This major project in Building Engineering has its focus on inquiring into what methods has been used in the planning process of the residential buildingLjusbojen 1. This project has been conducted in cooperation with Kadesjös Ingenjörsbyrå AB, an engineering contractor firm which also acts as the property developer. Initially several different general methods for planning residential buildings have been presented. After the methods from the process of building Ljusbojen 1 has been analyzed compared to the general methods presented in part 1. This shows what the determining factors are during the planning process; factors such as cost, quality, time management, know-how and environmental issues.

Introduction/Background: Economic evaluations help decision-makers to make informed decisions regarding resource allocation. Information generated from CEA can support evaluations of a new intervention with current praxis. The evaluations also provide information as to whether an intervention is cost-effective, both in economic terms and in health gains. Objective: The aim of this thesis is to investigate the use of economic evaluations in public health, with a focus on CEA. Use of economic evaluations is regarded as both a method for evaluation and as support for informed decisions.

Background Calprotectin is a protein expressed in the cytoplasm inside the neutrophile granulocytes. During inflammatory bowel disease (IBD), the neutrophile granulocytes are involved in a complex interaction at the inflammatory area where they die and release their content into the intestinal lumen. Therefore, calprotectin in stool is a suitable marker for diagnosis and measurement of the disease-activity in patients with IBD. The most commonly used method to detect calprotectin in stool is ELISA, but the process of manual preparation of stool samples is time-consuming.Aim The objective of the study was to evaluate an extraction method that could replace manual preparation of fecal samples and to compare different methods for measuring Calprotectin in stool using two ELISA-methods from two manufacturers and one rapidtest.Methods For extraction of calprotectin from stool samples we used sample collector tubes from Epitope Diagnostics and fecal preparation kits from Roche. Two different ELISA-kits for measuring calprotectin concentration in stool were compared.

This is a master thesis from Uppsala University in collaboration with B Locket AB (more known as www.blocket.se). B Locket AB is a large ad-company from Sweden, located in Stockholm.Search engines on the market today are becoming more and more complex. When they were first introduced, they only had one function and that was to produce search results containing the string that the user had typed. Today, users want it to be able to spellcheck, produce more results and sort search results on specific fields as well. Preferably, all these features should not affect the performance as a whole.The reason to why these demands have come up is that users are getting more and more used to internet services as a whole and they want everything to be as easy as possible.The user ability has become a substantially more important area in the computer industry and this needs to be taken into account when it comes to B Locket AB and its search engine.

In today's society, the availability of energy plays an integral part in our everyday lives. Unfortunately, the price of energy in Sweden has increased in recent decades. A large part of our energy consumption goes to heating modules for houses, where heating methods that depend on energy sources such as electricity, district heating, fuel oil, gas and biofuels are the most common ones. During the winter period, the increase in energy costs becomes significantly evident, especially for small property owners. This increase in energy cost is most noticeable for home owners with electric heating.This thesis is written at the Halmstad University, in cooperation with a company, which makes parts of this thesis confidential.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated.

Organic Light Emitting Displays (OLEDs) are a new type of thin emissive displays predicted to possess superior properties to existing techniques e.g. Liquid Crystal Display (LCD). The main advantages are low power consumption and a thin display structure. This report contains an explanation of the emissive OLED technology, its functionality and the physics of the organic layer structure in an OLED. The technology is described with respect to the two classes of organic materials used in displays, small molecules and conjugated polymers.

This degree project was intendet to construct and design packaging for beauty care. At the requestof AssiDomän Frövi the project group were instructed to innovate creative packagesmade of their cardboard Frövi Bright.Three different packages have been developed. Two of them are for child care products and onepackage is for several bath products. These results show that there are possibilities to create creativeand different packages of the cardboard Frövi Bright.The report also enters deeply into the special qualities of Frövi Bright and studies of packagingdesign..

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.

When a person arrives at the emergency ward at the Uppsala University Hospital with his or her symptoms he or she explains the problems and then a priority process starts. The staff evaluate at which emergency level the patient is located in a model called Triage. The Triage model helps to decide the priority need and is based upon templates which point out in which of the 5 categories a patient is to be placed, to eliminate any future risk regarding his or her health. A lower triage level means lower priority but implies better health when the evaluation takes place. To obtain optimal effect of the Triage model the evaluation of symptoms must be reproducible so that patients with the same symptoms are placed at the same triage level regardless of whom among the staff conducts the evaluation. The purpose of the study was to see if the resources are allocated based on priority level of the patients.

Växjö University, School of Social SciencesBachelor ThesisTitel: Minijob ? en tysk arbetsmarknadspolitisk åtgärdAuthor: Hanna PeterssonSupervisor: Lennart BergfeldtI?ve made a descriptional evaluation of the tax-free low-income action from Germany, Minijob. If the employees earns maximum 400 ? a month they don?t have to pay any tax. The employer pays an employer?s fee of 30 %.

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.

In our thesis we investigate how public libraries are working with external marketing via social media. The study aims to found out what the reasons are and how public libraries are using social media to market themselves. Furthermore, how they evaluate the success of these marketing efforts. We limit ourselves to public libraries and its staff. The theory that we have chosen to use to analyze our data is the marketing mix of the 4 P'S (product, place, price and promotion), but we have replaced the ?price? with ?staff? because ?staff? is more relevant for library management.

I have been inspired by the Do It Yourself movement. DIY builds on the creativity of the individual, one?s capacity for initiative and one?s desire to realise one?s ideas. I have been inspired by sheets of pattern paper used in the manufacture of clothing, and my line of furniture is based on two-dimensional patterns of furniture. The sections of the pieces of furniture are printed on and relate to a standard sheet of plywood.

This project includes a small study of Västerås city's housing needs, and a proposal on theuse of the property 1:207, Lantmännens silo in the Eastern Harbour, Västerås.The project intends to produce a basic study of the useful systems for this rebuilding projectwith regards to sustainable development and energy saving light buildings.The end result, which consists of a detailed visualization of the proposal, intends to becomean iconic natural focus for the Eastern port of Västerås and an example of the use andadaptation of existing structures.The property must also link the eastern parts of Västerås with the center through anextension of Mälarleden.The work has been performed through literature studies, site visits, contacts with the City ofVästerås and by calculations.The proposal consists of architectural proposals drawings and visualizations.Furthermore, a suggestion is given of how the property can be used and fitted into theoverall plan for urban density development currently underway in the city of Västerås.Computer programs used have been Microsoft Office Excel, AutoCAD and ArchiCAD..