In 2014-2015 a large-scale Ebola epidemic occurred in West Africa. The Swedish Civil Contingencies Agency was given the order to conduct the Swedish response. The purpose of this case study was to investigate the impact on project planning of the three factors: the nature of the crisis, political initiative and developing countries. In this case study the crisis was an epidemic, and the project was initiated by the Swedish Government and conducted in two developing countries. The results were intended to contribute to developed understanding and recommendations for future project managers in similar projects.

2013 a decision was made that all projects at the Swedish Transport Administration shoulduse BIM (Building Information Modeling) to some extent from 2015. BIM is an approachthat allows for streamlining of projects by the use of a 3D-model created in an early stage ofthe project. The 3D-model can carry information about the facility throughout its life cyclefrom planning to management. The use of a 3D-model can help the project to detect errors inearly stages of the project when it is easy and cheap to fix the error instead of finding theerror in the construction phase when it is costly and time consuming to fix it. 3D-models alsolead to improved communication both within the project groups and with the public.

This thesis suggest an explanation for is how it is possible to understand that the large arena project in Växjö grew to cost sums of money that initially in the project not would have been an alternative to discuss, how goals changed and how the institutional environment changed the prerequisites of the project. As empirical part of the research, to describe and analyze the project, the municipality?s documentation of the project have been analyzed and semi-structured interviews have been made. Theoretical perspective is taken from the neo-institutionalism in sociology of organizations and change, and theories of the complexity of large projects with major symbolic value and importance. The project starts with the municipality?s investment and cost to be hold back, defined as a necessary condition in order to fulfil an ambitious drive towards new sport arenas.  Eventually the necessary condition was abandoned and the arenas were built with the municipality responsible for the investment, cost and risk in the project.

This major project in Building Engineering has its focus on inquiring into what methods has been used in the planning process of the residential buildingLjusbojen 1. This project has been conducted in cooperation with Kadesjös Ingenjörsbyrå AB, an engineering contractor firm which also acts as the property developer. Initially several different general methods for planning residential buildings have been presented. After the methods from the process of building Ljusbojen 1 has been analyzed compared to the general methods presented in part 1. This shows what the determining factors are during the planning process; factors such as cost, quality, time management, know-how and environmental issues.

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This paper aims to shine a light on the challenges connected to the implementation of a process focused way of thinking in a public service organization. To this we have conducted a series of qualitative interviews, primarily from participants of a university driven project. The project aims to teach decision making employees of public service organizations how to use process modeling techniques to increase their efficiency. We have also interviewed the teachers who have taught the courses included in the project. As a final point of view we have also interviewed a researcher and IT consultants to compare novice users with experienced users of process modeling techniques.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

The ambition with this piece of work, a collaborative project between a landscape architecture student and an architecture student, is to design a centre for art and culture at Lilla Stenshuvud near Kivik in Skåne in the south of Sweden. Though the project draws upon existing plans for an institution like this on the site, it has been independently developed and can thus be regarded as a project sufficient in itself. During the work-in-progress a proposal has been shaped which considers the existing landscape and emphasizes its characteristics. Great effort has been invested in the centre?s location, and thereafter the work has focused on finding an expression for the art centre that connects to the specific character of the surroundings in this part of Skåne.

My work deals with large scale design of the urban fringe. The thesis is divided in three parts; ?Current viewpoints?, ?Infra City ? conditions ? and ?Infra City ? project?. In the first part, I go through the history of trade shortly. Then I discuss the concept of nature, which ends up in a linkage between natural science and aesthetics in landscape architecture. The link between those two makes a project stronger and more multifunctional. The object of my case, Infra City, is a mall situated north of Stockholm on both sides of the E4 motorway going to Arlanda airport.

This project concentrates on musicians who work in a professional music studio.The task of this project was to design a new headphone system called Foldback system.The advantage of this system is that all involved in a music project could influence their ownlistening during the project. With a couple of adjustments should each and everyone get theirown individual listening from their headphone station.This report shows different methods, theories and results that came along in development ofFoldback system. The project has resulted in a finished product that will be in use atStudiomega..

This report is a degree paper made for the Engineering program in Technical Chemistry at the School of Engineering, Jönköping University.The intention of the project which is described, is to answer whether HV71 might become environmentally certified according to the criteria of "miljödiplomering". The project also included an investigation of which further steps and measures must be undertaken by the enterprise in order to achieve the certificate. The final part was to implement the necessary requirements for the certification.The report starts with a short background where the origin and function of environmental management is briefly explained.The report continues with how the practical work with the environmental certification was done according to requirements of Jönköping municipality. Motivations behind each part of the process are given as well as explanations of how each part of the process was carried out.The final result of the project was that HV71 took the measures needed to live up to the required demands. After a revision made by Miljöstrategen i Jönköping AB, HV71 passed the demands and became thereby an environmentally certified business..

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.