The project Design analysis and proposals of plastic screw caps in Australia was performed at Högskolan Dalarna incooperation with University of Western Sydney, Australia. The Swedish company Tetra Pak, in Lund, were assigner forthe project that was performed 2006-2007. The commission was to do a survey about the packages for non-carbonateddrinks in Australia. The bottles had to be plastic, able to open in one step and with focus on the caps.The project has result in design analysis and a new proposal of a plastic screw cap for the Australian market. Sixbottles were choosen and they were all testet on 20 consumers each with a Likert-scale test.

I want to look at the possibilities to start selling hot water from a small district heating plant with bioenergy. My reason for doing this project is to look at a new business opportunity for our farm. Our company have less work during the winter time compared to the spring and this project will give us more work during the winter. I also want to take as much material as possible for heating from our farm in order to increase the value of the products from the farm. The project is in a village near us, where we should support a school, a churh, a home for the aged, a kindergarten and a parish hall with heat. In my work I have compared two different alternatives with each other. The first alternative is to put a central heater in one of the buildings, the home for the aged, in which we will burn oat.

In the spring of 2006 a pilot project was initiated by The Rural Economy and Agricultural Societies of Sweden together with The Swedish Ornithological Society in order to increase collaboration between bird watchers and farmers. The project as a whole comprised 11 farms in South-Central Sweden. The aim was to benefit the decreasing populations of bird species related to the agricultural landscape. The purpose of this master thesis was to study how similarities and differences between bird watchers and farmers regarding opinions about nature, landscape, agriculture, birds and nature conservation have influenced the collaboration. Four of the farmers and five of the bird watchers that participated in the project were included in this study.

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

LEDAthe chair as representativean exploring work on added value throughaesthetics and function.The project deals with portraying a chair. A chair thatwill raise questions regarding added value, questioning oursurroundings and not taking things for granted. Through anumber of properly selected words, I have built a collectionof objects that possess the basis of a chair. The words arebased on sources of inspiration; I picked up over the yearsand can be seen as a part of me and my inner self. QuestionsI asked myself concerns the impact of aesthetic and how itrelates to the function.

This report aims to describing the work behind the development of a masonry heater.The masonry heater is developed in collaboration with the company Transient Design KB that is a product development company located in Alingsås. The company sees a possibility to cover a market segment where modern technology and design are missing.The report presents those methods and approaches that have been used and gives an overview to how the project has been carried out. It describes how the ideas behind the final results have produced and how they have been developed during the project's time. In the report you can also read about the final concept with its choices of construction and materials.The report is completed with a presentation of a final concept and a ground for possible future production..

In this two years master's thesis a regional project, Futurum.kom, is studied through the experiences of eight librarians from two of the participating libraries. The interviewees have all attended local and regional seminars where questions about core values, target groups and the role of the public library were discussed, among others. The seminars resulted in a number of core values and target groups. During the project, a number of advertising campaigns are to be conducted. The first one of these had recently been implemented at the time of the present study. The aim of the thesis is to investigate the interviewees organizational self-perception in relation to the project.

This project in an in depth exploration about the basics of creating space in the form of an experimental investigation using my own perceptions as reference. Within a method, especially outlined for the project using descriptive words of opposites, my interpretation of the words has been formed into models of rooms. Four workshops with restrictions and rules acted as a platform for the striving towards the aim of a wider understanding of how space can be experienced. Through analysis I have formulated the different parameters influencing space itself and my perceptions of it. During the project a language for visualizing the interpretations of a room has been further evolved.

This study was made to compare construction companies for gardens way to work with up following, with purpose to see if there was an efficient and not resource demanded system which gave much value. To achieve the purpose a case study was made. The delimitation for the case study was only to compare the work with up following on individual project. The delimitation on the companies in the study was from ten to sixty employees. That because to reach companies were it´s not the same person how calculates on tenders and than perform the projects. The study was delimitated to the west side of Skåne. T o be able to compare the companies and to find trends, an interviewguide was made and was used during the interviews with the companies.

This thesis project has been written and accomplished in cooperation with HABO AB. The objective of the project was to develop a standard stated packaging system. The background to this is that HABO is not pleased with the system currently in use. The system which HABO is currently using consists of to many sizes. The largest benefit of a standard stated system is that it becomes much easier to organize the packaging with the aid of a computer program.

Problem: How does project managing appear in small IT-consulting companies and how does the project manager carry out their projects to create successful solutions for their customers?Purpose: The research has the purpose to analyze and review how IT-consults in small companies work and lead their projects to create profitability for the company, which leads to a good development for the company.  Methodology: The research is made on eight research objects in IT-consulting business and the sizes of them are between 1-49 employees. The research is made with a qualitative method to get closer to the research objects. Therefore the research is made in forms of interviews. The analysis is grounded on a comparison between the research data and the theories that are used in the research.Theoretical perspectives: The theories which have been used in the research are Involvement theory (Fill, 1999), PAFF-metoden (Marcusson & Ahlin, 2002), Projektledning (Tonnquist, 2006), Jakten på det effektiva projektet (Engwall, 1999) och Mervärde (Grönroos, 2002)Empirical foundation: The research data are founded from the interviews of the eight research objects, they have the fictive names: Gondor, Minas Morgul, Minas Tirith, Mordor, Osgiliath, Rivendell, Rohan and The Shire. Analysis/Result: Each study object starts their projects with a pre-study phase, as the PAFF-method describes it.

The aim of this Master's thesis is to explore the function of public libraries as arenas for young people's artistic creations. It examines how the public library makes activities based on independent creativity visible, and what activities of this sort imply to the public library. The thesis also relates this to the public library's task in society. The main object of examination is Demoteket, an on-going project in the south-eastern parts of Sweden. In this project Länsbibliotek Sydost co-operates with Reaktor Sydost, a centre of resource in the fields of young communication and filmmaking.

Chunks and Tasks is a programming model based on the C ++ programming language. This programming model is used for electronic structure calculations, among other things.The purpose of this project is to improve the CHT-MPI software library for Chunks and tasks, so that calculations of matrix-matrix multiplications are performed more efficiently than they do with the existing software library. The software library is based on the work stealing method, which is a method the software library for Chunks and Tasks uses for the distribution of the calculation work. The considered way to improve the software library is by modifying the work stealing method in a way that makes the distribution of calculation work happen in a more efficient way , which will lead to calculations performed faster than before.Two different modifications of the work stealing method were tested and it led to two new methods, Method 1 and Method 2, which distributed the calculation work differently. Method 1 did not give results that were compatible with the theory, since the calculation time with this method was much longer than the previous method.

This report is the result of a thesis at the company Sanmina in O?rnsko?ldsvik. The thesis is the final work at the mechanical engineering program at Umea? University.Sanmina has in 2015 launched an initiative to ensure that all sites are using LEAN principles and tools to enhance their business. As part of the plan for the LEAN-work, an LSS (Lean Six Sigma)-project has started to study the company's receivehall and inspection.