This term project addresses how to develop construction drawings for a general contract. The project contains supervision, including blue prints as support as needed.Apart from directions on how to carry out the actual work, the supervision also discusses regulations governing all construction drawings. The supervision is created as guide for similar projects.The construction drawings is a complete construction guide, hence it includes all construction drawings. In addition, a room description and a general description is included..

The work has been carried out in cooperation with the company Zenit Design in Malmö. The project's goal was to restore, improve and produce an ozone generator. During the project, the authors sought relevant literature in databases, been in contact with US suppliers of fuel cell membranes, Asian suppliers for the processing of Teflon and Titanium parts in mechanical engineering and Swedish suppliers of various standard components. The authors had access to a temporary lab at Zenit and electron microscope at Halmstad University where material tests were performed. The authors have also had access to measurement equipment to measure amounts of ozone.During the work, the authors have mapped how an existing ozone generator works and then have their own development.

The Hunter?s Bend project is about how our personal possessions affect our perceived identity and in what way the value of an object may increase with the relationship that is built up towards the user. I have looked upon traces of time as an extension of an existing object. The outcome is a series of leather cases made out of one piece of folded leather, hardened and locked within itself. The history contained in leather, as a living material has been an important part of the project as well as how its features are used in the making and then allowing the product to change after use..

In Sweden the residential and commercial sector is a major user of energy, why the Swedish government has set a specific goal to half the energy usage in buildings by 2050, compared to 1995. The Swedish Energy Agency has therefore started the campaign ?Halvera Mera? to encourage demonstration projects that will show how to renovate in an energy efficient way, and in doing so prove that it is possible to reduce a building?s energy usage by half and still make a profit. These projects are intended to serve as good examples and give inspiration to residential owners to perform energy efficient renovations. To make sure that these projects serve their purpose, it is important to know what will inspire and what will impede a residential owner to invest in energy efficiency improvements.

The goal with the project was to make the graphic for Djungeltrumman.se´s upcomingwebb-TV. Djungeltrumman.se is a clubguide on the internet and as a magazine.Their target group is people in the age between 18-34 with an interest for culture and nightlife that lives in a city where Djungeltrumman.se is active. The purpose of the project was to make a graphical frame that had the feelling ofDjungeltrumman.se. The feeling should capture the interest of the target group and make them care more for Djungeltrumman.se.The graphics will contain an intro, information frames and presentations for the different parts in the program. In this project I focused on making the intro for the program.

The aim of the present literature study was to define and describe the area ?compliance in veterinary medicine? (i.e. the way treatment recommendations are being performed) and discuss the factors that influence the level of compliance. Based on the findings, a model that intended to increase compliance in orthopedic postoperative rehabilitation of dogs was designed. In the daily work as a veterinary nurse it is essential that one provides the best possible care to the animals from the beginning to the end of the treatment.

This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.

This diploma work project is a product development project which purpose is to redesign a braking system for a walking frame. The system that was developed diverges the force from the user to braking power, and includes a service brake as well as a parking brake. The most important components of the system are a grip handle on where the user holds on to and a braking handle on which the user operates the brake from. The system also includes a power transmission component, braking package and other mechanical components. All of the components wasn?t developed in this project, several off them has been reused from the existing system.This product has been developed to meet the requirements and standards presented from the principal, Ahlberg Leber.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

HSB Göteborg owns and manages the property Masthugget 11:13 also called the Corvette in Gothenburg. The Corvette contains mostly office space but also shops, homes and garages. HSB Göteborg utilizes approximately 5000 square meters to its headquarters but in December 2014 they will move operations to Johanneberg Science Park. The risk of an increased proportion of vacancies in combination with relatively low rents and other tenant terminations allows HSB to ask for a future plan for how the real estate should be developed in order to remain profitable.Through studies of the area, urban office prospects, property current status and legal and economic conditions have different potential types of businesses been evaluated. City Planning Office program proposal forms the basis for the analysis of future plans for the area.

There have been several projects with solar installations in Sweden, and Sala-Heby Energi (SHE) wanted to create a solar plant. The question answered in this thesis is whether it is economically viable to create such a source of sustainable, renewable energy. The plant would be built with the help of the financial effort from 120 customers. This economic union would sell the electricity to the SHE, for SEK 4.50 per kWh up to a certain level over a period of 10 years. It would be a long term commitment to environmentally friendly electricity, using solar cells which convert sunlight directly into electricity.In year 2009 there was introduced a new state aid for photovoltaic systems, to create an increased and continuing interest in solar cells.

This Master thesis focuses on change conditions and change ambitions in Swedish public libraries. I have chosen to focus on three libraries that participated in a much-debated developmental project sponsored by the Swedish Arts Council almost twenty years ago. The aim of the project was to enhance service-quality, increase user-influence over media acquisition and library routines, and to redefine the concept of quality in the library context. I have made comparisons of the conditions and change ambitions between the project period 1991-1994 and present day 2009. To do this I have analyzed the evaluations of the above-mentioned project and the developmental plans that every municipality in Sweden is required to write according the library-law of 2004.

In industries today the demand for reading the state of industrial equipment and thus prevent machine breakdown, is increasing. The company HMS Industrial Networks AB has a product on the market, Netbiter EC350 that is used to read sensors and thus find out the condition of industrial equipment. By reporting scanned data to users through a cloud service, users can keep track of their equipment. When developing Netbiter EC350 a slot was made for a Bluetooth module to offer clients a wireless reading in future developments. In this project a prototype was made to show how this Bluetooth communication can be implemented. The goal of the project was to create a Bluetooth communication between a Bluetooth sensor and Netbiter EC350. A user interface was made to allow the user to read sensor values. The result of the project shows how a Bluetooth communication can be implemented to read sensors wireless and therefore it fulfills its purpose and goal.

I contacted the production company Salmonfox in the hope that they would have any projects that they needed help with. It showed that Salmonfox just started up an old project that they needed to complete. They wanted my help to edit some trailers and one crowdfundingfilm for the short film called, Captain Sweden (Kapten Sverige). Salmonfox are hopefully going to use the different trailers and crowdfundingfilm to promote the short film and get help with the funding to make a feature. The project began with a pilot study in which I made a time plan and a requirements plan, where the different requirements were set.

The thesis deals with packaging of real estate?s; an approach concerning tax benefits with the purpose to sell real estates in a more beneficial process than what is doable in direct sales. The proceeding can be beneficial because of the rules in Inkomstskattelagen (19999:1229) regarding underpriced transfers and selling of business related shares.  The real estate owner initiates the procedure through an establishment of an affiliate to a previously wholly owned parent company, where the real estate is the solitary asset of the affiliate. In order to fulfill the rules of underpriced transfers the transfer from the parent company shall be valued in regards to the tax value, else it will be taxed.