AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.

The Employment Protection Act (1982:80) provides provisions regarding priority of re-employment. A few cases where these provisions have been subject to examination, have been discussed thoroughly in SOU 2014:55. In these cases the Labour Court has identified the question whether the provisions regarding priority of re-employment can be subject to circumvention in an illegal manner. The Labour Court has stated that it would be incompatible with the sense of justice if the provisions could be circumvented to the detriment of employees entitled to priority of re-employment. However, the Labour Court stated that certain conditions have to be imposed for the assessment.After analysis of the conditions, it is established that they are deemed to cause major difficulties for employees, why it is held that the purpose and the function of the conditions are not achieved. The purpose of the essay is therefore to investigate whether the application of the conditions imposed by the Labour Court, need to undergo modifications to meet the underlying purpose of the creation of the conditions.By reason of the difficulty with the conditions, the essay provides three different amendments in which two of the amendments are ascertained to not contribute to such an improvement that they should actually be applied.

Background: Research has shown that people with limited hand function , and above all osteoarthritis of the thumbs , a limited task ability in daily activities. At a disabilities can be the person's identity, well-being and ability to participate in society is changing. Purpose: The purpose is, through a literature review describing occupational therapy Conservative interventions for people with osteoarthritis of the CMC 1 joint and its consequences for the performance of activities of daily living . Procedure and Analysis: The method in this study, a systematic review of scientific literature used. Database search and manual search occurred during the period from March 2014 to May 2014 .

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

SCA is the largest private owned forest owner in Sweden, with an ownership of 2 million hectares of productive forestland. To manage the planning of such large areas and to fit the traditional organization structure of a Swedish forest company, the planning approach is subdivided into three stages; strategic, tactical and operational. The strategic part, based on a statistic sample of stands, returns a harvest level estimate which should then be implemented at actual sites in the tactical part. This procedure can lead to incompatible solutions as the strategic solution is not necessarily possible to translate into actual sites in the tactical plan. The geographic aspect is important in tactical planning due to the large costs for moving equipment and maintenance of a large number of forest roads.

The result of this work is a plan for the development of an 1128 m2 elderly raised garden. The purpose has been to create an overall plan covering the long-term development of the garden. The work process has covered a description of the garden of today, review of requirements, analysis of the garden sections, design of a new plan as well as starting the construction of the new garden. The plan covers a time period of a couple of years to create the new garden since the construction work is carried out during spare time with small resources available. The planning must contain review of functions such as protection from insight, eating area and compost area. Also the esthetic expression must be planned. Colors, shapes, choice of material and plants together make up the esthetic expression. It is recommended to include anything you wish to create in the garden. In a raised garden one has to overcome the step to remove trees and shrubs and think different.

In this report female farmers use of technical equipment is investigated. There is little research made on this subject in Sweden, therefore this report can be seen as an explorative study. Research makes it clear that machinery, throughout history and even today, has been seen as a male area. Heavy machines are often associated with the same attributes as masculinity. Force, power, efficiency and control are some examples.

When a company is part of an agreement there is a risk that one of the collaborators pursues similar business and takes up competition with the partner or chooses to reveal information about their partner to other parties. To avoid this, companies establish a confidentiality agreement that prohibits the parties to reveal any information. Confidentiality agreements that are eternal have become more common in Swedish contract law in commercial relations. As a result, disputes between collaborators have occurred regarding the unreasonable length and validity of the agreement at a later stage.When a confidentiality agreement is considered to be unreasonable, 36 § of the Swedish contract law (AvtL) can be applicable. The paragraph deals with the legitimacy and the opportunities of re-adjustment of the unreasonable contract.

Försvarsmaktens ska kunna hantera risker då det är en normal del av verksamheten. Det gällersåväl vid nationell övnings- och utbildningsverksamhet som vid internationella insatser avutlandsstyrkan. Syftet med den här uppsatsen är att beskriv och till del förklarar hurFörsvarsmakten hanterar risker som personalen i utlandsstyrkan kan utsättas för vid sintjänstgöring. För analysen av beslutsprocessen och riskhanteringen har Bolman och Deal Nyaperspektiv på organisation och ledarskap används. Metoden som sedan har använts är endokument och intervjustudie som omfattar svenska bataljoner som tjänstgjort i Kosovo under åren2001 till 2004.Resultatet visar på att Försvarsmakten styr riskhanteringen genom en för ändamålet rationell ochlämplig metod.

This essay deals with the industrial past, present and future and begins with the impact and importance the industrial revolution has had on us humans, socially, economically and structurally. Today's society has developed from industrial production of goods to the production of services but the industrial sites remains. The essay examines issues concerning the protection of the industrial environment, their status as a cultural heritage, what is done with our industrial heritage and the opportunities it has for the future. Malmö has a great industrial history and now one of the cities oldest industrial sites, the north of Sorgenfri, will be transformed. The essay compares the plan with guidelines for future development from the Town Building Office with an antiquarian investigation for the same area.

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

In 1997, the Swedish parliament adopted a decision on Vision Zero (nollvision) in the road and transport system. Vision Zero means that no one should be killed or seriously injured in traffic accidents in the road transport system (Prop. 2003/04: 160). For the Transport Administration in Sweden (Trafikverket), this means increased demands on security and signage at road work sites around the country. This in turn means increased demands on the contractors that carry out road work for the Transport Administration.

Public concern about the release of toxic compounds from wood-based products drives legislation towards enforcing industries to find and use more sustainable solutions for wood treatment. Plant oils are good alternatives to treat wood, minimizing or even neutralizing the impact on the environment. Wood modification with epoxidised linseed oil (ELO) and acetic acid as catalyst has proven a suitable method to impregnate and protect wood. However, the mixture presents a serious inconvenience because of the quick polymerization of the ingredients that limits its practical application. Therefore, this study was designed to evaluate an alternative method using a two-step process which bypassed the problem above.

Urban density is not new, but rather one side of the continous processes of change underway in the city. During the urbanizing boom of the industrialization, when the cities grew bigger, the first spaces to be built on were vacant and planted areas in the interior of the district. The gardens that once were there were replaced by yardhouses. The idea of urban density is that a dense city means less distance between residential areas and workplaces, resulting in fewer shipments and travelers, which ultimately leads to lower energy consumption and lower emissions. Urban density may lead to shorter distances, but not necessarily. In the wake of urban density the greenstructures of the city is shattered. The possibilities for green areas to contribute to the health of the city and its inhabitants is dramatically reduced.