Edsbyverken Office Furniture has over the past 100 years been producing delicate carpentry products, chairs and skiis, but more recently the focus has shifted to furniture for the modern office environment. With a wide selection of products and its characteristic neutral design, Edsbyverken has an extensive group of clients both in Sweden and internationally. The aim of my C level thesis project was to examine the materials Edsbyverken is currently using in order to develop new designs or product functions. Simultanesously, I also wanted to verify whether the method I developed for this project - to initially undertake a comprehensive study of the chosen materials and thereafter specialise on a certain product and target audience ? was effective and successful.

This thesis is a feasibility study for a future product development project. The purpose ofthis project is to evaluate the possibilities and difficulties associated with the design of anelectric power assist servo for all terrain vehicles (ATVs). The project has been carriedout in collaboration with Nira Control AB. Nira designs and manufactures electric andelectro mechanic products mainly for the motor sport market segment.Nira Control AB is developing a fuel injection system for a new line of large ATVs oncommission. To be able to compete with manufacturers like Yamaha and Honda thecommissioner should be able to offer optional power assist steering.

This project is a contribution in the debate of sustainable city planning. The conceptual ideas in this project can be used on many places and are here applyed on the center of Nacka, outside of Stockholm. The essay is based on an entry in the competition Europan 9, advertised by Europan in collaboration with the municipality of Nacka. The theme of the competition is ?sustainable city and public space?. The discussion of the sustainable city is a very wide subject which needs to be narrowed to suite the context of Nacka.

At the Department of Technology and Built environment at the University of Gävle there was an interest to study GNU Radio, which is an "open source radio project. The project is based on that most of the radio signal processing is made in an ordinary PC. The idea behind this degree project was that in a laptop there are several radio transmitters/receivers that takes space, generates heat and transmit in varied frequency band etcetera. All these radio transmitters/receivers could be replaced with a Software Defined Radio system. It means that one common, general radio hardware is used to different communications such as: WLAN, Bluetooth, GPRS, 3G etcetera. The waveform is generated in the software, which makes the system very flexible.

This report is a master thesis performed by Adam Lundin at the company Sandvik Coromants production facility in Gimo. The work started in January 2013 and went on for the duration of 20 weeks, which is equivalent to 30 hp. The project was executed at the department GVR10. The scope of the project was to create a base for improvements in the purchasing process of direct material to the production. The background to the project was that the centralized purchasing department has gone through changes and decision was taken to decentralize the purchasing of direct material to Gimo.

Compared to all existing ethnic groups in Sweden, the integration of Somali women has failed the most within the aspect of employment. This bachelor?s thesis investigates the obstacles in the integration of Somali women by focusing on one case, a project named ?Kvinnokraft?, partly financed by the European Socialfund.By interviewing eight key actors, opinions about obstacles in the project have been identified. A theoretical framework that incorporates integration, project research, multi-level governance and intersectionality contributes to explaining difficulties in integrating Somali women.The empirical findings show that there are individual, social and institutional holdbacks. Stereotypical perceptions were common amongst officials, which contributes to a creation of an inferior position in the structures of the society for Somali women.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

I de flesta offentliga organisationer arbetas idag i projekt¬arbets¬form. Dessa organisationer måste ta hänsyn till att projekt inte längre är ett undantag och skapa strukturer och metoder för koordination av projektverksamheten. Vid projektplaneringen kan ett antal olika metoder användas för att undvika fel och brister som lätt uppstår när flera personer är inblandade. Fel och brister gynnar inte den inre effektiviteten. Ett likartat arbetssätt, ibland i form av projektmodell, kan användas för ökad kontroll av projektarbetsformen.

Analys Handelshamnen, förslag till utveckling av Handelshamnen i Karlskrona är ett examensarbete för en kandidatexamen i Fysisk Planering från Blekinge Tekniska Högskola 2008, skrivet av Jesper Borgström med Anders Törnqvist som handledare. Den 5 december 1679 togs det officiella beslutet att grunda staden Karlskrona och örlogsbasen. 1998 upptogs Karlskrona på UNESCO:s världsarvslista med motivationen: ?Karlskrona är ett utomordentligt väl bevarat exempel på en planerad europeisk örlogsstad, som influerats av äldre anläggningar i andra länder. Karlskrona har i sin tur tjänat som förebild för efterföljande städer med liknande uppgifter.? Handelshamnen är en utfyllnad, området fanns inte med i Karlskronas ursprungliga stadsplan utan har tillkommit senare.

Utomhusbelysning i staden berör många. Det är en angelägenhet för stadens invånare, fastighetsägare och politiker för att bara nämna några. Idag arbetar människor under dygnets alla timmar och fler vistas utomhus kvälls- och nattetid. Det ställer krav på belysningen, eftersom människor måste kunna ta del av staden även när det är mörkt. Det här kandidatarbetet syftar till att ge en inblick i vad god utomhusbelysning kan tillföra ett gaturum och hur ljus kan användas.

This bachelor essay aims to illuminate different images and ideas about Bellevue industrial area.The area is situated in a district in Gothenburg, called Gamlestaden, where Bellevue industrialarea is a former industrial area, today mostly used by minor occupations. The district is facing amajor transformation, based on a detailed master plan. One aim is to create a district with mixedfunctions; like residences, businesses, offices, services and cultural activities all together. Thisessay is based mainly from a user perspective, but it also has the perspective from the ideas andvisions by the City Planning Office.The material is mainly based on interviews with seven informants, representing different kinds ofoccupations in the area. One interview is also made with a city planner.

It has become increasingly common for a city or region to use sporting and media events to promote themselves. But what is behind these events? What kind of organisation is necessary to plan and run them? In the summer of 2009 the internationally known Volvo Ocean Race will arrive in Stockholm. The race is eight months long and will be hosted in Stockholm for almost the whole of June. The City of Stockholm is behind the event and Stockholm?s marinas will be responsible for making sure that everything runs smoothly and on schedule.

SECO Tools manufactures tool inserts for all types of metal cutting machining. (Ti,W)C is a common raw material used in the production. At arrival, the material (Ti,W)C is always analyzed. Titanium has previously been analysed with x-ray fluorescence spectrometry, but as the calibration has previously been performed with two different types of titanium (rutile and metallic titanium), the results has differed. Because of that, this thesis project has been devoted to analyze titanium, to find the best titanium compound for producing standards.The work has been performed using literature studies and many experiments in the laboratories at SECO Tools inFagersta,Sweden.

This has been a thesis work for an bachelor degree at Umeå university. The work has been done at LKAB?s facilities in Kiruna and its main purpose has been to investigate and construct some conceptual designs for replacing a screen with magnetic separation in KA3 concentrator plant. First all information available about magnetic separation was gathered and studies of magnetic separation at the sorting plant and studies of the plant KA3 was conducted. Companies that manufacture magnetic separators were contacted.

Urban planning is not only a matter of architectural trends; it is first and foremost political. This thesis seeks to understand the links between political ideas and visions for the city and the physical structure of the city. The study aims to construct a model to help understand these links, a helpful tool in analysing a city, focusing on the one hand at the physical structure of what I call "The City as a Welfare Provider" and on the other hand at "The City as a Growth Engine". It also sets out to test this model in an empirical study of Stockholm and the soon-to-be built district of Norra Station in the same city.The analysis shows that Stockholm has ambitions to be a welfare provider to its citizens, but have also adopted to a discourse of interurban competition which stresses the importance for the city to enhance economical growth. What is interesting is that the physical structures promoted in the planning documents of Stockholm are nearly exclusively those associated with the model of "The City as a Growth Engine"..