The project has been performed in collaboration with Thule Sweden AB, a global leader in developing safe, simple and elegant solutions for the transportation of various types of equipment. The company has developed a new T-track which is telescopically, they stand mount system to connect the roof box to the roof rack does not fit into this. Therefore, the company considered that it was necessary to have a new product that meets the requirements of the new roof rack. They wanted a new, smarter solution would be developed. The bulk of this essay has been to find a new concept to connect the roof box to the roof racks. The result is a saxkonstruktion that slides down the roof rack T-profile and protected out of a puck-like housing. The product is small, simple and elegant solution.

This final project is an investigation about the responsibility in rooms where the walls and floors are exposed or partly exposed to irrigation of water, as a bathroom, laundry room and WC. The cost for all water damage is valued for 5 000 000 000 SEK each year. How is this possible with all information about the problem and good materials? Who is responsible? Incites had been made in the subject throw reading reports and participation in courses about how to make a room mention above. Discussions have been made with workers in the trade of making the walls waterproof.The conclusion in the rapport is about who´s responsible for the damages and will pay the cost of the renovation. The responsibility is discussed between the contractor and the insurance company.

It has become more common for organization to operate a lot of projects at the same time. These projects affect each other, either in way of resources or technical. Projects in a multi-project environment depend and affect each other, and in most cases they rival about resources, decision-makings and priority. To lead a project portfolio with several projects is a major challenge. The most common problems that occur are vague objective, unclear working conditions, resource shortage and problems of priority.

Bokakademin i Östergötland AB möter framtiden ? En studie av studenters köpbeteende vad gäller kurslitteratur och ett förslag på marknadsföringsstrategi för Bokakademin (Bokakademin i Östergötland AB meets the future ? A study of students? purchasing behaviour regarding textbooks and a proposal for a marketing strategy for Bokakademin)Authors: Fabian Hamnqvist and Emma SvenssonBachelor?s thesis in business administration Linköping University, Department of Management and Engineering, 2013 Supervisor: Mehran NoghabaiAbstractThis paper examines the competition arising from online textbook retailers met by physical college bookstores. The paper examines the implications of college students' purchasing behaviour when buying textbooks, how a specific corporate clientele is composed and the purchasing habits of these customers to the specific company in question. The company used as a practical example is a bookstore located on a university campus of Linköping University in Sweden. Data have been collected using a paper and pen survey of 200 students from Linköping University as well as conducting interviews with eight students and the Managing Director of the company in question.

The cost of capital for traded companies is basically assessed on information from thefinancial market. Small and non-traded companies are lack of this necessary financialmarket information in order to determine an appropriate equity risk premium and tocompute the cost of capital.In the absence of financial information necessary for an external investor, it is difficult toevaluate a non-traded company with the Capital Asset Pricing model (CAPM), which isbased on the financial market information. It measures only the systematic risk, which isthe contribution of one share to the market risk of a portfolio. It is therefore important tofind models that reflect the small and non-traded companies? real business value and theirunique characteristics.

Social medias impact recent years has been huge and an increasing number of companies have started using the services. The benefits for companies to be available thru social media are many and the costs are low. Social media makes it easier for companies to get in touch with their customers and at the same time they reach out to a lot of people since the number of frequent user?s constantly increase. A major part of the information that is available is seen from a company?s perspective and what benefits they can take advantage of thru social media.

This thesis describes the development ofa linear guidance system suited for NORCAN's aluminium profiles. The work took place at LP Innovation, a small technical consulting company, located in Uppsala. The work started with gathering and searching for information. A lot of the information was found in product catalogs, but my supervisor was also a great source of knowledge, as well as the other engineers at the company. I also had the opportunity to work with the rea lprofiles, to get a feeling and greater understanding how they were supposed to be used. With the use of sketching and CAD, a number of concepts were generated.

Purpose: The purpose of this thesis is to investigate potential associations between usage of the cash flow statement report and time perspective in which companies? acts and set goals. Method: Our approach is quantitative, using empirical data summarized in a statistical procedure. The result is thereafter analysed through the developed analysis model from which conclusion is drawn. Results: We have in the investigation stated that the usage of the cash flow statement report varies depending on the time perspective in which companies? acts.

Syftet med denna uppsatts är att utreda hur befintliga servitut påverkas vid fastighetsbildning? vad som gäller enligt svenskt regelverk och hur det tillämpas praktiskt. Fastighetsbildning innebär förändring av fastigheter, genom antingen nybildning eller ombildning. Ett servitut är en begränsad rättighet som är belägen på en fastighet, som belastas av rättigheten, och som får nyttjas av en annan fastighet, som har förmån av rättigheten. I samband med fastighetsbildning kan befintliga servitut komma att påverkas på olika sätt.De metoder som använts är: (1) en litteraturgranskning där den svenska lagstiftningen studeras; (2) en fallstudie där utförda förrättningar studerats om huruvida befintliga servitut påverkats vid fastighetsbildning och (3) en intervjustudie med yrkesverksamma förrättningslantmätare som arbetar på Lantmäteriet.Undersökt litteratur visar att Jordabalken och Fastighetsbildningslagen reglerar hur befintliga servitut påverkas vid fastighetsbildning.

The purpouse of this study is to find out how and if a Content Managment System (CMS) can benefit from applied User Experience Design (UX). A work project has been executed where a client wanted the students to create a user friendly CMS for adding content to a global hotel review site. A prototype of a CMS was created based on literature studies about UX and CMS. The prototype of the user friendly CMS was then tested through user tests and interviews with key users. After input from the key users the prototype was changed until the users were satisfied with it..

The purpose of this thesis is to show what advantages and opportunities social media offer for B2B-companies (business-to-business), and how they can be used for marketing communications.We have studied how companies can use social media, for example evolving the organization, developing products/services, staying up-to-date, building relations, creating customer loyalty and engagement, building the company?s identity and image, and affecting the buying decisions. We have also studied how B2B-companies can choose media channels, set goals, and measure the results.We have carried out interviews, through phone and visits, with four chosen companies that fit our criterias: Swedish B2B-company that is successful in social media.The result of the interviews show that B2B-companies use social media for various purposes, for example networking (to create and build long term relations with other companies) and to improve the company?s image among the end customers. Most of our interviewees reach their end customers (consumers) in first place and customers (companies) in second place, since many B2B-companies do not yet use social media.Half of our respondents mention that social media should not be used for advertising and campaigns (one way communication).

A group of two people, Jelena Durkan and Johan von Heideken, have worked together on an assignment from the company August Lundh AB. The company manufactures plastic products for all sizes of catering establishments. The basis for this thesis is a pre-study which shows that many of the users would be more drawn to the plates that the company manufactures, if there was a motif on the plates.This thesis will present the method of application for the motif that best benefits the company, with regard to the requirements placed on the motif, application method and the costs. The group found five relevant methods that were more carefully examined and compared to each other. Those are:Laser engraving, Hot-stamping, Injection molding, In-mould labeling and Pad-printing.The tools that have been used to solve this problem are: Requirement specification, QFD and OEE.

This report describes how the process has evolved during the creation of a new web page forthe company Scandinavian Travel Agent DMC. The design methods that have been used aredescribed and also how parts of the webpage have been created by using the design methodresults. Our reflections around design and functionality are explained and how usability hasbeen our main focus during the master thesis. We also describe how it has been to work withan external costumer and how the tasks constantly have changed and been added as theprocess has continued.The background to this work is that AB Scandinavian Travel Agent DMC need to improve theircurrent web page. This to give the clients better needed information about destinations, butalso to stand out in the competitive travel business.

Title: Social media as a communication tool - A case study on social media influencecorporate cultureLevel: Final assignment for Bachelor degree in Business and EconomicsAuthor: Jessika Klintsbacka & Oskar BergeSupervisor: Pär Vilhelmsson, Ernst Hollander & Maria Fregidou-MalamaDate: 2014-06-13Purpose of Study: The aim of this study is to inquire into Swedish companies internalcommunication, their approach to social media as an internal communications tool, and if itaffects the corporate culture.Method: The study is a multiple case study with a qualitative research design. The study'sinterview questions were designed by a operationalization of based on theory in the areas ofinternal communication, corporate culture and social media. The interviews took place inApril 2014. The interviews were recorded and then analyzed to bring out the similarities anddifferences between the companies.Results & Conclusion: The study shows that Swedish companies corporate cultures haveconnections with internal communication, and implementation of social media as acommunications tool. The study found that connections to companies with a comprehensiveone-way positive consider social media as alternative communication tool to strengthen theunity and community within the company.Suggestion for further research: One of the study's three companies is owner-led and thiscompany showed a high level of corporate culture.

In the electronic industrials, power control of AC motors is commonly used. For example power control of a washing machine motor, a vacuum cleaner motor or a coffee machine motor. The company Rejlers Ingenjörer AB has many projects where power control of AC motors is included. A prototype card for this task can save time and money for the company in the future and this is the reason for this thesis.The motors are power controlled by a TRIAC and control of the trigging pulses to the TRIAC. This card is modularly built and can easily be adapted for future projects where the power control of AC motors are included.The prototype card can be used as a subsystem in a larger electronics projects or as it is in lab environment for testing and evaluating new motors..