AimThe aim of this study has been survey the possibilities for short-term stays in the Stockholm Archipelago for people without their own means of transport, own equipment and/or experience of outdoor life.To fulfil this aim, the following questions were formulated:? What communications are available to chalet parks in the Stockholm Archipelago?? What overnight accommodation is available in the chalet parks in the Stockholm Archipelago?? What activities can be pursued in the Stockholm Archipelago?? What is the financial cost of travelling to and staying in the Stockholm Archipelago for a week?MethodWe chose to use six interviews and three observations in order to gain as much insight as possible. Interviews were conducted with Claes Petterson at Waxholmsbolaget, a company that provides transport services in the Archipelago, and with managers for five chalet parks: Rolf Andersson for Finnhamn, Per Englund for Grinda, Arne Johansson for Rånö, Pär Hjärtström and Peter Hösöyen for Gålö and Anders Bedinger for Gålö and Nåttarö. The interviews were recorded in writing and on tape. Observations were carried out at three chalet parks, i.e.

The interest in horses and equestrian sport is constantly increasing, and so is the will in both riders and trainers to learn more about the effect the rider and its equipment have on the horse. The last twenty years, more and more studies have been performed were the horse and its kinematics have been in focus. The access to more advanced technology has made it possible to study areas, which earlier have been hard to reach. The knowledge about kinematics in the horse, and how riders and their equipment interact with the horse?s movement, is also of great interest to veterinarians in equine practice.

The aim of this thesis is to study the situation of minorities in Slovakia before and after the EU-membership and if EU has played a role in the situation. Also the criteria for becoming a member and other treaties regarding protection of minorities between European institutions and the accession/member states are studied. With the help of i.e. literature, relevant internet pages and yearly studies of EU, the conclusion has been made that Slovakia has made an immense change in the state?s legislation when it comes to minorities and their fundamental rights, but that changes need to be made in attitudes as well.

Nature conservation agreement (NCA) is a way to voluntarily protect and manage nature for limited time-periods. The agreement is settled between the government and a landowner. All public authorities can represent the government but it is only the Swedish Forest Administration who does that regularly (because it is the only authority with economic resources for that purpose). Therefore, NCAs are almost only used to protect forested nature. The government agencies have experienced NCAs for about ten years and it is now time to examine how they are applied in the forests. This study is based on a computerized questionnaire to the persons responsible for the LEKO-projekt.

To maintain production in high salaries countries and strength in competition against other companies, it is today more important than ever to maximize production, offer a wide spectra of products and be able to deliver on the customers desire of shorter and shorter delivery time. Flexible production and short time spent on die changes is vital to achieve these desires. The interest for die changeover time reduction grew in the same pace as the demand for increased product variety grew. SMED as a method of reducing time spent on die changeovers were developed in between 1950-1970, by the Japanese Shigeo Shingo.The purpose of this thesis work has been to investigate the result of SMED in a die casting facility, and compare the result from it with the result considering time spent on die changeovers when investing in new equipment. The goal is to implement a thorough investigation by using the SMED method at Tenhults Pressgjuteri AB and make a brochure that have to be simple to understand, in purpose to draw interest to the advantages of using SMED as a method.Commissioned by the Swedish foundry association Swecast, the work has been carried out by studying die changeovers at Tenhults Pressgjuteri AB, where filming and interviews with the operators have been included in the analysis.

The business potential of software defined radio (SDR) technology is studied by evaluating whether or not its characteristics correspond to those particular to a disruptive technology. The maturity of the SDR technology concept is illuminated by analyzing the opinions and perspectives of a selection of representatives for different stakeholders in the wireless communications market. Characteristics as, for example, the degree of consensus about the utility of SDR technology and the awareness of features and limitations are studied by application of the theory of technological frames. This theory helps us understand how and when technology evolution takes place. Finally we describe the value network structures of some potentially viable application areas for SDR and suggest some possible business opportunities based on SDR technology.This thesis is carried out as a case study and the research data is obtained from secondary sources, such as literature and Internet publications as well as interviews with people well experienced in the field of wireless communications.

A group of companies that only recently has caught the attention of Swedish designers, enterprises and media are the so -called "furniture pirates". In Sweden it?s mainly two companies that have ended up in the spotlight. The online stores Ikon M and Designers Revolt are two companies which currently sell replicas of famous Swedish and foreign designers. Although the designs sold are copyright protected in Sweden, and most other European countries, the right holders can only stand by and watch as more or less exact copies are sold for a fraction of the price of the originals.The business model - to exploit the EU?s free movement of goods and the UK's short term of copyright protection in matter of mass-produced art (industrial design) - has proven successful for the companies that practice it.

A group of companies that only recently has caught the attention of Swedish designers, enterprises and media are the so -called "furniture pirates". In Sweden it?s mainly two companies that have ended up in the spotlight. The online stores Ikon M and Designers Revolt are two companies which currently sell replicas of famous Swedish and foreign designers. Although the designs sold are copyright protected in Sweden, and most other European countries, the right holders can only stand by and watch as more or less exact copies are sold for a fraction of the price of the originals.The business model - to exploit the EU?s free movement of goods and the UK's short term of copyright protection in matter of mass-produced art (industrial design) - has proven successful for the companies that practice it.

Due to the requirement for reduced use of insecticides and the lack of competitive mechanical plant protection, you need a scarification with good result. This is often no problem to perform in normal terrain without technical barriers. However, in difficult terrain with large number of rocks and steep slopes, the result would be worse. The purpose of the study is, that in these areas with difficult terrain, to find out the scarified areas quality, describe the non-scarified areas conditions and find out where the limit is for the use of a traditional disc trencher. Findings indicate that there are usually not the machine that is the limit, but the driver of this.

Att försörja sig som streamingpersonlighet på Internet är något som vuxit explosionsartatpå senare tid. Detta leder också till att man blir ett tydligt mål för attacker. Detta arbetehar belyst den problematik som DDoS-attacker skapar när de riktas mot hemanvändare.Olika lösningar på detta problem gås igenom och analyseras. Tester har utförts för attbelysa enkelheten i attacken samt hur den påverkar hemanvändares hårdvara. Testernahar resulterat i att VPN är en kompetent lösning men innehåller även nackdelar..

Abstract Title: Total Cost of Ownership ? Revealing the true cost of owning and operating equipment. Authors: Anna Bladh Anna Ström Tutors: Michaela Boye, Parts and Service, PTD, Alfa Laval Göran Berg, Parts and Service, PTD, Alfa LavalCharlotta Johnsson, Department of Automatic Control, LTH, Lund UniversityBertil I. Nilsson, Department of Industrial Management and Logistics, LTH, Lund UniversityCarl-Henric Nilsson, Department of Business Administration, Lund University Core issue: ?Which costs should be included in a general Total Cost of Ownership model regarding centrifuges, and what input variables are needed in order to calculate those costs in a user-friendly way and with a maintained level of accuracy?? Purpose: The theoretical purpose of the thesis is to identify the cost items that have the greatest impact on a TCO calculation for a centrifuge.

This report is an evaluation of the cooperation between the rescue command centre and the POSOM-groups (?Psychological and social support?) after the Tsunami catastrophe in December, 2004. The report describes the interaction between these two municipal administrations, what services the rescue command centre provided and how they gathered information. Finally the author suggests different solutions to how the collaboration within these different municipal administrations can be increased and improved in future times of crisis..

This paper describes the work done trying to diminish the noise present in the signal from an IR-detector. The project was aiming towards two different kinds of applications; heat protection and presence detection. The hypothesis was that the signal-noise ratio would decrease if a filter and a proper installation were used for the detector. Some experiments were executed to determine what kind of filter were the most suitable for each application and how these could be installed. After executing the experiments and evaluate the results we recommend to use a specific filter for each application.

Intresset för sömlösa stålrör med stora ytterdiametrar i förhållande till tunna väggtjocklekar har ökat tillsammans med att högre hållfasthet i olika stålsorter tillkommit. Detta gör det möjligt att tillverka lättare, billigare och mer materialeffektiva stålprodukter med samma eller högre hållfasthet som tidigare.Denna nya utvecklingsriktning medför förändringar och utmaningar i en av företaget Ovakos produktionslinor i Rörverk 5 Hofors, vilket de har behov av att samarbeta med maskinkonstruktionsföretaget BEKAB för att utvärdera och utveckla.I Ovakos produktionslina i Rörverk 5 finns en del av ett asselvalsverk som kallas för "förreducerare". Denna del av asselvalsverket ser Ovako ett stort intresse i att utvärdera och utveckla för att bättre anpassas till den nya utvecklingsriktningen.  En känd utmaning hos förreduceraren sen tidigare är att den från början är framtagen för att reducera ner ett kvalitetsproblem hos rörprodukterna som kallas för trattbildning. Projektet fördjupar sig därför inom trattbildning för att bättre förstå grunden till förreducerarens nuvarande design för att därefter genomföra en redesign av förreduceraren.I en nulägesanalys av nuvarande förreducerare framkommer ett flertal olika produktionsutrustningsproblem med tillhörande kvalitetsproblem hos rörprodukterna. Projektet väljer därmed att fokusera på de produktionsutrustningsproblem som ger störst effekt för förreduceraren om de löstes.

The art of riding is a fugitive art, which signifies that the means available for documentation of performances are insufficient, and that the equipment used by the old masters are important clues for the understanding of their art. The most specialized tool used for riding is the bit, in particular the curb. As museum catalogues become accessible to the public through the internet, riders will look for information about bits. It is then important that the information provided in the catalogues is valid not just for the curator, archaeologist or art historian, but also for the rider.In this paper, I add context to the bits by explaining two opposing philosophies of bitting, and how they affect the design of the bits. This is followed by a brief history of the art of riding and how the bits have evolved since the 16?th century.