Digital games are today avaliable on all kinds of different platform. Games and game thinking is also increasingly being applied within non-traditional contexts. This thesis explores the term "gamifiation" which can be defined as "the use of game design elements in non-game contexts". The purpose of the study was to identify and give perspective on the discourse surrounding the use and applicability of the term today. More specifically, it explores the possibilities of the potentially value creating ability in the context of work, and focused on the application of gamified software in the context of project work.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

The purpose of this two years master thesis is to examine the potential benefits of using bibliotherapy on elderly Finnish immigrants residing in Sweden and living in geriatric care. The basis of the study is a four week long bibliotherapeutic project implemented at a nursing home for Finnish-speaking people in Stockholm County.Participants were men and women spanning in age from 70 to 90 years old. Common for all the participants was that they had lived their entire adult life in Sweden, their only language was Finnish, and they had the diagnosis of dementia. The study examines the bibliotherapeutic model of Arleen McCarty Hynes and Mary Hynes-Berry, as well as Inger Eriksson?s approach for the use of bibliotherapy in nursing homes and hospices.The empirical analysis is based on field notes from the bibliotherapeutic sessions and from interviews with librarians and nurses involved in the project.

Edsbyverken Office Furniture has over the past 100 years been producing delicate carpentry products, chairs and skiis, but more recently the focus has shifted to furniture for the modern office environment. With a wide selection of products and its characteristic neutral design, Edsbyverken has an extensive group of clients both in Sweden and internationally. The aim of my C level thesis project was to examine the materials Edsbyverken is currently using in order to develop new designs or product functions. Simultanesously, I also wanted to verify whether the method I developed for this project - to initially undertake a comprehensive study of the chosen materials and thereafter specialise on a certain product and target audience ? was effective and successful.

This thesis is a feasibility study for a future product development project. The purpose ofthis project is to evaluate the possibilities and difficulties associated with the design of anelectric power assist servo for all terrain vehicles (ATVs). The project has been carriedout in collaboration with Nira Control AB. Nira designs and manufactures electric andelectro mechanic products mainly for the motor sport market segment.Nira Control AB is developing a fuel injection system for a new line of large ATVs oncommission. To be able to compete with manufacturers like Yamaha and Honda thecommissioner should be able to offer optional power assist steering.

AbstractIn this thesis we aim to extend the current theories about a concept called persona. A persona is a model of a user, mostly based on qualitative research and made with such accuracy that it to some extent can be used as a replacement of a real user in a development process and as a communicative tool. We will present a way of constructing this persona without meeting the actual users and follow up with interviews from the organization using them. This will lead to a model over the process of introducing personas as a concept in an organization,previously not familiar with the concept. The model is adapted to also work for projects and organizations where the concept is already known..

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

At the Department of Technology and Built environment at the University of Gävle there was an interest to study GNU Radio, which is an "open source radio project. The project is based on that most of the radio signal processing is made in an ordinary PC. The idea behind this degree project was that in a laptop there are several radio transmitters/receivers that takes space, generates heat and transmit in varied frequency band etcetera. All these radio transmitters/receivers could be replaced with a Software Defined Radio system. It means that one common, general radio hardware is used to different communications such as: WLAN, Bluetooth, GPRS, 3G etcetera. The waveform is generated in the software, which makes the system very flexible.

Compared to all existing ethnic groups in Sweden, the integration of Somali women has failed the most within the aspect of employment. This bachelor?s thesis investigates the obstacles in the integration of Somali women by focusing on one case, a project named ?Kvinnokraft?, partly financed by the European Socialfund.By interviewing eight key actors, opinions about obstacles in the project have been identified. A theoretical framework that incorporates integration, project research, multi-level governance and intersectionality contributes to explaining difficulties in integrating Somali women.The empirical findings show that there are individual, social and institutional holdbacks. Stereotypical perceptions were common amongst officials, which contributes to a creation of an inferior position in the structures of the society for Somali women.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

Context: During the 21st century several alarming reports have been published that deals with the depletion and pollutant of the earth by human interference. The earth is an ending resource and so are the mountains and bedrocks which are continuously mined in order to harvest its minerals. The idea behind Urban Mining is to (re)invent processes enabling further purpose for materials both from old deposits and new products providing secondary raw materials and energy. This thesis aims to investigate the challenges and opportunities of how firms and organizations can and will be able to strike a better balance between product-/service systems, economic growth and environmental stewardship in the context of Urban Mining as an approach. With the innovation of processes, technology, business- planning and creation in focus.Objective: How to future proof a business model for Urban Mining by the usage of business model design.Method: This thesis will be conducted using a case study approach, meaning that it will incorporate qualitative, exploratory and descriptive characteristics - aiming towards enabling both applied and fundamental research.Results: The result evaluates the business model element differences between traditional C&D industry and Urban Mining industry.

SMC is in the process of developing a micro simulation model. The existing micro simulation model developed at Cornell University for US data, CorSim, is one of the fundamental parts for the new micro simulation at SMC. To develop the Swedish model, Swedish data on all individuals in Sweden during 11 years are also available. These data are organized in a database. This paper describes the process of rebuilding the database to a more useful structure.

The main purpose with this thesis has been to study the design philosophy of Bruno Mathsson, how he worked with his houses and the landscape surrounding them and which kind of inspiration sources he had. My work started when I during the autumn 2004 got involved in an existing project related to one of his glass houses. The glass house is situated in Kosta and has during the last fifteen years suffered from so much vandalism and decay that it has become a problem for the municipality of Lessebo. The intentions are to restore the house and to transform it to a center for Swedish design, also containing a store and a café as well as hosting one apartment for scholarship students. My task in this project was to form and develop the outdoor environment in connection to the house.

SECO Tools manufactures tool inserts for all types of metal cutting machining. (Ti,W)C is a common raw material used in the production. At arrival, the material (Ti,W)C is always analyzed. Titanium has previously been analysed with x-ray fluorescence spectrometry, but as the calibration has previously been performed with two different types of titanium (rutile and metallic titanium), the results has differed. Because of that, this thesis project has been devoted to analyze titanium, to find the best titanium compound for producing standards.The work has been performed using literature studies and many experiments in the laboratories at SECO Tools inFagersta,Sweden.

This thesis evaluates the user board of the elememtary school in Veberöd, Sweden. In this process an evaluation model is developed. The model itself gets evaluated in a meta-evaluation to improve the model for future use.The starting point of the evaluation is the deliberative democracy theory. Although Sweden is a representative democracy an official desire exists to have a democracy with deliberative qualities. The evaluation model is constructed to fit this context and is therefore, not only, set out from classical goal-based evaluation but also from deliberative democratic evaluation.