The aim of this report is to investigate how the work handling at the department for arriving goods at EFG in Tranås is working, as well as how it could be improved and made more effective. EFG is a corporation who process and sell office furniture. The company is working with a project concerning delivery precision, the subject is therefore particularly interesting from the perspective of delivery accuracy. The number of orders has increased notably during the fall of 2005 and the spring of 2006. This has led to new demands at the department for arriving goods and the topic is as a result of that important also from this point of view.Interviews and investigations have been conducted at location since no written material earlier has been made in the topic.

Heartwood has always been a desirable part of the tree, due to it?s superior decay qualities com-pared to the sapwood. How the formation of heartwood works has been known for a long time, but which factors that initiates and stimulates the production are poorly understood. This case study presents the results of a study in which silvicultural treatments and site properties had a key position as factors to the formation of heartwood. According to the hypothesis the amount of sapwood is directly controlled by the size of the crown.

Documentation in electronic journals is perceived as time consuming and sometimes technically difficult to handle, but also leads to an improved quality of care. Objective: The purpose of this study was to investigate nurses' perceptions of documentation with a focus on timing, technique and quality of care and whether any differences in these perceptions were dependent on age. Method: Quantitative descriptive cross-sectional study in the survey form, 28 nurses at a university hospital in central Sweden participated in the study. Regression analysis was performed with Spearman's rank correlation coefficient. Results: Electronic documentation takes 30 to 60 minutes for most nurses and half of them considered it a reasonable time.

The aim of this report is to develop an improved basis for calculation of common costs as well as to create a support, showing which steps can be taken for improving the future monitoring at NCC Hus in Karlstad.The objective of this report is to improve the quality of the process of quoting by verifying current key numbers, production of new key numbers and to identify the problems affecting the monitoring of projects.The objective is also to provide suggestions of actions improving quality assurance at NCC Hus in Karlstad..

Old people's life situation when receiving municipal help and care in theirlast period of life is sparsely investigated from their own perspective. Thepurpose of this study was focused on the thoughts of the aged people andtheir personal experiences on what quality is within the geriatric care. Inthis qualitative study, 10 elderly people aged 75-90 years wereinterviewed from 3 different nursing homes within Solna Municipality.Qualitative interviews, with the emphasis on their present life situationespecially what brought about a good life, were performed. The interviewswere analysed using qualitative content analysis. The implication of theterm ?meaningful existence? is individual and differs from person toperson.

The purpose of this study was to investigate produced laser data from the new national height model's airborne laser scanning in Sweden, what quality it has and whether it can be used for forest management planning. From airborne laser scanning one can obtain information on forest variables such as tree species, height, diameter and basal area. Norra skogsägarna is the principal employer of this project and they wanted know to the quality of the laser data which needs to cope with their standards. If the laser data the quality required it can replace some of the operations performed by field planners. To examine the quality of the produced laser data a control tax assessment has been performed in 30 forest departments. This was done in an objective manner.

Since Sweden joined the European Union all Swedish fruit and vegetables are classified according to EU Quality standards. One important function is the product description and how it can facilitate the trade; for example in better comparing prices and also to guarantee the quality of the product. This quality standards or product descriptions are written as words of an Act and obligatory for all countries that has joined the EU. It?s often a demand from the customers to be certificated according to some of many certificating systems. One example is the common worldwide GLOBAL GAP-certification system created by the organisation EUREP which represents the leading European retail traders.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

AbstractTitle: Accounting firms´ view on the (new law) in joint-stock companiesCourse: Business Administration, Financial Accounting in Corporations and Groups, Ad-vanced Course, 15 ECTSAuthors: Mikaela Uveby, Shadi Nourbehesht, Almira DizdarevicAdvisor: Kent TrosanderProblem: During the last few years, more importance and emphasis has been put on auditors and accounting in general due to a number of company and business scandals on both national and international levels. The United States as well as the EU consid-ered it a necessity to make regulations stricter when it comes to auditing and ac-counts in order to increase the public trust to accounting. At January 1st, 2007, Sweden also changed its law concerning accounting firm challenges. The new law states that as soon as someone of the auditor?s co-workers assists a client with some part of the basic bookkeeping, the main bookkeeping or the drawing-up of the an-nual account, the challenge situation becomes a fact.Purpose: The purpose of the essay is to examine and inquire into how the renewed law con-cerning accounting firm challenges, that was established and put to action at Janu-ary 1st, 2007, has affected accounting firms.Method: The writers have chosen to complete qualitative interviews in order to get a deeper insight to and an understanding of the topic.Conclusion: One year after the renewal of the law, the writers have reached the conclusion of that the new law has not had a great impact on the accounting firms.

AbstractThis bachelor?s thesis at the Department of Production Engineering at the Royal Institute of Technology in Stockholm deals with the subject of automated metrology. The degree of automation of tasks within production has been a growing trend but the measurement of quality has not followed the same trend. The main thesis follows:What incentives are there to automate the measurement of quality in production?What factors are crucial and why are not all metrology automated?The thesis comes along with a number of sub-queries and delimitations.The working method includes both theoretical and empirical studies.

Background: It is required that health care professionals continuously work with patient safety and quality improvements, and the skills of registered nurses are significant in this work. However, quality improvement also requires commitment and knowledge about how to improve health care and ensure patient safety. There is a lack of studies that highlights the importance of supportive functions for this work. Nurses in clinical settings can be utilized as facilitators that make things easier for other health care professionals who are engaged in quality improvement and patient safety. In order to gain understanding about the significance and needs of nurses with a role of facilitator, it is urgent to learn from their experiences of facilitating quality improvement in health care.Aim: The aim was to study nurses? experiences of facilitating quality improvement of nursing care, patient safety and multi-professional collaboration in health care.Method: Semi-structured qualitative interviews were performed with ten registered nurses who had experience of being in the role of facilitators.

In the master thesis the focus of the study has been on the special library of the Goethe-institute in Stockholm. A survey was made among the visitors coming to the library, to find out how they used the library and how they would judge the quality of service. To find out how the needs and the opinions of the users were meet by the library I also made an interview with the staff one librarian and the chief librarian. In the analysis I used the theory about service quality of Christian Grönroos as a framework. The theory distinguishes the service quality into technical resp.

The aim of this paper is to explain and compare non-compliance of two EU-directives, ?the quality of bathing water? and ?the working time directive?. This study answers the questions: Why didn?t Sweden implement the directive on bathing water quality and the working time directive correctly? Are the reasons for non-compliance the same or different in the two cases? The paper is designed as a case study and with an explanatory attempt we explain why the two directives weren?t implemented correctly in Sweden. The theoretical approach is based on both general- and EU-specific implementation theories.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.