This project started when LIC Audio AB wanted help with development of a hearing aid for public rooms. The problem is that a lot of people suffer from some sort of hearing impairment. In places with a lot of people and background noise the problem becomes bigger and the sound seems to flow together. During the project we found the solution for the problem in the shape of a headphone. The headphone receives a signal from a preinstalled hearing loop.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

The aim of this study is to examine whether the two factors SMB and HML in the Fama-French Three Factor Model proxy for default risk. The study is based on companies noted on the Stockholm Stock Exchange between 2003 and 2008. These companies are used to create the factors SMB and HML, as well as a default risk factor we call RMS. In a first set of regressions, we examine the explanatory power of the original Fama-French model on a set of portfolios consisting of Swedish companies of different size and book-to-market ratio. The default risk factor RMS is then added to the original Fama-French model.

The purpose of this paper was to analyse ?Identity- about trademarks, signs and symbols?. The project was a co-operation between the National museum of Art and Stockholm School of Economics in the spring of 2002, which consisted of an exhibition, a book and a series of seminars. The goal was to illustrate how the trademark had developed through history, which role it has in the modern society and how the trademark serves as a creator of identities. The project, mostly the exhibition, was exposed to criticism, which was directed towards the sponsorship deals between The National Museum of Art and five companies..

Eutrophication is a major problem in the Baltic Sea, as a result of increased loading of nitrogen and phosphorus. In the coastal parts of Östergötland the soil largely consists of clay and contains high levels of phosphorus bound to clay particles. Erosion of the soil in agricultural areas makes the water turbid and transports phosphorus to the Baltic Sea. The aim of this project was to examine the relationship between phosphorus and turbidity in the coastal streams of Östergötland. The aim was also to evaluate the possibility to use turbidity as a surrogate measure for phosphorus.

This thesis deals with an iterative user-centered IT-development project in a bank setting. The aim is to present a solution for deployment of future Internet banking for small businesses. The project features a design of IT-related concepts and ideas with a strong emphasis on scenario-based design and the usage of patterns as a documentation tool.The project plan featured an iterative framework and was carried out by a group of designers in collaboration with a reference group representing the future users of the system. This group consisted of company managers and bank employees, all from the small town of Åtvidaberg in Sweden.The method used in the development process was Scrum. A total of three sprints were completed with user meetings at the end of every sprint.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

The control of indoor temperature must be able to handle large time constants and both measureable disturbances like outdoor temperature, and non-measurable disturbances, like waste heat from appliances. Due to cheaper microcontrollers (small computers with designated tasks) with better performance, more advanced and computation-demanding methods for control can be used.In this thesis, Generalized Predictive Control (GPC) has been implemented and tested on a theoretically derived model of a house. GPC states that a model of the system is estimated in every sample, and the control is carried out simultaneously, based on predictions of the model. Disturbances like solar radiation can be estimated and used in the control as well. The control signals are determined by quadratic programming, which makes it possible to consider conditions, for example limitations on the control signals.GPC requires a number of parameters to be defined, like model order and control signal penalty, but is relatively robust for variations in them.

Bankruptcy is a problem for the society in form of high costs for including suppliers, customers, employees, investors, banks, insurance companies etc. The purpose of this study is to confirm or dismiss a bankruptcy prediction model that has been developed in a previous Swedish study, in order to predict bankruptcy with help of specific key figures. The model has only been tested in a larger perspective where the population consisted of all small firms in Sweden, in this study the model´s reliability is tested by that it instead been applied to a minor perspective, where the population only includes Stockholm. With a quantitative approach of 12 different key figures from a total of 60 Swedish smaller registered companies in Stockholm between the years 2005-2007, has been studied. The companies are divided into two groups, companies with good financial health and companies that have ended up in bankruptcy.The results shows that the model is applicable in a smaller population, but some of the key figures do not generate essential or any type of information about bankruptcy, but the majority of the key figures in the model did.

Abstract The purpose of this project is to develop a modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.

How do you reed a book? Do you start at the beginning,or do you begin with the end or maybe in the middle? Inmy exam project I elected to work with a photographicpublication about fragments of pictures combined in differentways, changing the context of the photographs andmaking the reader search for the whole picture, literary.During the project I tried to create a method for foldingwhich would make the pictures communicate differentlydepending on how they where stacked against each other.I wanted to explore new ways to read the photo book, andhow the format could be transformed by folding, to beable to show the pictures in a larger scale. Working withthe material from an earlier project about defragmentation,I wanted to create a book that would correspond tothis and figure out how it would work..

For a long time I have felt that there is a lack of time planning productson the market that attracts me to use them. Therefore I wantedto explore the possibilities of developing something that I reallywanted to use.At first I tried to come up with a more general tool for planningand structuring time, different from the products that are alreadyavailable. But soon I found it more interesting to see myself as theprimary user. This way I felt that I could experiment more and Ididn?t have to take things like production, cost and possible targetgroups into consideration.As I set out with an aim to try and understand my own problemswith planning and structuring time the project became a very personalone.

Nowadays the majority of the thinnings made in Swedish forests are done by machines, harvesters and forwarders. The most common model in thinning with a harvester is strip-road operated thinning and stand-operated thinning with one intermediate passage between the strip-roads. This study is a time study with some quality follow ups on a strip-road operated thinning model, a stand-operated thinning model with one intermediate passage between the strip-roads and a stand-operated thinning model with two intermediate passages between the strip-roads. The machines in the study were a small harvester (Forestline MPM C90) and a medium sized forwarder (Timberjack 1110). The study was made in Litsnäset outside the city of Östersund in Sweden and was made during the autumn 2007. In a lodgepole pine stand six study units (0,6 ha) were thinned with the three different models, two study units per model.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.