Efforts to achieve a moisture proof construction process have proved to be considerably complicated, despite the knowledge and awareness that now exists within the moisture field. Materials, documents, templates and checklists are designed to be accessed but are not used anyway. This may be because such effort has not been prioritized and properly requirements have not existed from the commissioner of a building.This report illustrates how the commissioner of a building project can achieve a moisture proof building process by increasing knowledge, moisture proof planning, and implementation of security moisture routines. Proposals are given on how the commissioner of a building project can work to consistently bring a moisture proof building process in all stages. The difficulty with regular moisture proof efforts, the authors believe is mainly due to the following points:      Many different design solutions.      Lack of experience feedback.      Lack of communication.      Financial incentives.      Attitudes.The interviews in the report have conducted with the help of a qualitative analysis, while the survey has been done using a quantitative analytical method.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

Due to deficiency in dementia care, the government has commissioned the National Board of Health and Welfare to develop national guidelines for health care services to people with dementia and support for their relatives. It has been allocated stimulus funds that may be applied for to work on improvements in dementia care. In August 2010 these guidelines formed the basis for a decision made that collaboration would take place between the county and the municipalities regarding dementia care in Halland, named Anna's path. The aim of this study is to investigate, analyse and describe how our respondents in the project Anna?s path are planning and preparing for the implementation of the registry of quality BPSD - Behavioural and Psychological Symptoms of Dementia.

Bachelor thesis, Trolley Innovation Project, has been unique in the sense that it has been carried out over the borders of Sweden. Iacobucci S.p.A, located outside of Rome in Italy is one of the largest manufacturers of interior equipment for aircraft in the world. With approximately 30% of the market Iacobucci S.p.A is one of the world's largest manufacturers of catering trolleys.The aim has been to produce a new competitive catering trolley for the airline industry. With customers and users in focus, the project team found that weight, ease of use, ergonomics and design were important aspects. Having a low weight of all the interior is particularly important when there is lots of money for the airlines to save in reduced fuel costs.

This thesis has been carried out at the Department of Urban and Rural Development at SLU Ultuna during the spring semester 2009. The topic of the paper is how energy consumption can be influenced through design and if the conditions for good design decreases when solutions based on energy efficiency are used. The report is divided into one literature study and one part where energy efficient solutions are used in a design. The thesis work has its origin in a project called "Energihus i Uppsala." The planned building will be a center for energy research in Uppsala. The project aims to demonstrate to the public what is currently happening in research related to energy.

Det här planförslaget för omgestaltning av Hoglands park har strävat efter att göra området till en fungerande offentlig plats. En sådan bör inbjuda till möten och diskussion, vilket den nya parken också skulle göra i ökad grad genom att fler målpunkter för fler människor införs. Planförslaget har även sökt ett mer varierat rumsligt uttryck, främst exemplifierat genom gröna rum med olika grader av öppenhet och slutenhet. Placeringen av en byggnad med portalfunktion i parken har tillsammans med en tydlig entré också syftat till att skapa tydliga rumsliga avgränsningar. Tydlighet har även varit ett nyckelbegrepp för den nya vägstrukturen, vilken ändrat fokus från öst-västlig riktning till nord-sydlig, och på så sätt stärkt Hoglands parks position som vistelserum.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

In this essay the renewal of the modern sacred art has been examined through the creation of three works of art from the art project ?Kyrkorummet?. The aim has been to show that renewal of the modern sacred art is best accomplished by the combination of the artist history and Bible knowledge and the open mindness of the beholder towards the new and creative, in order to communicate the gospel in modern time.The large extend of the art project demanded a selection of the art works. Therefore, three were chosen and they show the last supper and the baptism in a renewal way including both symbolism and creativity. To complete and facilitate the analyses, a theme, light and water, have been used as well as relevant theories in art history with Kandinsky as main art critic.Through the art project and it?s teaching, history in combination with present time through visits in different and modern churches, thoughts have been stimulated and the result has been new works of art that speaks of our time.

This Master Thesis discusses the development of bids for regulation power with consideration of change of discharge. The study was initiated by Vattenfall PD and is a limited part of a substantial development project at the same division. The background of the project is the new demands from SvK, which among other things includes more detailed regulation bids. As from the 1st of November 2008, the regulation bids are supposed to be calculated regarding each specific regulation object, something that is defined by SvK. These new demands changes Vattenfall?s conditions and will increase the need for detailed knowledge about available regulation power and costs for regulation.In this study a strategy for regulation bids was developed.

This Masters thesis is concerned with the complex planning process of setting up a citizen bureau in a public library. The aim is to find out how citizen bureaux are designed and to suggest a simplified model of strategic planning. The planning process is studied from a business perspective in the library context, and this perspective is also used to study citizen bureaux and their written plans elsewhere. A combination of qualitative methods are used: observations, focus group discussions and interviews. Observations in the public library showed a great need for an environmental analysis as well as structure to the planning process.

Urban densification as a planning strategy is of interest in the planning context of today. It is also seen as a part of the sustainable development. Urban densification as a concept is commonly used in the discussion of a sustainable development. Thus, the question about urban densification is an important challenge in the current planning context. A deeper understanding of the process which urban densification has developed from is necessary, since planners then will be more able to manage this challenge.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.