When establishing a groundwater protection area it is of great interest to be able to estimate the transit time of the groundwater from different places of the aquifer to the withdrawal well. These estimates can be uncertain due to heterogeneities in the aquifer. As a part of the work to develop methods for a more certain delineation of protection areas, a tracer test was performed in an esker located 25 kilometres NW of the town Uppsala.The purpose of this master thesis was to perform, describe and evaluate the tracer test. Travel times from the tracer test should then enable comparison against stochastic simulated travel times of the groundwater in the area.Three dyes (rhodamine WT, uranine and naphtionate) and a salt (NaBr) were used in the tracer test. The tracers were injected in four different wells located 25 meters from a pumping well.

Waste appears to be a low-cost fuel compared to biofuel. This Masters thesis was conducted for Vattenfall Utveckling AB and deals with how waste in the fuel affects the performance of a SCR-catalyst. Different mechanisms of deactivation were surveyed, focusing on the poisoning mechanism. A literature study was carried out, which was used as a reference when analysing the results.Small samples (9x2x2 cm, 64 pieces) cut out from a full-scale unused honeycomb catalyst were exposed up to 1500h in two different combustion plants, Johannes in Gävle (co-combustion) and Högdalen in Stockholm (waste-combustion). The activity was measured mainly at 300°C but also at 250, 350, 375 and 400°C.

This master thesis sets out to compare the different public transport modes in Stockholm city.Both energy consumption and air pollution are compared. The chosen transport methods are car,bus and metro.Traditionally the rail industry has had environmental arguments as a strong competitiveadvantage when it comes to passenger transportation. However, in recent years the automotiveindustry has been getting more positive media attention regarding environmental issues, forexample Roger Kemp?s statement that the car is the most environmental friendly passengertransportation mode in the UK. This study will show the environmental advantages of railwaytraffic in cities.The energy sources of the world are not endless and the use of the different sources affects theenvironment in different ways.

Dental implants that are integrated into the jaw bones are widely used to replace lost teeth in human beings. Tooth-loss is often related to loss of the surrounding alveolar bone. This can make implant placement difficult and a bone substituting material may be required. The standard method is to use a bone graft harvested from the patient which requires additional surgery than that needed for implant placement. Limitations in the amount of bone that can be harvested also pose a problem.

Volvo Cars in Skövde manufacture and assemble Volvo engines. When attaching the ignition coil to all 4-cylinder engines, a special mounting tool is required. This mounting tool is currently manufactured from injection-molded polyoxymethylene (POM), a thermoplastic. It has been noted that the life span of the tool is shortened as a result of abrasive wear that occurs during the attachment process of the ignition coil.An investigation of the possibility of manufacturing the mounting tool with a 3D-printer is undertaken in cooperation with ÅF, a consultant to Volvo Cars. A literature study is first presented to introduce broader knowledge on the subject.

Att leva med diabetes kan vara krångligt då det hela tiden krävs planering av aktiviteter, måltider och medicinering. Sjukdomen behandlas framförallt med insulin som kan förekomma i pump, sprutor och injektionspennor. Det vanligaste sättet att injicera insulin är med pennor, och antalet pennanvändare ökar årligen. Insulin har stränga förvaringskrav och är känsligt mot hög värme, starkt ljus, skakningar och frysning. De personer som lever i länder där temperaturen över- eller understiger säkert förvarings-intervall har ett behov av att skydda sin medicin, men också resande till utsatta platser drabbas.

This study is about to see whether the two models representing the strategies of lean production is to use and apply in different companies. The models are structured in two different ways in which one of them is checking the softer elements of lean production in the form of leadership and strategies. This model is called Lesat and is based on interviewquestions. The second model, called "learning to see" is about identifying flows. This, together shall then give an idea of how mature companies are when it comes to a whole in the concept of lean production, and susceptibility to use these models to their respective companies. The study is conducted in two companies, SKF couplings systems and AQ parkoprint.

There have been changes in Earth?s climate system on both global and regional scale since the pre-industrial era and some of these changes are due to human activities such as the combustion of fossil fuels. This calls for the development of engines with a higher efficiency and less harmful emissions. One interesting concept is the Homogeneous Charge Compression Ignition (HCCI) engine, which has the advantages of potentially low emissions combined with high efficiency. However, HCCI with diesel fuel requires a relatively long fuel/air mixing time to ensure a "homogenous" charge.

An overwhelming majority of all male piglets are castrated without anaesthesia when they are very young. In Sweden this means that approximately one and a half million piglets are castrated every year. The reason the piglets are castrated is the strong and unpleasant smell and taste, the ?boar taint? that the meat from intact boars sometimes exhibits. Boar taint is chiefly cause by androstenone and skatole, two compounds that are mostly produced by sexually mature boars and are accumulated in the subcutaneous fat.

Transit Objects In the Master Essay I argue around two existing levels in the works presented at the graduation exhibition. On the one hand, it is about influence; on the other hand it is about the phenotypes of purpose-ness. In the introduction, I describe the relationship between the shapes that I have come to call Transit objects, and their on the one hand ideological superstructure; on the other hand, the different aspects of their shapes regarding the imitation I, in creating the objects, performed. In the case with the objects shape-aspects, I stand on the thoughts that I found during my bachelor's work, that is, to express the phenotypes of purpose-ness.When it comes to influence, I speculate about how linguistics, and particularly a branch called neuro-linguistics, illustrates how the arguments that make up our world can be transformed. I use a meta-model and a conversation model as a tool to illustrate this. When I, like that, illustrate the plasticity of meaning, and cognition, I note Catherine Malabous taught (in her book What Should we do with our brain?) on the plasticity of the brain in relation to the neo-liberal systems of capitalism. She argues for how the brain has come to stand model for the organization of different types of networks. I hint the link to a future scenario where the desire to influence takes new forms and uses the latest brain research challenges, more specifically the use of ultrasound for the treatment of pain and other similar conditions. This also can be used as generating various types of seizures, pleasant or unpleasant.

The use of fossil fuels such as coal and gas are a contributor to the global warming. The climate change is a worldwide problem with far reaching consequences that is believed to be very expensive. The United Nations has been introducing a framework convention on climate change. One component of the convention is the Kyoto protocol. The protocol is obligating the developed countries to decrease their emissions of greenhouse gases by 5.2 percent during the time period 2008-2012.

Vaccination of fish can be assumed to cause pain. This study was designed to see if we can minimize the suffering of fish following vaccination. Fishes are cold-blooded animals and thus more primitive than warm-blooded animals. Despite this, many organs, e.g. the nervous system, have the same basic structure as that of other vertebrates. The fibre system for conducting pain is more diffuse than in humans.

The purpose of the house which is the basis of this report is to be able present itself on the market as a relatively cheap and at the same time a climate friendly choice. The house is supposed to be able to be built anywhere in Sweden and the rest of Scandinavia in a short period of time. This puts demand on what kind of heating system the house can have, since not all places have the geographic advantage of being able to use geothermal or district heating. Therefore the heating system choices will only include those that are not limited by their geographic location. The house will be built in modules which only require the groundwork to be done before the house can be erected. In this report "System solutions for plus or passive-housing" a comprehensive literature search has been conducted as well as a number of calculations.

Judged by appearance. This is the conclusion of research made on shopper behavior that revealed that consumers tend to go by their instinct when evaluating vacuum cleaners in a purchasing situation. Many buy the first vacuum cleaner they interact with and few buy pre-planned brands. Almost none even turn the machine on before taking a purchase decision.Electrolux Floor Care Europe has their factory for vacuum cleaners in Hungary. Increased competition from China makes it harder to "only" produce vacuum cleaners with good performance.

The goal of this master thesis project was to develop computer models of some plausiblepretreatment techniques and to assess the potential benefits/costs of using pretreatment andanaerobic digestion for waste management of organic waste from a system perspective. Forthis purpose a computer program called ORWARE has been used. ORWARE (organic wasteresearch) is a program for making life cycle assessments of waste management. As the mainpart of the project work the ORWARE system has been provided with three new models ofpretreatment techniques. The additions consist of: One model of pretreatment with ultrasound,one model of thermal hydrolysis and one model of a screw press.