This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

This report deal with grades and evaluation in intermediary school, which grading systemshas been and is used in intermediary school and their benefits and disadvantages. The purposewith this report is to find out how the different grading systems has functioned since thebeginning of the Swedish intermediary school to present day and speculate what the futurewill show considering the changes the Swedish school in general is facing. My main result isthat the literature and the teachers, both retired and active, share the same view regarding thepros and cons with grading. When it comes to the matter of in which class should initiate, allthe approached teachers has different opinions. The procedure which I used to get my resultsincludes a literature analysis about grading and evaluation, covering both printed andelectronic sources, where I have compared the views of the different scholars.

This thesis has been carried out at the Department of Urban and Rural Development at SLU Ultuna during the spring semester 2009. The topic of the paper is how energy consumption can be influenced through design and if the conditions for good design decreases when solutions based on energy efficiency are used. The report is divided into one literature study and one part where energy efficient solutions are used in a design. The thesis work has its origin in a project called "Energihus i Uppsala." The planned building will be a center for energy research in Uppsala. The project aims to demonstrate to the public what is currently happening in research related to energy.

E-Series 450 is a chainsaw designed by Husqvarna AB to the semi-professional user. Husqvarna is a world leader when it comes to chainsaws, trimmers, lawn mowers and garden tractors. The problem in hand can be addressed by the question. ?How easy can we start a chainsaw? The purposehas been to provide a solution to the question above and give Husqvarna a good base of which they can continue towards a finished product.

Course: Master's Thesis in Business AdministrationPurpose: The purpose with this paper is to give an insight, and to compare, the project management of two IT-projects ? one which product was implemented and put into use, and one, which was implemented but no longer exists on the market. Furthermore also examine the critical success factors that influence the success respectively the failure of the IT-projects. Method: To attain the purpose with our study we have chosen a qualitative method. We have carried out interviews with two of the project managers of the IT-project of the two large companies.Result: A couple of problems occurred within the IT-projects of the large companies.

ABSTRACTThis paper aims to shed light to what extent a financier have learnt about sustainableorganizational change, through development projects taking part in the Swedish knowledgeFoundations program, ICT in Teacher?s training. Some questions asked were: Has theSwedish Knowledge Foundation learnt by researchers? and self evaluation?s ?stirring up? ofongoing projects? What type of learning process has been going on? Has new, mutual,knowledge been constructed or has already existing knowledge been transferred?The study consists of one participating observation and three interviews. They showhow the financed projects have been ?stirred up? so that a developmental learning process hasstarted within their organization.

The aim of this qualitative study was to give an deeper understanding of how employees in the engineering industry experienced health education and how they understood and gave meaning to the terms health and health education. The study was based on interviews with eight men and women who participated in a health education project which had been held on their workplace. When the study took place the interviewees were in the age between 28 and 58 years. The results indicate that the employees understood health as a combination of both physical and psychological factors. The positive aspects described by the interviewees based on their experiences from the project were increase physical activities and that the project had helped them to get a better diet.

Background and Problem discussion: Strategic evaluations are important as they providecrucial information regarding Swedish development assistance and recommendations on howto face problems and inadequacies found in the evaluations. Therefore, the follow up ofrecommendations is of great significance as well. Unfortunately, SIDA?s ManagementResponse system for follow-up of strategic evaluations has not been functioning in asatisfying way and needed actions have not been taken. Thus, Swedish developmentassistance has been criticised for the lack of implemented actions and the public has startedto question the work carried through by the organisations.

This report summarizes a Bachelor Degree Project in Integrated Product Development,carried out during the spring semester in 2007 by three students at the Product Design Engineering programme at the University of Skövde. The project was performed as an assignment for KinBag ab, a sister subsidiary to Kinnegrip ab in Lidköping, who develop,manufacture and market the golf bag KinBag, a bag with an integrated wheel carriage system. The purpose of the project was to redesign the golf bag to attract a target group consisting of golfers aged between 20 and 40.The layout of the project was as follows: The project began with a feasibility study where different problems were identified with the basis of a market research which eventually was summarized in a dynamic specification of requirements. The feasibility study was followed by a generation of ideas which contained everything from sketches to simple mock-ups with an intensive amount of thoughtful brainwork and information gathering in between. This ledto the development of a number of design concepts, both on an overall level and on different parts of the golf bag.

This project details the process of converting and transferring a turn-based paper prototype to a digital real-time format. The projects goals were to see how well the original feeling could be transferred to real-time and how the transition itself went. The project have been completed with the help of the programmer Mikael Gullberg. The practical part of the project was executed between the dates of 25/4 ? 2/5.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

In recent years, several problems in the field of assistive device have been lifted. To manage the development Beslutsstöd (Decision support) has emerged as a systematic working method. Beslutsstöd is designed as a guideline and serves as a tool for physical therapists and occupational therapists in the prescription process of assistive devices. Beslutsstöd thereby aims to improve the quality and effectiveness of the prescribing process of assistive device in the organization of the municipalities. An implementation evaluation about how the implementation of Beslutsstöd in the municipalities did proceed has not been done.

The aim with this thesis is to study the risk management in construction projects at the Swedish Road Administration, SRA. Furthermore, the aim is to find the effects of the risk management. The theorem of this thesis is that the positive effects of the risk management in construction projects create additional value to the project. These additional values are that the project itself becomes resilient and that the project goals are achieved without any significant disturbances.This thesis shows that the risk management in construction projects do not follow the guidelines set out by the SRA. This is due to a lack of education in the method and a difficult method all together.

This study is about conception in the evaluation of financial assistance within the social services. The aim of this study is to describe and understand how social workers reason about variation, conception and local norms and its significance in the evaluation process. To reach this purpose we have conducted semi-structured interviews with eight social workers in which different themes were discussed and reasoned about. In order to understand and analyze our results we have studied/used the knowledge about tacit knowledge and street-level bureaucracy. Our results showed, as previous research states, that social workers do have conceptions about clients.

This paper aims to examine performance monitoring in project organisations. The number of organisations that regularly performs projects as a key part of their operations grows rapidly, why this topic has become of large interest. Through a theoretical framework developed by Lars Östman in 1977, the performance monitoring system of the Swedish government-owned public utility Svenska Kraftnät is studied closely. The results from this analysis are then linked to an analysis of the organisation's internal structure through Mintzbergs generic organisational structures. Close connections are found between organisational structure and performance monitoring, which leads on to interesting observations about the connection between size of a project organisation and choice of monitoring method..