styr lampornapå ett effektivt sätt.

Konceptstudie av Waste Heat Recovery System på Tunga Fordon

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

Effekter av tidiga reflektioner vid musikreproduktion

In this project the focus has been on the system for recombination at Oskarshamn 2. The recombining systems have on several occasions switched paths due to low pressure before the last ejector that?s feeding the recombiner. Of the mentioned reason, events and several measuring points have been analyzed in this report since the installation of the recombining systems.In order to prove theories and demonstrate what may be the cause of this problem, we used heat balance calculations by the program Probera. Using the program, we can demonstrate that the catalytic process does not reach the desired temperature with the amount of combustible substance.

Aktivitet som sjukdomsmarkör på kalvar i gruppsystem :

Since long, Sweden has had exceptionally low calf mortality compared to most other countries. The tradition has been to keep calves in individual pens. With increasing number of cows per herd there is now a larger interest in more efficient and economical group systems for housing calves. However it has been noticed that bigger herds have more health problems and higher calf mortality than smaller herds. The early signs of disease are harder to detect when the animals are not fed manually.

Får vårdpersonalen bästa tänkbara IT-stöd? : Kartläggning och analys av informationsflödet mellan EPJ systemförvaltning och vårdpersonal

In health care today at Uppsala County Council the daily work involves spending time at the computer. IT-systems were implemented to support and aid the care givers in their work. Around these systems there is a support organization to support the users in using the system. The aim of this thesis is to investigate this organization in terms of how well it works and how successful it is in helping the users. This has been done by investigating the flow of information trough the organization and by focusing at the role of IT-coordinators with responsibility for support, process development, education and statistics.

Corporate Social Responsibility - A case study about how to improve a company?s CSR work

Background: Since the start of the twenty-first century it has become very important for companies to act in a responsible manner, in guides of CSR. The idea is that companies have more responsibilities than to achieve a higher profit for their shareholders. They should also care about the society and act in a responsible way.Problem discussion: Problems concerning CSR are that the internal part of the sustainability work has not encountered the same level as the external part of the sustainability work. Companies are today struggling with implementing CSR into their business strategies.Research questions:1. What does a company has to consider when working with CSR? 2. How can management control systems help the implementation of CSR into the organisation?Purpose: The purpose of this thesis is to examine what a company has to consider when working with CSR and how management control systems can help the implementation of CSR into the organisation.

<- Föregående sida 30 Nästa sida ->