ABB Surge Arrestors in Ludvika have for a long time had a problem to keep the moisture at a steady state in the production of their ZnO-powder, that is used to produce varistors.Some black-box models of the spray drying process have been designed and evaluated to find a solution for the problem. After evaluating the collected data it has been found that variations in the supply voltage causes control difficulties for the operator. A cascade control system was designed, consisting of three PI control loops designed with lambda tuning. The disturbance in the supply voltagewas used as a feed forward in the control system.At the end of the project the control system was installed, and tests were made to verify the functionality of the regulator. It was shown that most of the variations in the moisture of the powder could be eliminated using small resources, through purchase of a process controller and four power meters.

Bactiguard is a Swedish company within the field of medichal technology. The company has been very prosperous since it was founded in 2005 and was electedÅrets MedTechföretag 2008 ?MedTech Company of the year 2008. According to a definition by NUTEK, Bactiguard is still considered a minor company ? despite high market value and international expansion.

In 2011, I and fellow student at Gotland University created a multimedia game. To fit the time constraints a ?vertical slice? was created. This means a small sample of the game is taken which allows the user to understand how the game works, and at the same time, get a visual demonstration of how the game is designed. The goal of the project was to create a narrative for stadium games in which the backstory is told as players interact with their surroundings.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

The aim of this qualitative respondent investigation is to delve into the various views that teachers have concerning the ?One-to-One project?, as well as the use of computers as an aid in teaching. One-to-One means that teachers and students will be equipped with a laptop they can use at home and at school.This essay looks at how several factors have changed as a result of this. These factors are threefold: the role of the teacher, the teaching experience, and the student´s learning process. In order to answer the mentioned questions, four interviews have been conducted at two different high schools in southern Norrland.

Galna Glassen is a company that has a unique way of selling ice cream in Sweden. The idea is for the costumer to be able to compose their own favorite ice cream, partly by choosing the flavor of ice cream but also by picking the ingredients. The ingredients that can be chosen from are around twenty and can be everything from cookies to candy to berries. When the costumer has chosen their ice cream and ingredients they are mixed together on a cooled granite board.The company was very successful when it was founded in the summer of 2011 and decided to expand to other cities in Sweden. They also wanted to explore the profitability of a mobile sales unit that is intended for festivals and events.The thesis is meant to develop Galna Glassen?s mobile sales unit.

I got a request from Eleiko Sport AB regarding them needing help with trying to improve one of their products. The following examination project includes the principal- and primary construction reports within trying to make some improvements and optimizations on a stand for Kettle bells. I have in this project both made my own proposals to the stands legs, proposals on how to strengthen the shelf and also made an optimization of the original Kettle bell-stand. In this report, the project goes from idea to being built and analyzed in Catia, including the creation of drawings and material definition..

AbstractThe purpose of project is to study the possibility for Borås Energy & Environment to build and run a commercial ethanol production facility in Borås. The project also studies the technology for the production of ethanol using renewable energy, e.g. lignocelluloses with focus on two processes, svag-syra hydrolyse and enzymatic hydrolyse. The technology of the process is based of hydrolysation of biomass (hemicelluloses and cellulose) to sugar and extract it to ethanol. These two techniques will compare with each other to determine which of them that it?s more suitable for ethanol production.

AbstractThe aim of this thesis is to investigate an experimental work in the region of Kronoberg and to study, from the actors? point of view, what possibilities there are for cooperation when it comes to hastening the introduction for newly arrived immigrants on the labour market, and also what possibilities the cooperation entails for the newly arrived immigrants to integrate on the labour market. The thesis employs the following research questions to answer the purpose:How do the actors in the project work to fasten the introduction to the Swedish labour market?Which opportunities and obstacles do the actors experience for cooperation in the project?Which consequences do the actors experience that cooperation in the project bring for the newly arrived immigrants? opportunity to integrate on the labour market?In order to answer the questions, ten actors involved in the project have been interviewed. Also written documents have been used.The conclusion of the study is that explicit goal and explicit division of the responsibilities in the project have made the cooperation easier.

This bachelor thesis portray a project where the main task were to develop a computer based system prototype for handling of absence report at the upper secondary school af Chapman in Karlskrona. The project has been conducted in cooperation with students from the university programs software engineering and information economy at Blekinge Institute of Technology. Our task as MDA-students have been to survey the process of absence report of today through field studies and give a proposal of a graphical user interface which later were developed by the software engineers. The thesis also handles the cooperation with other students from other university programs..

The health care sector is one of the most information-intensive institutions in Sweden. Big investments in information technology have been made to ensure efficiency and quality within organisations in health care. This has led to high requirements in documentation and resulted in an increase in administration which gradually more often is done by nurses and doctors. A major problem is that it is difficult to gain access to the information recorded in all the different systems, which is their objective. This causes double documentation instead of being a support in follow-up performance.

Driving simulators are a very important part of the research that is done at VTI. Enhancing the realism and creating a better driving experience in the simulators are very important and an ongoing work process for the engineers and researchers who work with the simulators. This project has been done as a part of this developing process and the purpose is to enhance the realism of the rear-view mirrors.Simulating realistic rear-view mirrors has been demanded, not only from the researchers at VTI, but also from car and truck manufacturers. To achieve a realistic mirror view a method to measure and parameterize real mirrors has been developed. The code for the existing graphics system has also been redone to be able to handle the new types of mirrors introduced..

The aim of this study is to examine the investment decision process for investments that arise due to strategic changes and are of strategic importance to the company. At the foundation of this study is the previous research in this area, done by King (1975) and Bower (1970), which examines the investment process on a more generic level. At the core is the investment decision process pertaining to Projekt X, an investment performed by NordiCorp. Having conducted a case study including six interviews with employees from various parts of the organization, combined with a large number of internal documents, the process regarding the investment decision was carefully illuminated. The results show that in many regards, this process follows the more generic investment process.

The title: ?Klara färdiga GÅ? can be translated as ?Ready steady GO?, and is ment as a request to start move. In this project I want to invite people to walk more by creating creative, demanding and playful walkways and paths, where the body can be allowed to work just a tiny bit harder.It?s because walking means exercise and fresh air, for free and without spetial equipment. Walking can also be fun, it allows people to stop, change direction and experience things.I think activity should be fun, inspired by children playground my project is a contribution to how adults might stay healthier in a city, where too often healthy activity is solely confined to the gym or sports fields.