An inquiring study of literature has been conducted, about the human colour perception (theimpression of colours). The colour has been examined, both as conscious and subconscious signal,and reasons for it?s influence have been exammed.The practical parts of the degree project have been carried out in active collaboration with thecustomer, The Association Hedemora Assistansservice (HASS), which offers handicapped persons astimulating spare time by personal assistance. A graphical profile-programme and an informationfolderhave been produced, easy received by both handicapped (with defective vision) and normallysighted persons. The graphical profile-programme was made in collaboration with the customer.Concerning the information-folder HASS took the main responsibility for the choice of photographswhile layout, text writing, colour-reproduction, original-production and connecting printing workswere made independently.

Construction of an autonomous wind station was a project with the goal of creating a product that could collect wind data from a sensor and then transfer this data to a server wirelessly over the GSM network. The device would be powered by batteries and solar cells and function fully without requiring external power supply. This required that a small computer was constructed and programmed to store and send data at predetermined cycle times and programming of a server that received the sent data. The project also required optimization of power consumption and dimensioning of solar cells and batteries based on this. The construction of this station demanded research both for the selection of hardware and programming software. The computer was based on a microcontroller and a GSM module that sent the data over the 2G network.

Ever since the development of the pc and their software, in the early 80´s,architects way of work have changed a lot. Nowadays most of the architectspresent all their works digitally and not with hand drawn material, as they didbefore the pc boom.Digital visualisation technique pushes the limits, when it is about presentingarchitecture projects virtual reality.This report studies how digital visualization technique is used among thearchitects today.Together with architects from ABAKO architect firm in Gothenburg, Sweden,interviews has been made to give answers about what they think about digitalvisualization technique. What are the opportunities, advantages- anddisadvantage with this digital technique?The answers from the architects, together with work that has been done withdigital visualization technique in a project called Project Sofiedal, shows thatthis technique has big opportunities when it comes to create nice looking VRpresentations. The result in this report also shows that this digital technique ismore time demanding compared to hand drawn presentations.The investigation shows that digital visualization technique is a goodcompliment when it is about showing the citizens how future projects willaffect the surrounding.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

This degree project has been performed along with Classic Garden in Gothenburg andBallongfirman Far & Flyg in Stockholm. Together we have developed a sun- wind- andrain protection. The protection is permanently assembled and mainly intended for publicenvironments as restaurants and outdoor cafés.The design on the sun protection was already done so our task has been to develop theconstruction and to build a prototype in scale 1:4 and one in scale 1:1. The look of thesun protection is approximately as the name implies, equal an igloo. The lamellae aregoing to fold out in different steps all the way down to the ground and the both sides willbe independently of each other.The first stage in the project was to develop differently principle proposal on how thefunction will work when folding in and out the protection.

Abstract The purpose of this project is to develop a modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

This is a degree project performed at Halmstad University in Sweden on the subject carpet ofreinforcement. This project is developed in association with Celsa Steel Service in Halmstad.The purpose of this report is to investigate how much time that can be saved if carpet ofreinforcement is used instead of the traditional way to work with reinforcement and seewhat kind of parameters that is important between the choices. We are also going to seehow this product affects the situation for reinforcement workers from an ergonomic point ofview.Carpet of reinforcement is made by straight reinforcement?s bars that are welded togetherwith steel bands. These rolls are made at a factory with a machine that welds together thebars in determined centre distance, with desired dimensions after the constructionengineers? blueprints.

?Halmstads Fastighets AB? is a local real estate company investing in sustainable development. One problem though is that the domestic waste, particularly the source separation, at the three resident blocks for students? isn´t working very well. This creates inconveniences for people and environment as well as decreasing the impression on the estates.This project has had the ambition to improve the domestic waste and increase the amount of source separation at HFAB´s student hostels.

This thesis describes the work process and the results for the development of a newkind of ergonomic cleaning mop, ranging from basic concept to a virtually productionready digital prototype. The project was made in cooperation with, Ömer Altun, whowas also the project supervisor, and whose plan it is to launch this new product onthe market in a foreseeable future. The mop is meant to be used by both professionalcleaning staff and ordinary home users. What makes this product unique is that it hasa movable center piece that simplifies the cleaning under low furniture.The work began with the establishment of a product requirements specification andlater a study of similar products and existing functional models was conducted. Afterthese surveys the work began with refining the existing concepts in order to makethem more complete.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

Den projektbaserade arbetsformen blir allt mer vanligt förekommande inom alla nivåer i samhället. Projekt kräver planering, bland annat tid- och resursplanering. Tid är en av de viktigaste beståndsdelarna i projekt, och tidsaspekten är av avgörande betydelse om projektet kommer att lyckas i sin helhet. Resurser är en annan viktig beståndsdel som också har en avgörande betydelse om projekt kommer att nå målen. Samtidigt som projektet som arbetssätt tilltar, tenderar projekten att växa i storlek.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.