Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

The Landscape Architecture Program at SLU, Ultuna provide several design courses. Within these courses, students are mainly introduced to one type of design process, a process based on the specific site and its conditions, known as Genius Loci. This report presents a course and a design methodology from Cornell University which aims to provide students with tools for a more conceptual way of thinking about design and architecture. The design method is presented in two stages. First an introduction to the course description and objectives.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

This report is a bachelor thesis work within the field of Product Development and is also an assignment for Thule Sweden. The work has been performed by Niclas Tjäderborn and Christian Holm, students at the Mechanical Engineering Program with major in Product Development and Industrial Design at Jönköping School of Engineering during spring the semester of 2009.The thesis work concerned the development of a new wheel holder for bike carrier for Thule Sweden. The background to the project was that the initiator wanted a more user friendly wheel holder with better design than those available on the market. The wheel holder is able to be implemented on one or several of Thule?s current wheel holders.

Due to the obvious fact that one can never be hundred percent sure of what's hiddenunder the ground surface, construction work is naturally hard to project.However, many of the work methods are executed in the same way on variousprojects. The department of construction work at JM AB region öst describes a lackof follow-ups and feedback between the calculators and production managers.In this thesis we have studied the communication between these groups and alsohow they share experiences and knowledge. In order to get the full pictureof the day-to-day operations we used three methods to gather information. Studyingliterature gave basic knowledge of theories about feedback, and thenecessity of working with giving feedback. In order to understand the process ofconstruction work we made several interviews, both structured and nstructured.

In this thesis we have examined why the establishment process of travel destination is essential for the tour operators and how the process can be influenced by different conditions. The thesis is written from the perspective of the tour operators and with the tour operator Ving as our case study, we have been able to create a picture of how the establishment process of travel destination may look like.We have chosen to deal with some different areas in this thesis that all are important for the creation of a holistic picture of the process. The overall segments listed in this thesis are the process itself, the tourist, marketing, the product creation and demand. By connecting our theoretical framework to the collected empirical data from our case study, we have analyzed the establishment process and drawn our conclusions..

MindMe is an aid for people with cognitive memory impairments. The aid is completely new and has beendeveloped within this bachelor thesis, no product of this nature could be found on the market before. Theidea came from Niclas Jarhäll, CEO of Mutual Benefits. Mutual Benefits were also partners in the project.The project was carried out by us in cooperation with Bachelor of Science in Innovation Engineeringstudents Malin Albertsson and Victoria Hedman at Halmstad university. The aid consists of a mobile phoneand a number of tags.

In this thesis we focus on the issue of crowdfunding and especially how a project relates to and embraces its community. While a lot of related research focus on what makes people give, our research instead delve into whether a creator looks upon the sponsors as something more than just a financial resource. To manage this task we used a triangular perspective consisting of a case study, a questionnaire and a netnographic study. The goal was to gain the perspectives of creators, crowdfunding platforms and sponsors on how the communication between the community and the project works and can be improved.       The three crowdfunding platforms we reviewed (Kickstarter, IndieGoGo, Rockethub) all had fairly similar models on how to attract sponsors and make them involved in the project, while the questionnaire and netnographic study demonstrated how a community could contribute in different ways.

This essay aims to investigate the affects of interaction between different professions ina municipal project. In the project, professional representatives from the social servicesand schools have collaborated with staff in preschool/school and exchanged knowledgeto improve the work around children with antisocial behavior. It is in this essaysambition to create an understanding of how professional practitioners, with a monopolyon certain knowledge, influences the possibilities and limitations of cooperation in amunicipal project. This is examined through six qualitative interviews with members ofan municipal project. By using theories about professionalization, social closure,alliance strategy and social control it is possible to understand how division intoprofessions creates opportunities and limitations of interaction exchange incollaborative projects.

The aim of this project was to create an interior design for a children?s hospital patient room with the concept to adapt the room for the wide target group from 0-18 years of age. The analysis in the project is based on the hospital ward 322 at Drottning Silvias Children?s and Youth Hospital in Gothenburg. It?s an oncology ward where the children are very sensitive for infections and therefore need to be isolated in their rooms for 3-4 weeks.The main goal for the project was to create a room that works as a template and gives the people who lives in it the opportunity to create thier own room based on the personal things they bring into it, and how they decide to furnish and use the room.The result of the project is a template room with fixed furniture that can be transformed due to screens in the room.

?Historiska Bakverk? is a project about different pastries from a historiacal perspective.The goal was to create illustrations and typography inspired by differentpastries, in order to communicate something about their history and what layunderneath. The project aimed to highlight, understand and acknowlage thepastries as an important part of our history and cultural heritage. Importantquestions I have dealt with throughout the project was in what way the pastriestell us about our history, how it has changed them through time. The result, aseries of posters for croissant, doughnut and pretzel, are a combination of boththeir history and my own experience of them.

An important task for project managers in multi-project environments is to effectively choose the right people to the project team. For organizations, it means being able to prioritize and plan human resources among the various projects running in parallel. The purpose of this paper is to describe how a project manager in multi-project environments looks at the allocation of people in their projects. We did our research through literature reviews and interviews with seven project managers.The research shows that the studied organizations highlight both the expertise and the personal factors in an election. They do not use any specific personality test to identify their staff.

This degree project handles acoustic measurements of the heat pump EcoAir 107, made by Enertech CTC AB. The sound from the three sound sources of the heat pump, fan, compressor and four way valve, have been measured to find out how they affect the total sound level of the product.Measures to attenuate the sound level have been developed and tested. By comparing these with the sound of the heat pump, in its original state, we have found out the measures which have best effects.The best attenuating measures came to be: taped openings and holes around the compressor space, isolating the top and the bottom of the whole construction, support of the fan bottom part and shielding of the sound source with a screen at a distance of 110 mmThese measures have been tested together and an average attenuation of the total sound level with 3,9 dB have been accomplished. In the front of the fan where the continuous sound is the strongest, the attenuation was 4,7 dB.This project is meant to be used as a guide by Enertech CTC AB:s during their future developing process..

The project was performed in collaboration with Husqvarna, one of the world?s leading manufacturer in the market of electric outdoor products. The report is a thesis work of a bachelor mechanical engineer program, in the field product development and design.The project is a study of the development opportunities within drive belt for a gear driven gearbox to one of Husqvarnas petrol powered hedge trimmers. A big part of the project was also to find combinations of materials for all components in the gearbox, to reduce weight and maintain or improve the performance of the system. Belt drive was of interest to investigate as an alternative solution to the current design that can reduce wear on the system at a performance test performed in the company before the product is released to market.

The project group is participating in a measuring project that is a cooperation between CIT EnergyManagement AB, the Measuring unit of Chalmers and College of Dalarna.The results from the measurementswill be put together and presented in a brochure.When designing the brochure a great deal of planning has been made how to attract the targetgroup.To make the contents of the brochure more attractive, which mainly will contain text, a lot of imageswith a symbolic substance have been used. To keep the brochure together it has been divided into fivechapters that each has been given one specific colour. The colours are consistent on initials, headlinesand images.At the moment the results of the measurements are not yet ready and the text for the brochure is notpossible to complete now. This project is expected to finish in the fall when all the measurements havebeen compiled..