At SLU, Divison of Reproduction, Dept of Clinical Science, there is an ongoing project on the development and evaluation of new methods for the assessment of stallion semen quality. This EEF-study, which is a part of that larger project, has focused on the effects on motility and fertility of stallion semen of two different extenders and selection. Both an objective method and a subjective method for analysis have been used and compared in the study. The increase in the use of artificial insemination with cooled semen in Swedish horse breeding over the last decade is thought to play a part in declining foaling rates (Kareskoski et al, 2006, Kuisma et al, 2006). This calls for better evaluation methods of semen quality since cooling and transportation put higher demands on semen quality in order to maintain fertility (Aurich, 2005).

The aim of this project was to develop educational resources concerning bioenergy and sustainability. The initial purpose was to produce two sets of material: one suitable for children in their first years of Swedish compulsory school, and one designed for upper secondary students. In the report, however, the possibilities are discussed for this material to be used with even wider audiences.In the first phase of the process, literature (books, reports etc.) with relevance to bioenergy, sustainability and theories of learning were studied. This insight, along with the appropriate course curriculums, was used in the development stage to produce learning material for the targeted audiences. The development was followed by tests and evaluations carried out with high school students, upon which an analytical discussion is held regarding the consequences and possibilities that the results of this project pose.The content of the learning material is based on the curriculum and course requirements provided by Skolverket (The Swedish National Agency for Education) for lower elementary and high school students.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

Electrolux Laundry Systems is the world leader in manufacturing professional laundry equipment.The machines are used in the hotel sector, elderly care, in multifamily houses, laundry bars, and incommercial and institutional laundries.If there is oil or grease left in the clothes after washing may the heat from the dryer cause a chemicalreaction. This reaction may, under certain circumstances cause a fire inside the drum. Competitors toElectrolux has developed its own systems that extinguishes fire inside a tumble dryer and customershave expressed desire to purchase a fire-extinguishing system. Therefore, the project team receivedthe task by Electrolux to develop a fire-extinguishing system that extinguishes a fire in a tumbledryer.The purpose of the project has been to develop a system that both detects and responds to fire in anindustrial tumble dryer to meet the competitors and to satisfy customers' requirements.The goal was to develop a fire-extinguishing system for Electrolux Laundry Systems and develop afully functioning prototype.The project began with information searches on a variety of methods to both detect and extinguish afire. Subsequently, a number of different methods were used to develop a final solution and make aprototype.The result of the project is a fire-extinguishing system that extinguishes a fire inside a dryer.

Research is a time-consuming endeavor which requires appropriate tools to manage often vast amounts of information. Militarization 2.0 is a research project aiming to explore Militarization in social media. The aim of this project is to design a user interface for supporting researchers in projects involving large amounts of data in qualitative studies. The project will follow the design process of the first version of the Militarization 2.0 research database interface. The design process involves user studies, interviews and design and testing of paper and digital prototypes.

In 1998 the Swedish Socialist Government initiated a project in order to promote economic growth and to end the discriminating social and ethnic segregation in the greater city regions of Stockholm, Gothenburg and Malmo. One of the goals of the project was and still is to promote political participation in 24 of the poorest areas of the three cities. In a quantitative analysis I evaluate whether or not the project so far has been successful in promoting a specific part of political participation, i.e. electoral participation in communal elections. The results of the 24 poor city areas are compared with a group of 14 likewise poor city areas of major swedish cities.According to my hypothesis, general improvements of the socio-economic status of poor city areas ought to generate positive effects on electoral participation in communal elections.

The actual project presents the development of a testing rig for a steam engine. A short overviewabout the development of steam engines is presented, until arriving to the development of thepresent engine, which will require to be tested in different ways.The testing rig studied on this project (based on a Lanchester engine) will be used to testdifferent materials and layouts for the group Piston-Cylinder.The engine is a high performance steam power engine, which is going to have a highpower/dimensions ratio, what will lead to require high performance components and materials.An introduction to the testing rig is presented, and the entire design project is done in order toreplace the disappeared documentation of the current testing rig, built on the 1970?s. Also somemodifications done in the original testing rig are presented, as well as some detected problemsand their possible solutions..

The objective of this project was to develop an application for mobile phones using the Android operating system. The main goal was, with the help of GPS, to pinpoint locations, measure distance traveled and illustrate the progress on a map. Functionalities for just showing the map, fetching addresses and saving to a database was also implemented. The result of the work was a proper application, called MeasureApp, that fulfills the goals set in the planning stages of the project. MeasureApp can be used to measure distances where accuracy is not a main factor, i.e walks or runs.

The main purpose of this Master´s thesis, is to describe and discuss what constitutes the library collaboration between The Swedish Royal Library and the National Library of Guatemala, but also to analyse which effects the support has for public library work in Guatemala. The data consists of interviews and direct-observations during 2 months of fieldwork in Guatemala, Central America. The analysis is based on literature studies combined with the answers from the respondents and other results from the field work. We have found above all three factors to be of importance in the constitution of the collaboration between the National Library in Guatemala and the Swedish Royal Library: the Swedish library discourse, the Swedish aid discourse and the relationship between the people involved with the project. The library discourse in Sweden and in Guatemala emphasizes different aspects of the work.

A common assumption in marketing is the wider variety of product a corporation has, the better for the consumer: more product - more choices. Companies often develop a line extension to broaden consumer range through product attributes including quality, function and design. These developed attributes within the product are not always optimal for the consumer. As a result, companies often become entangled in having a price higher than the cost and benefit of the products. This essay aims to analyze the consumer value of line extension products and how these evaluations relate to extended line product pricing.

This report deals with activities that from a CSR perspective are considered to create a shared value for a medium-sized construction company in Sweden. The CSR definition used in the report is the European Commission?s since it reflects the valuecreating aspects of CSR, in contrast to the traditional philanthropic aspect of CSR.Companies in the building construction industry have difficulties identifying activities that create value in society and in the company. The aim with the project is to, from a CSR perspective, identify and evaluate value creating activities in a building construction company. The activities will be evaluated with respect to competitiveness and how they can be implemented into an organization.

This is the final documentation of the basis that can be the foundation of how to solve theproblem with leaking hydraulic oil in a shoe press at the company Albany InternationalAB in Halmstad, Sweden.The project has been performed at Halmstad University as a degree project commissionedby Albany International AB. The purpose of the degree project was to find a way ofdetecting the hydraulic leak of a shoe press. The reason is that the shoe press runsunattended during nights and weekends, this can cause an extensive decontaminationwork and production stop if leak. The hydraulic oil could be leaking in large amounts orslowly as a fine mist. The development of a working system that can detect a hydraulicoil leak and stop the machine before a large amount of hydraulic oil leaks out wouldconsiderably reduce the cost of the decontamination work.

This project was initiated by a veterinarian, that at stallion performance tests for breeding during a number of years, noted breed differences in various types of testicular disorders. Therefore it was of interests to examine the proportion of testicular disorders within certain breeds. The aim with the project was in a first part to study cryptorchidism in common horse breeds in Sweden. Information about castrations of stallions performed during a 10 year period (2000-2009) was collected from computerized case records at five animal hospitals. The case records showed the numbers of castrations, normal cases and cases preformed on stallions with cryptorchidism, abdominal respectively inguinal.

Many IT projects that have been developed in recent years are often considered to be unsuccessful. According to a study by Exido up to the 72% of all IT projects are considered to be failed. A failed IT projects means that the organizations that have ordered the new system may have higher costs or/and the system will not be ready in time. If costs are too high the new system might not be installed in the organization or if the system is not completed within the specified time frame the organization can become stagnant.In this paper we conduct an investigation of the failure of IT projects there we will examine where, in the systems development lifecycle four different phases, projects fail. We will conduct an empirical study of each phase, where we describe the key steps in the process; we will also investigate failed IT projects that are linked to the current phase.

This project has created a web-application for the service technicians at the paper plant Gruvön. The project was outsourced to the IT-company Sogeti.The application visualizes information about reparation-work of the equipment at the paper plant. The displayed information is work-orders, the status of the work-orders and errors. It is also possible to see the costs and hours spent on reparation-work.. The work-orders and related information is stored in a relational database.The application is created mainly for web-browsers in mobile-phones and tablets.