On the 13th of June 2005 the Minister of Defence, Leni Björklund, was subjected to a formal complaint addressed to the Committee on the Constitution concerning her handling of a specific co-operation project with France. The project concerned the development of a technology demonstrator for an UCAV called Neuron. The reason for the complaint was that the Minister of Defence had failed to present the project to the parliament and thus bypassed a parliamentary decision. Such negligence might be considered unlawful under the Swedish Constitution. The issue became public during an unscheduled meeting with the Committee on Defence, a meeting that was arranged at the request of the Minister of Defence.

This is a dissertation for a Bachelor Degree Project at the University of Skövde. The project is carried out in cooperation with the company Kinnarps AB.The objective of this project was to develop a new chair for café and lunch rooms, which should satisfy the markets expectations and demands and match Kinnarps AB?s assortment today. The project has contained everything from identification of user and customer needs and requirements to evaluation and building of a prototype.The result is a chair with a frame of tubular steel and there is nothing like it in Kinnarps AB?s assortment today.

The purpose of this project was to design an adjustable gutter bracket for Lindab Profil AB. Lindab currently manufacture a gutter bracket that is adjustable in angle, however, this model has some drawbacks.  One of it´s shortcomings is that it is somewhat difficult for the customer to mount.  Another problem with Lindab?s current model is that the design makes manufacturing unnecessarily complex. The new gutter bracket, that we have constructed, does not have these problems. It is adjustable for different roof pitches.

This report gives an overview of applications of the Greenroads rating system whichin turn is an environmental review system for roads. The focus of this report isapplications during the construction phase, ie on solutions which adhere to theentrepreneur's area of responsibility as opposed to the designer's. The study was undertaken in cooperation with Skanska (a global contractor andFortune 500 company) which provided a project suitable for an exemplatory study ofGreenroads. Please note that the project in particular was not specifically designedwith Greenroads in mind. Therefore and because of that the site provided anexcellent opportunity to study effects of application contra non-application. The approach of this study was to first review the system, thereafter to performinterviews with key personel at the site in different roles as to receive different viewsof selected points of application. Selected possibilities of application are cathegorizedand presented with comments and suggestions for adoption. Lastly Greenroads is briefly compared to the rating system which today is the mostwidely used by Skanska, LEED.

Indoor Energy is a company that works in the energy sector. It works through itsthree subsidiaries Indoor Energy Services, Indoor Energy Control and Indoor EnergyConsultants. Because of their comprehensive experience and offering of broad rangeof services they can contribute to integrated extensive solutions for their customers.Indoor Energy Control works with building management through control andregulation. This work is realigned by programmers and project managers. Working inthis area is complex and places a great demand on both technical innovation andprofessional project management.Due to the complexity of the work Indoor Energy Control has a hard time to get thenew employees to be independent in their work as a programmer.

The objective for this master?s thesis was to test and evaluate two methods for determining the content of tannin in a pinebarkextract. The methods used at Södra for this previously have not been specific enough, only the amount of polyphenolics have been measured. One of these methods is a test based on the Stiasny test and it determines the extracts ability to form a gel with formaldehyde. When this test was carried out it showed that the extract did not contain much tannin.

This degree project has been carried out by Oscar Adolfsson and Marcus Blomqvist, during the spring of 2010, both studying to become Bachelor of Science in Innovation and Design Engineering, at Karlstad University. The degree project includes 22,5 credits.The work is done on behalf of Etac Supply Center AB in Anderstorp. Etac is a company developing and manufacturing home health care products, with operation in Sweden, Norway, Denmark, England and Germany, and with sales worldwide. Bo Lindqvist, R & D manager has been the contact person at Etac.During the project the students has had a workplace at Semcon Caran AB in Karlstad. Semcon has also been helpful as a sounding board.The objective of the work has been developing a new, wall mounted shower chair, assigned for persons with difficulty to stand up while showering.Etacs requirement of the shower chair is that it should be able to support a user with a weight of 100 kg, the chair shouldn?t have any outrigger, optional should be armrests and backrest.

The purpose of my study is to examine why five primary school teachers chose to start using the method ?Learning reading by writing on computer? in their teaching. How do they perceive that the method works in their classroom and do they perceive that the method affect the children?s literacy?The study consists of a qualitative method in form of interviews with five primary school teachers and also some observations made by me in the classrooms. I will use the findings I made during the interviews and observations and contrast these to relevant literature and research that I have collected.The result of my study shows that all of the interviewed teachers had a self-interest in working with the method ?Learning reading by writing on computers? and that they also worked closely with colleagues.

The Degree Project is about ?creative packaging?, the group has in collaboration with AssiDomän Frövi planned, constructedand designed two packagingsolutions for chocolate creams.The group has worked with the cardboard Frövi Bright produced by the company itself, which together with differentaspects in marketing demands deep knowledge about the chosen material and productgroup.The knowledge wererecieved from education, litterature and personal contacts.The completed packagingsolutions will be exposed in connection with an exhibition this summer.The Degree Project has resulted in two new and completed packagingsolutions for chocolate creams. One is mainlycreative and the other one provides strenghtness with the chosen cardboard.Hopefully the result by the group represents AssiDomän Frövi in a pleasant way and increases the expectations forthe future..

In the middle of Australia there is a city called Alice Springs. The city has one of the highest amounts of daily sunshine hours and sun irradiation in the world. The Australian Government runs a project called Solar Cities, and Alice Springs is one of the participators. The main part of the goal with the Solar Cities project is to increase the amount of electricity generated by solar power and by doing that lower the impact on the environment. This thesis examines the possibilities for construction of a large scale solar power plant in Alice Springs. This is done to determine the potential of creating a more sustainable energy system in the city.

This is a product development project which has developed a prototype in order to facilitate for people using mobility devices when they want to buy a larger quantity of groceries. The prototype is a shopping cart composed with the upper part of a walker.Today there are many different types of mobility devices used by elderly and people with physical impairment. According to Myndigheten för samhällsskydd och beredskap (MSB) are accidental falls the most common cause of accidents in Sweden.This project has been using Computer Aided Design (CAD) as a tool to create a visual image of the prototype. The advantage of this is to modify the functionality and performance of the prototype on the computer before the modification takes place in the real model. Using human manikins, the CAD model was rendered in natural surroundings to get as true a picture as possible.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

This is a report written for an examination project C-level, on the subject of energy. The examination project is a product of the FVB Sweden AB (district heating bureau). It started with a meeting with Stefan Jonsson FVB Sweden AB, were he explained the content of the project, and from this a presentation of the problem was made. The problem that needed to be solved was how they could control the valves in the system to provide heating to everyone in the system. The valves are often oversized so the pump in the heating plant would have to be enormous to be able to provide enough flow to be sufficient, if everyone in the system had there valves fully opened. I came up with two solutions to the problem, one was a wireless network that could keep track of the valves and the other solution was an extra sensor that was placed on the radiator.

This thesis was conducted at Linköping University and SAAB Aerostructures, Linköping, and focuses on the automation of flexible fixturing in machining applications. At Linköping University a project called "Koofix" is conducted with support from Strategiska stiftelsen and several manufacturing industries including SAAB Aerostructures. The purpose of this project is to develop a more cost-effective, flexible, technique for fixation of workpieces during processing and assembly.Fixtures are an important part during the machining process, especially if you process the parts with high accuracy. Today a large number of fixtures are used at SAAB and they would prefer to reduce the number of fixtures by using flexible fixtures instead. SAAB uses one fixture for each article and this result in a high fixture cost and it also takes time to design and construct a new fixture.There are several advantages with using a flexible fixture such as that you can process workpieces with different length, height and thickness in the same fixture.

Most of my 16 students show a negative attitude towards mathematics and have difficulty understanding why they need mathematics to work as cooks. Their lack of knowledge has a negative effect on their work in the kitchen because they cannot master relatively simple mathematical solutions. The purpose of this study is to examine if an integrated working method of the subjects mathematics and cooking can change students? attitude towards mathematics and increase their understanding of the value of it in restaurant work. An integrated working method means to integrate the core subjects with programme specific subjects and that teaching is directed towards the main features of the vocational programme in order to create a holistic view.A theory of action research has been applied in this study, aiming to change something perceived as problematic through combining theory and practice in the cooking subject.