The purpose of this work is to study a circulation project in Enköping municipality, where the society?s rest products are used to make beneficial products. In Enköping the rest products from waste treatment plants and private sewers are used to fertilize and irrigate Salix plantations that later are harvested and burned at the local combined heating and power plant, ENA Energy AB, to produce electricity and heat. Possibilities to apply this kind of project ona municipality in Russia are also explored.Guryevsk municipality in Kaliningrad region was chosen since there is a need to improve energy systems and reduce emissions to water and air. This municipality strives to become environmentally friendly.

Detta kandidatarbete handlar om planering, exploatering och naturvärden i den svenska fjälen. Syftet med denna uppsats är att studera och analysera hur planering och exploatering i de svenska fjällen påverkar den naturmiljön som finns där. En del av syftet består av att studera hur turismen påverkar planeringen, en annan del är att se hur naturmiljön påverkas av exploateringar. Genom exempel i från den planerade exploateringen av Rödkullen i Åre kommun skall problem och möjligheter som kan uppkomma vid planering och exploatering belysas. En fallstudie har gjorts på Rödkullen i Åre, ett naturområde som inom snar framtid ska exploateras.

Thesis in Musicology and Artistic Practice by Anders Soldh. Part of the work for the master?s degree. Studies from School of Music, Theatre and Art, University of O?rebro, 2007.

The purpose of this project is to examine the development of the upper secondary school physics course and from this get a better understanding why the course is organized the way it is today. The timeless argument for studying science in school will begin this essay. After that the reader will be aware of when important discoveries in physics were made. Then school history is presented. In this part we are told when the first school started in Sweden, but the focus lies on the upper secondary school and the physics course.

Detta arbete har tagit fokus på en ännu outforskad företeelse i svensk kommunal planeringspraktik, nämligen något som här kallas ?konsultplanering?, det vill säga konsultmedverkan i den kommunala planeringen. Uppsatsen har avgränsats till att handla om ?planeringskonsulter? och konsultuppdrag som konkret handlar om planering och inte olika utredningar etc. som i och för sig också ingår i planeringsprocessen och ofta utförs av konsulter. Ämnet är intressant eftersom det idag är vanligt i de flesta av Sveriges län att kommunerna använder sig av konsulter. Studiens syfte är att studera den ökande konsultplaneringen i den svenska kommunala planeringspraktiken, samt dess positiva respektive negativa konsekvenser för planeringssystemet.

Examensarbetet behandlar det s.k. Kingområdet i södra Helsingborg. Planområdet benämns som King i arbetet, har en storlek av ca 45 hektar och ett avstånd till innerstaden på ca i kilometer. Området består idag främst av bangård och verksamheter av olika karaktär. Under en kommande 20-årsperiod kan stora förändringar förväntas ske i dessa delar av staden och det är i denna utveckling som arbetet tagit sin utgångspunkt.

The project Design analysis and proposals of plastic screw caps in Australia was performed at Högskolan Dalarna incooperation with University of Western Sydney, Australia. The Swedish company Tetra Pak, in Lund, were assigner forthe project that was performed 2006-2007. The commission was to do a survey about the packages for non-carbonateddrinks in Australia. The bottles had to be plastic, able to open in one step and with focus on the caps.The project has result in design analysis and a new proposal of a plastic screw cap for the Australian market. Sixbottles were choosen and they were all testet on 20 consumers each with a Likert-scale test.

This study has been carried out in cooperation with Unilever and partly with the EC founded project, Smartdoc IST-2000-28137. In areas of statistics and image processing, both the amount of data and the dimensions are increasing rapidly and an interactive visualization tool that lets the user perform real-time analysis can save valuable time. Real-time cropping and drill-down considerably facilitate the analysis process and yield more accurate decisions. In the Smartdoc project, there has been a request for a component used for smart filtering in multidimensional data sets. As the Smartdoc project aims to develop smart, interactive components to be used on low-end systems, the implementation of the self-organizing map algorithm proposes which dimensions to visualize.

In the EU there are EC Directives that Member States of EU should follow. Sweden has undertaken to transpose EC Directives regarding the working environment to Swedish Provisions.  In 4 April 2006, the European Commission had some criticism against the Swedish implementation of the Construction Sites Directive. The Swedish Work Environment Authority has in response to this criticism reworked the Work Environment Act and related provision about building and civil engineering work. The changes came into force 1 January 2009.These changes have resulted in some working methods and even new responsibility subjects must be reviewed. The purpose of this exam project was to investigate if contractors and clients in the construction sector, had have time to update themselves on this front and adapt to these changes.

This report is focusing on problems with introducing standard enterprise resource planning systems (ERP) in businesses. A study has been carried out on a service and support department at a Swedish heat metering company, SVM North Node. The study aims to help the company become a better customer in choice and customization of a new ERP system. We make a description of the department studied and the work carried out there, on the basis of learning, knowledge and cooperation. As a final point we present some ideas on how computer systems could support their work, hoping that this will result in them making adequate demands on a new ERP system..

IT is a natural part of the work today when it comes to projects. There are many aspects that are wholly or partly dependent on IT support actions to proceed efficiently. Although there is still situations where IT is deselected as a tool. The factors that make it look like this is not always included in the calculation, which resulted in the failure that could have been remedied with the right tools to solve the problems. The project form which today is increasingly common with all major groups involved enables IT tools' impact also becomes an increasingly provided they are used properly.

The project Design analysis and proposals of plastic screw caps in Australia was performed at Högskolan Dalarna incooperation with University of Western Sydney, Australia. The Swedish company Tetra Pak, in Lund, were assigner forthe project that was performed 2006-2007. The commission was to do a survey about the packages for non-carbonateddrinks in Australia. The bottles had to be plastic, able to open in one step and with focus on the caps.The project has result in design analysis and a new proposal of a plastic screw cap for the Australian market. Sixbottles were choosen and they were all testet on 20 consumers each with a Likert-scale test.

I takt med att besökare och patienter ökar måste kontinuerligt Östra sjukhuset verksamhet utvecklas. Detta medför omläggningar i trafiken och förflyttningar av verksamheter. Idag finns flertalet brister kring Östra sjukhusets fysiska planering som behöver ses över, dessa är bland annat trafikflöden, säkerhetsaspekter och parkeringsmöjligheter.Rapporten redogör för förändringar i den fysiska planeringen som förbättrar dess utformning. Genom studier av relevant litteratur och diskussioner med expertis har förslag av problemområden tagits fram. Dessa har sedan bedömts efter listor av deras respektive för- och nackdelar som kunnat urskiljas.Arbetet visar framtagandet av ett väl fungerande förslag som kan verka som en bas för idéer till nutida och framtida förändringar kring den fysiska planeringen.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

Hanterbara båtar is a new company who builds alumina boats customized for people in wheelchairs. Due to the fact that the company only built two boats yet, the production documentation is not complete. The drawing that does exist is not in an exact standard which makes production planning harder.The purpose of this work has been to make the production of the boat easier and simplify further development and modification. Product development in the form of optimizing details is also one of the main purpose of this work.This is all done by making a 3D-assembly of all the existing drawings. After this is done new drawings will be made and added to the main assembly.