
Sökresultat:
10838 Uppsatser om Quality Controls and Supply Chain Management - Sida 27 av 723
Temperature monitoring during transport of test samples
Quality is the main focus in management of all laboratories. Accurate results of the analyses are not only determined by the analytical procedure but also by preanalytical factors. In the total analytical process of clinical specimens, there are many possible preanalytical sources of error. Monetoring of temperature on test samples of the transport boxes is one way to reduce the mistakes in the preanalytical phase.In this study, four laboratories from primary health care were invited to participate. The temperature has been measured on test samples of the transport boxes being delivered to the laboratory.In three cases the temperature remained within the limits, but in the fourth case the temperature varied more than the allowed interval.
Framtidens elnät : Hur elbilar och solceller påverkar på det lokala elnätet
The purpose of the project is to determine the impact of solar cells and electrical vehicles on the future electricity grid and distribution network. Future electricity grids will be affected differently than it does today. Therefore, it is important to determine the impacts so that the current electricity distribution system can be developed and redesign to achieve the future demand. In Sweden, government has changed rules and laws in order to make it easier for private sector to invest in renewable energy sources. Our project focused on the impact of the solar cells and electric vehicles on the low voltage electricity distribution.
Kvalitet och gränssnitt i strategiskt ledarskap
Benchmarking is an established method of working which is often used in order to develop the quality of the organization. However, almost 70% of the organizations with benchmarking fail due to the lack of planning and structuring of the benchmarking exercise. Maintenance sections in the paper and pulp industry are one of those who have decided to conduct benchmarking. Therefore, the purpose of this study is to gain knowledge of how the maintenance sections in the paper and pulp industry deliberately structure and plan to use benchmarking as a driving force for quality development in the maintenance sections.The study is a hermeneutic case study. Telephone interviews and document analysis have been used as data acquisition methods.The results show that there is a lack of both planning and structuring in the benchmarking process, and lack of management commitment for quality improvements within industrial maintenance.
Ändring av befintligt ridhus : Gävle Fältrittklubb
In past decades information technology has changed the conditions of organizations, not at least within the industry. Advanced IT systems have become a fact in order to cope with rapid changes in the market and to effectively manage an organization?s knowledge. When organizations became more flexible and customized expectations from customers and stakeholders also become higher. These expectations and guidelines are documented in a company?s management system, which can be designed differently depending on what standards the company chooses to implement.
Hotells internetnärvaro : En jämförande studie mellan Karlstads kedjehotell och oberoende hotells exponering på Internet.
In today?s society Internet is evolving the tourism industry and it?s the pioneers that use this marketing channel to further their brands that?s that reap the benefits of early adoption. In this essay we research how well two kinds of ownership structures, private ownership and chain ownership, in the hotel market match up against each other in Internet presence and the steps they have taken to encourage guests too book via their websites. We determined that the hotel market in Karlstad was sufficient to study the different kinds of ownership structures as it?s small enough to see the competition between private ownership and chain ownership clearly instead of as normal in more densely populated cities where chain owned hotels dominates the marked due to sheer size. The scientific research consists of two types of methods.
Nationellt varumärkesbyggande : En studie om hur Botswana kan använda sig av nationellt varumärkesbyggande i landets utvecklingsprocess
In this paper I study how the repeal of the Swedish wealth tax (1 of January 2007) has affected people´s labour supply behaviour. This particular issue is relevant because it may help us understand some of the effects of the earnings tax changes that have taken place in Sweden. Accoring to standard economic theory a repealed wealth tax is similar to an income effect for the persons who previously paid the tax. That means that they theoretically will want to consume more leisure, that is decrease their labour supply. The method I am using to test this hypothesis is a difference-in-difference approach where the treatment group consists of persons who previously paid the tax and the control group of comparable persons who did not pay the tax.
ABC-kalylering i grossistföretag -modelldesign och effekter
Background: A large number of companies works as a link between manufacturers and final users. These companies buys and stores goods to be able to deliver when a need comes up later in the chain. The storage could have a negative effect on profitability and therefore places great demands on the management control systems. ABC as a method has been used with some success in manufacturing for over ten years. In wholesale companies the method is not frequently used.
The Effects of Technology-Based Self-Service on Grocery Retail : A Swedish Case
Technology based self-service (TBSS) used in supermarket self-scanning checkouts is a relatively new phenomenon in Sweden. Studies on TBSS as a self- checkout device have been formerly carried out but with focus on the customer perspective. The authors therefore saw a challenge in covering the self-scan checkout concept, from a company perspective. The purpose of this research paper is to investigate, through a management perspective, the changes brought about by implementing an innovative TBSS system in Swedish supermarkets, and its effect on the competitiveness of the company. This is done by presenting and linking the theoretical framework and empirical study in the research.
Valet av hög revisionskvalité : Vilka faktorer beskriver valet?
This paper analyzes the auditor choices for a sample of 300 predominantly small Swedish firms, all located in Umeå. Our hypothesis was based on the complexity of a firm, the need of external financing, leverage, and the need of extra consultance from the auditfirm. Our definition of auditor quality is based on prior studies, and is frequently used by authors in this area. The assumption is based on that the auditor quality increases with the size of the auditfirm and the degree of the auditor. The auditor quality is therefor depending on the choice between an auditor from the group ?Big 5? or not, and the choice of an auditor with an higher degree.
Kvalité och kontroll inom revisionsbranschen : spelar det egentligen någon roll?
Audit is a service of society that takes place in the public interest. To guarantee the quality of auditing a quality control is done with predetermined time intervals. The purpose of this paper is to investigate and analyze the concept quality and the procedure of the quality control and further to tie concepts like trust and ethics to the audit profession. To make the picture complete the paper also provides an insight regarding what deficiencies in quality, in other words failures, means to the audit profession. By performing semi-structured interviews with seven qualified auditors, active on different auditing firms in Skåne, substantial information was collected.
Bygg smartare, inte fortare! : En fallstudie av Lean Thinking inom prefabricerat byggande
Kostnaden för nyproduktion av hus i Sverige har ökat markant under de senaste åren. Byggföretag har svårt att hålla både projektens löptid och kostnader nere, vilket resulterat i ett ökat marknadspris och ett växande missnöje bland slutkunder. De ökade kostnaderna beror enligt forskning på vanligt förekommande slöseri i form av såväl material som arbetskraft. I försöken att eliminera slöseri har många företag anpassat sin verksamhet efter Lean Thinking, ett system som härstammar från den japanska bilindustrin, bestående av verktyg och metoder med huvudsyfte att identifiera och eliminera slöseri. Ur detta har även nya former av byggnation fångat marknadens intresse.
Konsekvenser av oplanerade verksamhetsavbrott orsakat av fel på medicinteknisk utrustning : En studie inom Länssjukhuset i Kalmar med fokus på drift, säkerhet och kvalitet
Title:The issue of unplanned stoppages caused by failure in medical technology equipment ? A study within the hospital of Kalmar with a focus on manage-ment, security and quality Author:Anna Förster, Ambika Linder, Sandra Nyqvist Tutor:Thomas Karlsson Institution:Linnaeus School of Business and Economics - Linnaeus University Kalmar Date:2011-01-14 Purpose:The purpose of this study was to examine unplanned stoppages caused by medical technology equipment failure in the healthcare operation within the hospital of Kalmar. Our study is based on a number of specifically selected incidents which show the consequences these disruptions cause in management, security and quality within the operation. Our intention was also to examine what role the medical technology department of the hospital plays in the care production operation during these unplanned stoppages. Method:Through a qualitative study we have generated material from a number of interviews with staff working in the hospital of Kalmar.
Effektivare röjningssätt med kedjeröjsågen?
After the mandatory rules for clearing was removed in 1994, the clearing area has increased in Sweden. After the storms Gudrun and Per, the areas became planted with new plants, mainly spruce, but also other tree species. Storm areas are now being invaded by naturally rejuvenated birch in the tilling tracks. Since the birch often is initially growing faster than the spruce it is inhibiting the growth and is also damaging the spruce.
The purpose of this thesis is to study the new brush saw with chain and compare it with the conventional clearing saw, mainly in terms of performance and ergonomics. The results show that the new brush saw with chain is very good in almost all clearing operations compared to the conventional clearing saw.
Link QualityControl (LQC) i GPRS/EGPRS
This master thesis has been done at Enea Epact AB. The purpose of this thesis is to develop and implement a Link Quality Control algorithm for GPRS/EPGRS in the current testing tool. A Link Quality Control (LQC) shall take quality values from mobile stations and base stations and decide a codingsscheme that opimizes the throughput of data. The Advantage with LQC is that it adapts the used coding scheme to the channel quality. If the channel quality is too bad for the used coding scheme, a slower coding scheme with more redundancy should be selected.
Kapitalbudgetering och ekonomisk styrning : En fallstudie av svenska skogsindustrin
Bakgrund: Investeringsbeslut är ett av de viktigaste besluten som tas av chefer i företag. Besluten grundar sig på investeringskalkyler, som ryms inom begreppet kapitalbudgetering. I företagsekonomisk litteratur beskrivs sällan samband mellan kapitalbudgetering och annan ekonomisk styrning, vilket innebär att det finns ett tomrum inom forskningsområdet. Syfte: Syftet med uppsatsen är att beskriva hur företag inom den svenska skogsindustrin utformar och använder kapitalbudgetar som beslutsunderlag samt utreda och förklara sambandet mellan kapitalbudgetering och annan ekonomisk styrning. Metod: I studien har kvalitativ metod och fallstudier använts.