Saab Aerosystems have had one dominating product, JAS 39 Gripen, and one dominating customer, FMV, for a long time. The operations management system at Aerosystems is adjusted for development of Gripen and as the business unit is trying to enter new markets with other products and customer the operations needs to be adjusted to fit the development and manufacturing of these products as well.The purpose of the master thesis has been to investigate how Aerosystems is managing requirements on operations from external customers and how to make improvements within this area. The aim has been to carry out a situation analysis to identify where improvements are possible and then produce proposals for improvements through studies of literature and other business units. The thesis also include a study of knowledge transfer within the business unit to investigate how this can be applied to improve the managing of requirement on the operations.An extensive interview study has been carried out in which interviews mainly have been conducted with employees at Aerosystems, but also at Saab Avitronics and Saab Aerostructures. The reason why these business units have been examined is because they have carried out a large number of successful businesses with external customers, which also are potential customers for Aerosystems in the future.The interviews have been analysed to identify strengths, weaknesses, opportunities and threats with the present way of working.

This report is the documentation of a project in the education Master of Science in Mechanical Engineering. The project was carried out at Alfakonsult AB. The purpose of the project was to map out the transference of information between the different operators in the supply chain of medicine in Sweden and to analyse this in order to reduce lead-time and the total throughputtime. The supply chain of medicine in Sweden consists of producers, distributors, one wholesaler, prescribers and patients. The mapping of the transference of information showed that most operators in the supply chain have done well introducing technical aids to facilitate the transference of information.

Skanska 21 is a student program for university students. The program runs for a year and a half parallel to university studies. It is aimed at those studying a few specific master engineering programs at Lund University, Royal Institute of Technology (KTH), Chalmers University of Technology or Luleå University of Technology. The program consists of a number of program meetings such as company presentations, a boarding school week, rhetoric training and project visits. The aim of the project is to evaluate the Skanska 21 student program.

This thesis is a product development project that was performed at Alfa Laval Tumba AB. In the past Alfa Laval have manufactured gas separators for engines where gas flows were cleaned from oil. A new business area for this kind of technology has shown to be the manufacturing industry where oil mist has to be separated from the vented air. Therefore a new and bigger design is needed to be able to handle the greater gas flows. A product like that would be a strong competitor on the market when the maintenance would be low in comparison to today?s equipment.During the project several concept suggestions were developed using customer interviews and research as input.

Traditionally, the majority of Swedish public libraries have carried out most of their acquisitions through Bibliotekstjänst's binding booklets. In recent years, however, many libraries have complemented the binding booklets and other services from Bibliotekstjänst by other ways of acquiring books, such as Internet bookshops, while other libraries have stopped using the binding booklets altogether. There are various reasons for this development, such as Information Technology making it possible for librarians to compare prizes and services from different retailers. Another important reason is the need for public libraries to meet new needs from their patrons, while remaining on a restrained budget, which often causes a need for reorganization of staff and resources.As a way of meeting the new needs for libraries, Bibliotekstjänst has created Profile Services (profiltjänster), a service in which a library outsources its acquisitions to Bibliotekstjänst. The staff of the library, in dialogue with Bibliotekstjänst, design a profile for the acquisitions for the library in question, in order to determinate which types and genres of literature the library and its patrons are requesting.

The aim of this thesis is to study discursive change in the Swedish environmental political discourse between 1987-2005. The text of three Swedish budget propositions are analysed for this purpose.The results from the analysis are related to a few relevant theoretical perspectives that hold partly different views on what constitutes ?sustainable development? and ?ecological modernization?. Through these theories the thesis continues the discussion around the two central but somewhat blurry terms sustainable development and ecological modernization. The aim of this discussion is to conclude whether the discursive change in Swedish environmental politics can be said to go more in the direction of sustainable development or ecological modernization, or if elements of both perspectives can be found.The analysis shows that the Swedish environmental discourse has come to include more and more political fields such as general welfare politics, during the period.

Water is vital for all life on earth. But it can also be dangerous, even fatal, if it is polluted water. 60 percent of child mortality can directly be deduced to dirty water. Not only developing countries are affected, even in the western world epidemics are breaking out by partake or bathing in dirty/polluted water.MIP, Molecularly Imprinted Polymers, is a biosensor technology that can provide faster and more reliable response than the current methods of water analysis. It is also cheaper and due to that more samples can be taken and analyzed.

This degree project was conducted in collaboration with Gremo AB located in Ätran.The aim of the project was to develop a solution to secure quality and to help assemblingthe locknut holding the vertical hinge on the harvesters and foresters from Gremo.At this time the nut is assembled manually by the aid of an overhead crane. The nut istightened differently from time to time, and there was no specified torque to which it istightened. Another present problem was the locking washer which sometimes getsdamaged during assembly, when this happens the procedure has to be started over fromthe beginning. The current assembly procedure is very time consuming and lengthy forthe employees.Our task was to design a machine that could tighten the nut to a specified torque with amargin of error of ± 3%. The assembly procedure will be held simple and the timerequired at a minimum.The project started by developing several principle solutions, the one solution that bestmatched our specifications were developed to a primary solution.Today we have started manufacturing and assembling our prototype.

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

This term project addresses how to develop construction drawings for a general contract. The project contains supervision, including blue prints as support as needed.Apart from directions on how to carry out the actual work, the supervision also discusses regulations governing all construction drawings. The supervision is created as guide for similar projects.The construction drawings is a complete construction guide, hence it includes all construction drawings. In addition, a room description and a general description is included..

This study has been carried out as a part of the EC funded project, SMARTDOC IST-2000-28137, with the objective of developing application components that provide highly interactive visualization and collaboration functionalities. The low-level components from the graphics library AVS OpenViz 2.0 are used as the development basis. The application components can be inserted into electronic documents that allow embedded controls such as web documents or Microsoft Word or PowerPoint documents. Instead of displaying results as static images, a SMARTDOC component provides the ability to visualize data and interact with it inside the document. Although the principal goal of the SMARTDOC project is to create components in a number of different application domains this study concentrates on developing a medical imaging application component in collaboration with the project partners AETmed and professor Alan Jackson at the University of Manchester.

The Hunter?s Bend project is about how our personal possessions affect our perceived identity and in what way the value of an object may increase with the relationship that is built up towards the user. I have looked upon traces of time as an extension of an existing object. The outcome is a series of leather cases made out of one piece of folded leather, hardened and locked within itself. The history contained in leather, as a living material has been an important part of the project as well as how its features are used in the making and then allowing the product to change after use..

The goal with the project was to make the graphic for Djungeltrumman.se´s upcomingwebb-TV. Djungeltrumman.se is a clubguide on the internet and as a magazine.Their target group is people in the age between 18-34 with an interest for culture and nightlife that lives in a city where Djungeltrumman.se is active. The purpose of the project was to make a graphical frame that had the feelling ofDjungeltrumman.se. The feeling should capture the interest of the target group and make them care more for Djungeltrumman.se.The graphics will contain an intro, information frames and presentations for the different parts in the program. In this project I focused on making the intro for the program.

This study aim to investigate the conditions framing the professional development situation for physical education teachers (PE) in a small municipality in the south of Sweden. The Swedish National Agency for Education declare that "focus must be directed towards strengthening the teachers' profession", and that "schools need well-trained teachers and good teaching to help students achieve good results". The study focuses both the schools? contribution and the way in which the teachers take own initiative and are motivated to develop their professional skills. The investigation is all based on teachers' perspectives.

Where is technology heading? And how will our behaviors towards these new innovations look? This project questions the direction of ?beyond smart? products, through scenarios within our everyday life. The work is both critical and speculative. Speculative in the sense that it is speculating in how a future scenario with ?beyond smart? products would look like.