The purpose of this paper is to standardize and simplify the design work on a few specific types of storage brackets for balconies. The company Balco AB had the wish to simplify the design work in the preparation of attachments to their balcony structures. This would be done by a calculation matrix that could be produced which then in turn could be used for each new project by the company. The design work behind the development of these fittings at each new project is costly both in terms of time devoted by each calculation but also the cost of the time. The purpose of this report is that in a systematic manner, a calculation matrix can be created that then the company instead may follow from each new project.In carrying out the project used HILTI calculation program, which was provided by the company HILTI.

The aim of this project is to study the work that has been done by the youth welfare to prevent accidents and to increase the preparedness in case of fire. Further the aim is to develop a basis to improve the interaction between the fire services and the youth welfare. The conclusions that were made during the project can be used to increase the safety of the environment that estates by the youth welfare..

During the spring semester of 2009 I have participated in what was to become the project The Allotment Plot; a collaboration between the Swedish University of Agriculture and the Wanås Foundation. As one of six students in landscape architecture I have experienced a group based learning process with the point of departure in the designing of an organic and experimental kitchen garden at Wanås, a sculpture park for contemporary art. The project came out as neither us nor any other of the people engaged could have guessed. What was meant to be a garden turned out to become an entire cultivation movement. As students, we have gained a lot of experience through praxis; experience that will be valuable for our future profession. The project has also opened up the possibility to question and reflect upon what our profession and education could or should be about. This thesis focuses on the role of communication and the production of communicative tools in design processes and landscape architectural practice. It discusses how communication may be used in an exploratory and ?un-securing? way, and how this may dislocate the professional role, especially in situations where the design action, as in the case of this study, demands a high degree of transdisciplinarity and collaboration. .

A wastewater treatment plant has the task to refine the wastewater from substances that should not be released into the environment. The decomposition process can, in a simple way, be described as follows: micro-organisms breathe oxygen and eat unwanted substances. The environment in which the micro-organism lives is known as sludge and the correct amount of oxygen available in the sludge is important for the decomposition to be effective. The oxygenation of the sludge alone stands for about 30% of the plant?s energy consumption.

This master thesis covers the seasonal planning of a small scale hydropower system. The system in this study is owned and operated by Mälarenergi Vattenkraft AB. The total system consists of 4 different main rivers with 24 hydropower stations and several dams. The total installed power in the system is 43.75 MW. Most of the hydropower stations are regarded as small scale hydropower stations and thus entitled to green certificates.In this report the issue of planning is formulated as an optimization problem.

Our purpose with this qualitative study is to investigate how teachers experience their work situation, using Karasek and Theorell?s demand-, control- and support model. The study is based upon ten semi-structured interviews with gymnasium teachers. The interviews were transcribed and coded with three different themes; demand, control and support. We analyzed the results with Karasek and Theorell?s mentioned model.

This major project in Building Engineering has its focus on inquiring into what methods has been used in the planning process of the residential buildingLjusbojen 1. This project has been conducted in cooperation with Kadesjös Ingenjörsbyrå AB, an engineering contractor firm which also acts as the property developer. Initially several different general methods for planning residential buildings have been presented. After the methods from the process of building Ljusbojen 1 has been analyzed compared to the general methods presented in part 1. This shows what the determining factors are during the planning process; factors such as cost, quality, time management, know-how and environmental issues.

This work is a part of the project ?Våtmarker i odlingslandskapet ? uppföljning av miljömålen? (Wetlands in arable land ? following-up of the environmental goals). The main objective with this project is to study nitrogen and phosphorus retention in a constructed wetland by using mass balance calculations. Continuous measurements of nutrients and water flow through the inlet and the outlet of the wetland are made. However, substantial amounts of nitrogen and phosphorus were assumed to reach the wetland with a drain-pipe transporting wastewater from nearby houses (10 persons).

In 2009 The National Land Survey of Sweden, Lantmäteriet, commenced a project intended to provide a new digital elevation model (DEM) of Sweden. The method chosen for the project was airborne laser scanning (ALS). In addition to information about the land surface the project will also provide information about the forest, this as a by-product. This data can be used to estimate forest variables such as height and volume. The estimates are often more reliable than what is standard today. This study is based on interviews with employees and members of the forest owner association Södra in southern Sweden.

In industrial control systems PID-control remains the prevalent strategy, also for processes that would benefit from model based control. The purpose of this thesis is to evaluate whether model based control can be readily implemented in an industrial control system. To this end a simulated surge tank with a simulated industrial control system is studied. For evaluation two scenarios with specified objectives are selected.Following a review of LQR and versions of MPC, Predictive Functional Control (PFC) is considered the most suitable for implementation. PFC is a form of MPC developed with industrial applications in mind and therefore has several advantages for implementation in an industrial control system.

Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated.

This degree project was intendet to construct and design packaging for beauty care. At the requestof AssiDomän Frövi the project group were instructed to innovate creative packagesmade of their cardboard Frövi Bright.Three different packages have been developed. Two of them are for child care products and onepackage is for several bath products. These results show that there are possibilities to create creativeand different packages of the cardboard Frövi Bright.The report also enters deeply into the special qualities of Frövi Bright and studies of packagingdesign..

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.

This paper aims to explore the possibility of reading the Temple cleansing stories of John and Mark through Bruce J Malina?s honor/shame model, as E. Randolph Richards do. The analysis searches in John?s and Mark?s Temple cleansings for the presence of the notions of honor and shame, as Malina uses those concepts in his model.