In this project a washing station has been constructed for Albany International AB. At present, there is no existing system to clean the dirty pipes that are coming back to the company.The work followed the product development process, and it started with the requirements list. This was followed by brainstorming, evaluation and completion.The result was a concept for de present time and one concept for the future.The present concept is intended to be built immediately. This is an adjustable bench with sliding bearings to facilitate the work. The actual cleaning is done with a high pressure washer that uses hot water.

Electrolux Laundry Systems is the world leader in manufacturing professional laundry equipment.The machines are used in the hotel sector, elderly care, in multifamily houses, laundry bars, and incommercial and institutional laundries.If there is oil or grease left in the clothes after washing may the heat from the dryer cause a chemicalreaction. This reaction may, under certain circumstances cause a fire inside the drum. Competitors toElectrolux has developed its own systems that extinguishes fire inside a tumble dryer and customershave expressed desire to purchase a fire-extinguishing system. Therefore, the project team receivedthe task by Electrolux to develop a fire-extinguishing system that extinguishes a fire in a tumbledryer.The purpose of the project has been to develop a system that both detects and responds to fire in anindustrial tumble dryer to meet the competitors and to satisfy customers' requirements.The goal was to develop a fire-extinguishing system for Electrolux Laundry Systems and develop afully functioning prototype.The project began with information searches on a variety of methods to both detect and extinguish afire. Subsequently, a number of different methods were used to develop a final solution and make aprototype.The result of the project is a fire-extinguishing system that extinguishes a fire inside a dryer.

IKEA HaparandaTornio employ some two-hundred people in its furniture retail store.Keeping track of staff statistics and employee information has previously been achievedthrough the use of a basic Microsoft Office Excel spreadsheet. The store?s human resourcesdepartment requested an upgrade to this system with the hope of speeding up andsimplifying the administrative process, as well as to make it easier to monitor HR-relatedtarget statistics. The following report documents the development process of that upgrade ascarried out by the author. The project draws on research in usability design and cognitivepsychology to develop a user-friendly interface.

Research is a time-consuming endeavor which requires appropriate tools to manage often vast amounts of information. Militarization 2.0 is a research project aiming to explore Militarization in social media. The aim of this project is to design a user interface for supporting researchers in projects involving large amounts of data in qualitative studies. The project will follow the design process of the first version of the Militarization 2.0 research database interface. The design process involves user studies, interviews and design and testing of paper and digital prototypes.

In 1998 the Swedish Socialist Government initiated a project in order to promote economic growth and to end the discriminating social and ethnic segregation in the greater city regions of Stockholm, Gothenburg and Malmo. One of the goals of the project was and still is to promote political participation in 24 of the poorest areas of the three cities. In a quantitative analysis I evaluate whether or not the project so far has been successful in promoting a specific part of political participation, i.e. electoral participation in communal elections. The results of the 24 poor city areas are compared with a group of 14 likewise poor city areas of major swedish cities.According to my hypothesis, general improvements of the socio-economic status of poor city areas ought to generate positive effects on electoral participation in communal elections.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop functionality.

3D modeling is a common tool in landscape architecture. Today, there have been new ways in which virtual 3D models are successful tools in the dialogue with the public. These new methods involve children and young people who are groups that is hard to reach and engage in citizen dialogues. The purpose of this work was to investigate how a virtual 3D model works in the landscape architect?s communication with the public through the project Gruvstadsparken in Kiruna. Through workshops, I wanted to communicate Gruvstadsparken to get ideas from participants on how the park can be used and be revisited.

Fusarium head blight is a large problem world wide which reduces the yields and the quality of small grains. Shrunken kernels with decreased thousand kernel weight as an effect and pro-duction of mycotoxins are some of the problems caused by infection of Fusarium spp. To avoid toxin contaminated bulks to enter the food and feed chain it is important to have tools for prediction and analysis of the fungi and toxins. Good prediction methods are also impor-tant in the breeding industry since early identification in trials of lines with high resistance or susceptibility simplify the work. To compare different techniques for these objectives this project was initiated.

High technology companies in Sweden spend a huge amount of money on research and product development in proportion to what they get back in earnings from their inventions. Product development has traditionally been regarded as much more important than business development. This thesis aims to point out the critical factors behind successful business development processes for high technology companies. We have chosen to make a case study of Hexagon, a highly successful and innovative company within the measurement technology business. Internal and external actors that are important for business development have been identified and interviewed in order to understand how ideas are developed and executed.

This project has created a web-application for the service technicians at the paper plant Gruvön. The project was outsourced to the IT-company Sogeti.The application visualizes information about reparation-work of the equipment at the paper plant. The displayed information is work-orders, the status of the work-orders and errors. It is also possible to see the costs and hours spent on reparation-work.. The work-orders and related information is stored in a relational database.The application is created mainly for web-browsers in mobile-phones and tablets.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

In theory, the logic behind partnerships is simple: All organisations have strengths, but no organisation has all the strength required to do everything. Triggered by global perspectives and challenged by sustainability objectives, the United Nations Conference on Environment and Development (UNCED) in Rio de Janeiro in 1992 pointed out needs for corporate responsibility. In this conference, Private-public partnership, PPP, was identified as a potential way to work towards sustainability, especially as a way to emphasize a corporate responsibility commitment. Nowadays, organizations exist to satisfy the needs and interests of all their stakeholders, such as customers, markets, shareholders, as well as secondary stakeholders such as media, NGOs, and society at large. Addressing all stakeholders and working towards a sustainable business development makes PPP a potential solution, but also a source of challenges.

In Sweden and in the rest of the world we face the problem how to create a sustainable development. At the same time the Swedish million program, a housing program made in the 1960:s and 1970:s, is facing a renewal due to lack of maintenance during many years. An attempt to join these two interests has been made in the residential area of Gårdsten north of Gothenburg. This paper is a case study to review the project and its approach to the sustainability concept. The purpose is to spread knowledge about the problems that can arise. By studying documentation about the reconstruction I have analyzed the approach that has been used. The housing company?s starting point was user participation and an intention to make the changes visible.

This report covers a product development project conducted as Bachelor of Science thesis forthe Innovation & design engineer program at Karlstad University.The assignment was supplied by MMB Consulting, Kristinehamn. The purpose of this projectwas to find an alternative way of shaping wire-net insulation mats. This insulation product isused for fire and thermal insulation of technical installations. The insulation consists of stoneor glass wool with a sewn on steel wire netting on the out facing side. This netting has thepurpose to enable fastening to e.g.

With a starting point in a project for reinforcing small scale business among immigrants in Sweden, carried out within Swedish for immigrants (sfi), the aim for this thesis is to examine the project from the view and experiences of the participants. Interviews with participants in the project have been inspired by the teoretical and methodological views of Grounded Theory.The interviews show that some participants want to start their own business, but almost as many don?t have that dream. The former group all have experience of being self-employed. They are aware of the difficulties but are nevertheless determined to proceed their dream.