Sökresultat:
9369 Uppsatser om Quality-driven development - Sida 58 av 625
En ledarutvecklingskurs utvärderas
Purpose: To evaluate the management development course held at FöreningsSparbanken in Ronneby during 2000. The evaluation aims to map and describe what effects the course has had on the participants. We will assess to what degree the effects meets the objectives of the course set by the manager of the bank (future management recruitment, leadership, change catalyst, aligning the strive towards a shared organisational objective). Above mentioned also implies that the organisation should be influenced in some regards. Conclusion: Our conclusion is that all of the participants have as a result of the course increased their emotional intelligence in varying levels.
Förebygga läs- och skrivsvårigheter genom språkstimulerande arbete i förskolan
The purpose of my examination is contributing with knowledge about the relation between language- stimulation in preschool and read- and writes developing and teachers thought about that. In order to meet the purpose I read literature that deals with my matter and is based previous research. I also made qualitative interviews with three elementary school teachers and three preschool teachers who work within preschools that concentrate on development of language in a town in the middle of Sweden. In this way I find out about their thoughts about what they think is important to work with about language in preschool and how the preschool teachers can work with the development of language to make it easier for the children in their read- and writes developing. The result shows that it is important to work with children?s development of language in preschool.
Testsystem för utredning av integrerad styrning för RC-helikopter
AbstractThis report is about the creation of a test system for development of a control system for a off the shelf RC-helicopter, which can be bought for about two thousand SEK. The test system consists of both electronics for controlling the helicopter and mechanical constrainer. The constrainer is used for mounting the helicopter so that it won´t crash.A circuit board including processor and sensors was manufactured. This was used for doing test of the different control algorithms. In this way were we able to analyze the quality of the sensors chosen, and what other sensors that could contribute to the control of the system.Basic helicopter control have been studied and presented in the report.
Vad kännetecknar en bra respektive mindre bra lärare? : En studie om gymnasieelevers syn på ledarskapskompetens i klassrummet.
The purpose of this project is to examine students' pespectives on quality in teaching. The characteristics that are described to denote a 'good' and 'less good' teachers are linked to ideas about types of corresponding leadership styles in the classroom. The report is based on surveys of students in Upplands-Bro high school outside Stockholm. In order to get better insight and further knowledge of the subject, the student accounts have been related to current discussions in the literature about good leadership and teaching quality.Following the methodology of grounded theory a pilot study was constructed to design the research instruments. In the pilot study I collected students' perceptions on quality-related categories in teaching and leadership which then formed a bases for a survey which was distributed to a larger student sample. The survey includes questions that relate to the middle order, which is based on three criteria that make up the characteristics of a 'good'/ 'less good' teacher and the leadership style that suits students descriptions of good teacher characteristics.The results of the study show that a good teacher should have subject knowledge, be good at writing and illustrating the curriculum on the whiteboard and explain and clarify their instruction through good communication.
Styrelsearbete över tid - En studie av företagsutvecklingens påverkan på styrelsearbetet i ett onoterat svenskt familjeföretag
In this study we have focused on how board work is affected by companies growth and development. This research has been conducted through a case study of Teleopti AB, a private Swedish family-owned company, together with theory and literature studies. We have studied the development of Teleopti since its founding in 1992 until today and what impact this company's development has had on Teleopti's board work and composition during the same period. Through the study we came to the conclusion that Teleopti's board work has gone from being supportive and advisory to more professional with a higher degree of board involvement. This change has been caused by the reduced information asymmetries, the increased need for board's expertise, the new board dynamics and the CEO change caused by the company's growth..
Utvärdering av grafisk utvecklingsmiljö för programmering av signalprocessor
This work aims to evaluate the possibility of using a graphical programming language to develop software for a digital signal processor. A fixed-point digital signal processor called Blackfin BF-537 is used for this. Instead of using conventional programming languages, like C or assembler, for software development the possibilities to use a graphical environment to fill the same purpose are examined. The development environment primarily used is NI LabVIEW, but also the use of Mathworks Matlab Simulink is investigated. A variety of programs consisting of various signal processing operations and utilities are developed using these development environments.
Potentiella armeringsfel inom byggproduktionen : En generell studie
Reinforcement is of great importance to fulfill the dimensioned strength of a concrete construction. This requires that the work needs to be carried out with adequate results that neither endangers the workers or the safety of the construction. Progressive development of the planning phase, construction documents, and construction methods is in constant need since the technology constantly evolves.In order for contractors to be able to get acceptances from their quotations requires that they have to increase their working pace in order to be able to leave a quotation with a lower price than the competition.Due to the increasing pace the different parts involved in the construction process is subjected to time pressure. The design stage, construction documents, work preparation and the execution are all affected when everything has to be finished quickly. To avoid problems, it is required that all parts are able to deliver good quality solutions and results under the influences of time pressure, which is not always easy.
Not Quite på två ben : En studie av synen på kulturkooperativet Not Quite's roll för lokal och regional utveckling
For the past decades, culture has been given a role as a factor for local and regional development. But what is meant by development and in what ways culture can be of importance in this aspect can be unclear. This thesis examines the perception of the role for local and regional development of one specific cultural place and network ? the cultural cooperative Not Quite in Fengersfors, Sweden. I study the way the role as developer is expressed and interpreted in the discourse of the cultural workers who are members of the network and in the discourse of public cultural policy in the region Västra Götaland and in Åmål municipality.
LUT ? En metod för systemutveckling med lean software development
Traditionell systemutveckling präglas ofta av långa utvecklingsprocesser och en oförmåga attmöta förändrade behov från kunden. Problematik med buggar i mjukvaran och förskjutnadeadlines uppstår kontinuerligt och leder till högre kostnader för företag.För att komma till rätta med dessa problem behövs en systemutvecklingsprocess som belyserproblem direkt när de uppstår och därmed tvingar de inblandade till reflektion över processensom skapar problemen vilket belyser de verkliga bakomliggande orsakerna. Låg kvalitet påmjukvara är ofta ett symptom på djupare organisatoriska problemEtt synsätt som syftar till att möta dessa problem är lean software development. Synsättet harinspirerats av lean production som är en beskrivning av The Toyota Production system vilketi sin tur är det arbetssätt som har tillämpats av Toyota under flera decennier i den traditionellatillverkningen.Mary och Tom Poppendieck har beskrivit sju principer och 22 tankeverktyg som kananvändas för att skapa en metod för lean software development. Studien visar vilka styrkoroch problem som lean software development och lean production beskriver generellt samtvilka styrkor och problem som finns avseende beskrivning av Poppendieck's principer ochtankeverktyg i synnerhet.
Att köpa i Kina: En studie om hur och varför svenska företag fördjupar sina inköp i Kina
China is one of the fastest growing markets of today and attracts billions of dollars in foreign direct investments. Swedish companies have not been late to follow and operate on the Chinese market driven by opportunities in sales, production, and sourcing. However, there has been limited research made on how and why Swedish companies extend their sourcing efforts in China. By combining research within the internationalization of export activities, concepts from global sourcing, and gathered empirical data from leading Swedish companies operating in China, the thesis develops a framework for analyzing the internationalization process of sourcing in China..
Logicat
I vår produktion har vi tagit fram ett system för order- och lagerhantering, med vikt på realtidsuppdateringar, åt en extern mottagare där infrastrukturen inte hängt med i företagets utveckling. Vi valde detta projekt i syfte att bredda våra kunskaper inom både programmering och projekthantering. Denna slutreflektion tar upp den förundersökning vi gjorde för att kunna besluta om vilka verktyg vi använde i utvecklingen, den tar även upp vårt sätt att hantera och planera projektet. Under projektet har vi arbetat med en egenutformad arbetsprocess vilken även beskrivs här. --- Our production has been to design a system for ordering and supply management with emphasis on realtime updates to an external recipient, where the infrastructure has not kept pace with the development of the company.
Distribution och försäljning av kvalitetsfuru : en fallstudie
The purpose of this study is to analyse how a distribution and sale-network for quality softwood lumber should be designed to fit sawmilling companies? business concepts, and at the same time satisfy customer needs regarding delivery time and quality aspects. This thesis work is a case study based on a sawmilling and retail company in Sweden.
AB Karl Hedin is a private owned sawmilling company with 500 employees. The company?s turnover is 1500 million SEK, it includes 4 sawmills, 16 builders merchants stores and a packaging company.
Folk i allmänhet har taskig smak En studie av vanliga läsares kvalitetsvärdering av skönlitteratur
The aim of this study is to investigate ordinary readers' evaluation of quality in literature. The main issue is which criteria ordinary grown-up readers use when they are defining their likes and dislikes in literature. The analysis is based upon qualitative interviews with six readers, two men and four women, between 21 and 59 years of age. The study is hermeneutic. Since theoretical works concerning evaluation of literature among ordinary readers are sparse, the philosopher of arts and religion Hugo A.
Barns språkutveckling : Validering av SECDI-III mot CCC-2
Språksvårigheter kan leda till sociala problem eller vara en indikation på neuropsykologiska problem. MacArthur-Bates Communicative Development Inventories (MB-CDI) och Children´s Communication Checklist (CCC) är instrument som används för att uppmärksamma eventuella brister i kommunikations- och språkutveckling. Swedish Early Communactive Development Inventories (SECDI) är svenska motsvarigheten till MB-CDI. Föreliggande studies syfte var att validera den nya svenska versionen av SECDI för barn 3-5 år gamla (SECDI-III) mot de tio skalorna i CCC-2. 36 föräldrar deltog i studien.
Vad är ?rätt? gjutkvalitet? Hur uppnås det?
Ever since ABB has begun diecasting their rotors instead of permanent mold casting it,variation in the quality of the cast has arisen. Diecasting is performed in three differentmachines, M1, M2, M3 with 400, 660 respectively 800 tons of die locking pressures.The aim of this thesis is to answer the following questions:What is the ?right? cast quality? How is the right quality achieved?For sizes 160-180 solutions will be proposed that consider eccentricity between thelaminate and the short circuit ring as well as elimination of the thin Al film that appearson the outer periphery of the rotors.Through considering the statistic material the most often diverging rotor type has beenidentified and one of the actual rotors has been sent to a laboratory to be analyzed inorder to establish the current defects. The result of the analysis shows that there areplenty of gas- and oxide-porosity.It has been proved that every time the dies temperature decreased below 120°C thecontent of gas porosity increased. It is due to rapid solidification of metal that flowsthrough the ?cold? laminate.It has confirmed that enhanced porosity in squirrel cage causes high impedance in therotors.