The print- and mailroom at Gefle Dagblad (GD-tyck) is handling an increasing amount of commercial jobsalong with the newspaper production. Investments have above all been done in the mailroom to be able tooffer commercial costumers a higher degree of finishing and there are plans to expand further in the commercialmarket. GD-tryck is of the opinion that they need to secure the quality of their production to be ableto do such expansion, which is the reason why a quality system of some kind may be appropriate. Howeverthere are no plans to certify such a quality system according to ISO 9001:2000.In this exam report the present methods of working have been analysed from a quality perspective.Suggestions on how GD-tryck should be working with quality development is presented in the fields whereshortage of quality has been discovered. The suggestions taken together do not form a quality system butcan be looked at as ideas of approach to quality fields that have to be developed if a working quality systemshall be accomplished.Many of the quality fields that have been discussed do not have anything to do with technical qualitydirectly but are in some degree requirements for a working quality system.

När en ny produkt lanseras på marknaden uppkommer det med stor sannolikhet brister som intetidigare upptäckts. Syftet med denna studie är att skapa en arbetsmodell för hur medelstora företagska hantera kvalitetsavvikelser som uppkommer inom produktion. För att skapa en realistisk modellför hur dessa kvalitetsavvikelser skall hanteras, baseras detta examensarbete på en fallstudie utfördpå ett tillverkande företag vid namn AQ ParkoPrint AB som är beläget i Gävle.Följande forskningsfrågor har besvarats för att understödja det huvudsakliga syftet:? Vilka kvalitetsavvikelser kan uppkomma inom medelstora företag?? Hur kan dessa kvalitetsavvikelser hanteras samt om möjligt reduceras?Metoderna som använts i studien är intervjuer och observationer. Fem intervjuer och tvåobservationer utfördes på AQ ParkoPrint AB.

This thesis describes the new construction of a small house and it includes studies of three heating systems: geothermal heating, district heating and pellet. The purpose of this thesis is to project a small house which can manage Building Regulations, BBR conditions and then examine three possible heating systems for the small house. This thesis is a literature study which gives an understanding of the heating systems technical structure, properties and costs. An empirical study completes the literature study by giving a deeper understanding of district heating costs and pellet costs. The empirical study contains two interviews, one of which was conducted in a district heating corporation and the other interview was conducted in a pellet corporation.

The purpose of this master thesis is to present a model that illuminates the important factors when deriving technical information from market data within a company. For companies to be able to become and stay competitive in the market, product quality is an important factor. Whilst good product quality leads to customer satisfaction and loyalty, lack of quality brings costs in service and replacements. To improve product quality, the developers need information and knowledge about what quality issues affect existing products. Most companies gather data from market about known issues, but in order eliminate known quality issues in new products; this data has to be transformed into information and knowledge.

Quality Assurance in Service Procurement --- Total Quality and Total Quality Management refer to popular management philosophies in organizations these days. The purchasing department has an important part in the strive for organizational quality as several studies show corporate spend is significant and increasing. In this master thesis I study the actions companies take to ensure quality in service procurement. I argue that managing quality when sourcing services is particularly tricky, because of the special characteristics that belong to services. The purpose of the study is to examine whether different actions are taken to ensure the quality of different kinds of services.

The care for the elderly in the municipalities has recently seen the need for a formalized system for quality assurance. Under increasing demands for monetary efficiency while bound by law to retain acceptable standards in health care, there is need for efficient and at the same time quality-assured management. The municipalities often solve this puzzle by introducing systems and standards influenced by theory-clusters such as NPM (New Public Management), TQM (Total Quality Management) or other quality management theories.This essay focuses on how the public administration in the municipalities defines quality and designs and implements system for formalized quality assurance. Our basic view of organizations is institutionalist and our theoretical framework includes theories about quality, NPM and TQM..

Systematic quality work in preschool ? How preschool teachers thinking and working with systematic quality work The purpose of this study was to investigate how Swedish preschool teachers thinking and working with systematic quality work. All Swedish preschools are required to work systematically with quality. This involves several steps that follow each other in a specific order. It includes following up, documenting and evaluating preschool activities.

The purpose of this study is to describe and analyze how auditors are affected by quality controls and if audit practice changes because of quality controls. To fulfill the purpose of this study there has been interviews made with five auditors. The conclusion by this study is that the interviewed auditors work practices are affected by quality controls and that the extent and effect depends on the auditor and the office that the auditor works in. The auditors who worked as quality reviewers at the agencies where they are employed at, we felt that they were more secured in the response towards quality controls. This may be because they are quality reviewers themselves and they know what the quality control requires and what must be met to be approved.

Sigill Quality Systems has been certifying beef since the autumn of 2006 using the brand name label Swedish Sigill. IP Sigill (the certifying system for integrated production) encompasses the values: animal ethics, food safety, free range and environmental concerns. Product quality is not yet one of these values, and there is a variation in the quality of Swedish beef. Swedish Sigill wanted to investigate the factors that influence product quality, review which of the present regulations that have an influence on product quality and formulate new regulations with the purpose of enhancing the product quality (sensorial, technological and nutritional quality). A survey of quality parameters and factors that influence product quality was done in order to establish a scientific foundation to work from.

AbstractThe purpose with this essay is to get knowledge about the consequences that speech-defects bring for children in pre-school ages. I got interested in this matter when I, during my teaching practice, got in touch with children carrying this specific disorder. I chose to apply qualitative interview as a method to investigate this and as a starting-point I used these aspects: How does speech-defects affect learning, understanding, friendship relations, and development in general?I interviewed three pre-school teachers in two different schools. One school in a smaller district and the other one in a middle-sized town, in the middle of Sweden.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

One of the most distinguishing features for companies today is that they must have a close collaboration and keep up a good relationship with their suppliers. This is important for the companies chance of survival and for them to compete in their markets. This essay will discuss the subject of Scania?s long-term collaboration with their suppliers. The purpose of the essay in this case study is to analyze if a long-term cooperation with a supplier is of essence upon renegotiations of continued collaboration.

This thesis describes the new construction of a small house and it includes studies of three heating systems: geothermal heating, district heating and pellet. The purpose of this thesis is to project a small house which can manage Building Regulations, BBR conditions and then examine three possible heating systems for the small house. This thesis is a literature study which gives an understanding of the heating systems technical structure, properties and costs. An empirical study completes the literature study by giving a deeper understanding of district heating costs and pellet costs. The empirical study contains two interviews, one of which was conducted in a district heating corporation and the other interview was conducted in a pellet corporation.

A study has been conducted on how organizations in Sweden administer costs of facilities management services internally. There are three main theoretical methods for administering costs. In the first method, costs are maintained on a central level; in the second method, costs are allocated and in the third method, internal transfer pricing is used. The aim of the study is to identify which methods are applied in practice, to evaluate whether the methods fulfill their intended purposes and to study the relationship between the methods used and the cost level of facilites management services. In practice, a large diversity of methods are used for facilities management costs.

Costs of maintenance on agriculture machines is something that many farmers has a low knowledge of, it can depend on low interest or that the farmer don?t have enough time. To make it easier for the farmers they can use many computer programs which are available on the market. In this program they can calculate their costs of maintaince on their agriculture machines, for example STANK and JTI machine calculation program. Most of this program is using Svensson (1987) costs model whish was made in Sweden in the middle of 80 decade in a large study.