The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

Uppsatsen ger en överblick av vad synsättet Application Lifecycle Management (ALM) innebär. Enutvärderingsmodell beskriver de analyserade verktygens duglighet gällande ett antal funktionellaoch icke-funktionella krav. Modellen jämför kommersiella verktyg och uppsättningar med enmotsvarande uppsättning av Open Source verktyg. De huvudsakliga problemen idag är att de somnyttjar ALM-synsättet ofta blir begränsade till en kommersiell plattform, vilket får till följd att deinte kan bearbeta sådan data som inte stöds i plattformen. Ett annat stort problem är verktygenskostnad.

Denna uppsats behandlar värdering av företag samt de immateriella tillgångarna varumärke, patent och goodwill. Vi anser att det finns ett gap mellan de teoretiska modellerna i litteraturen och hur värderare praktiskt tillämpar värderingsmodellerna samt hur dessa värderar immateriella tillgångar. I litteraturen framgår det vilka komponenter de olika värderingsmodellerna infattar, men dock anser vi att det inte lika klart redogörs för hur dessa skall beräknas. Modellerna för värdering av immateriella tillgångar är relativt lätta teoretiskt, men pratiskt menar vi att dessa modeller är svåra att applicera, till följd av brist på information samt hur denna skall integreras i modellerna. Utifrån denna problematik har uppsatsens syfte samt problemformuleringar utformats för att skapa en förståelse för detta fenomen.För att få en klar bild av hur värderingar går till i praktiken valdes olika typer av yrkesverksamma värderare ut till studien.

This study concerns design thinking and how to achieve usability when designing applicationsfor smart watches. The study's focus is on interaction and design for online auctionapplications such as Ebay and Tradera. After studying usability and design for devices withsmall screens, guidelines and design principles for interactive systems, we developed apaperprototype for an auction application. The prototype was used for testing our intervieweeswhile observing and asking questions. After collecting the data we analyzed the responses andfeedback on our prototype and combined the results to previous studies.

This thesis lays the foundation of the future routines of effective error repotring fortraffic devices in the raiway sector.If a device, for example a timetable display, stops working it is vital that the device isfixed as fast as possible so that the travelers dont miss any important information.The methods that are used today are old and not very effective. It can take time forthe repairmen to find the right device or locating the broken component. At the sametime he is supposed to maintain telephone contact with central control throughoutthe whole session.The need for a new, more effective, system is vital to make the whole repair pfocessmore effective and let the repairmen work without having to contact the centralcontrol by phone.I started this work by examining the possibilities of assigning every object with aunique identifier (ID tag) that could be accessed by a manual scan device. The ideawas that the ID tag could holw information about the object and be obtained byscanning the ID and get the information presented on a mobile device.The work also included building a internet application that enabled the reader to seeand change the information on the ID tag.The result was a database that stored information of different objects which could beobtained by scanning the ID tag and presented by a internet application..

During the summer of 2005 more than 80 million articles of clothing from China, were being held in European harbours. This was a consequence of a striking increase of imported textile and clothing articles from China since the turn of the year, which was the time when all quantitative restrictions were extincted on these products. To protect its own market, the EU therefore reintroduced import quotes in the beginning of the summer. China?s accession agreement to the WTO comprehends a number of unique provisional regulations which are exceptional for the country and in conjunction with clauses and exceptions within the GATT and WTO these regulations enabled new restrictions on the trade with textiles and clothings.

An analysis of a specific application of anaerobic wastewater treatment at a pulp and board mill, Stora Enso Skoghall, was carried out. A literature study was done and effluent wastewater from CTMP pulp production was analyzed. The analysis consisted of a broad constituent analysis and an anaerobic treatment trial. Results from these test where used to calculate the treatment effectiveness and resulting energy potential at the mill.The literature study and constituent analysis showed that toxicity of the water to be treated, due to wood extractives and sulphur content, was of concern. Detoxification chemicals targeting these constituents where used in the anaerobic treatment trial.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The use of Web applications is a growing area. While the possibilities and functionalities are increasing, so is the complexity of them, together with the threats against them because the complexity also opens up the application to vulnerabilities. It is therefore important for developers to know how a web application can be developed with security in mind.This study?s intention has been to create an introductory documentation of what kind of techniques that exists which can produce higher security, which methods there can be within the development process and what to think about when programming secure web applications. In this paper we have investigated how theoretical manuals in the IT security department handles that area, and interviewed two developers from two different companies to see how they use security in their web applications.The study has an exploratory technical perspective and does not explain how to practically use and interconnecting different security-enhancing technologies, but is more suppose to give a first glance at what is available and sow a seed for those interested to continue reading further about the subject.

This thesis have been performed at Sweco Position in Jönköping. The work was split into two, where one part included an investigation regarding the possibility of developing a cross-platform GIS (geographic information system) with HTML5 and CSS3. A prototype would also be developed within this part.The second part included development of a cross-platform GIS for a client to Sweco Position. The client operates in the forest sector and had already an existing solution, with many problems. The client required an application with delimited functionality and which was not bound to a specific hardware.As the client users often were located in areas with limited Internet access, one additional requirement was that there would be some offline support.The students handle subjects within development of GIS, for example map projections, map services and mapping libraries.The application came to be developed in HTML5 and ASP.net.

Sustainability reports are drawn up for the company's stakeholders and declare the company?s corporate social responsibility. Consumers are one of the companies' most important stakeholders for food companies. This study is aimed to describe how consumers perceive sustainability reporting in the food industry and if the application level of the GRI framework has an impact on how consumers perceive sustainability reports. Consumer perception is described in the GRI principles and the basis is the ICA and Coop's sustainability reports, which are two of Sweden's largest food company.

The Income Tax Act is enacted what criteria must be met to obtain a tax reduction of household work. Household work is the common term for ROT- and RUT-works. The purpose of the tax reduction is to increase job opportunities and to discourage that undocumented work performs.It is only for the labor cost as tax reduction is given for. The concept of labor cost is defined in law as it is not comprised of cost of materials, equipment or travel. The preliminary work provides no closer explanation what the labor cost includes.

An analysis of a specific application of anaerobic wastewater treatment at a pulp and board mill, Stora Enso Skoghall, was carried out. A literature study was done and effluent wastewater from CTMP pulp production was analyzed. The analysis consisted of a broad constituent analysis and an anaerobic treatment trial. Results from these test where used to calculate the treatment effectiveness and resulting energy potential at the mill.The literature study and constituent analysis showed that toxicity of the water to be treated, due to wood extractives and sulphur content, was of concern. Detoxification chemicals targeting these constituents where used in the anaerobic treatment trial.

Communication between people who already know eachother, and who use a social online platform to do so, have been thouroghly studied for years. Thus, the majority of the people we connect with on a day to day basis are friends and acquaintances. As children we were taught not to talk to strangers, and as we grew older we learned to avoid people who act suspiciously. These and many other factors are part of the reason we avoid strangers, but are we doing so wrongfully? Studies have shown that there are many benefits in everyday interaction with strangers, some of which are an estimated increase in happiness and letting people seemingly forget about previous grievances.

Kontinuerlig övervakning av patienters blodsocker under operationer och vård har visat sig givande men krångligt. Företaget Senzime i Uppsala har utvecklat ett instrument för att göra detta. Detta instrument är en biosensor som mäter blodsocker genom att uppmäta värmeflödet som bildas när sockret i blodet bryts ner av immobiliserade enzymer. Vi fick i uppdrag att föreslå reaktoryta med tillhörande enzym.Förslaget vi presenterar består i en reaktoryta av kiseldioxidkulor täckta med akrylonitril-co-polymer. På denna ska glukosoxidas och katalas immobiliseras kovalent i närvaro av glukos.Under projektets gång har vi jämfört våra förslag mot patentdatabaser.