The dissertation were performed on SP, Technical Institute of Sweden. The dissertation were carried out on the measurement technical department, this dissertation is a part of a bigger project, project ClampCal. One of SP?s returning assignments are flow-measurement. When flow-measurement is performed, the flow has to be stopped so that a meter can be installed in the pipes where measurement is going to take place. At every stop there is time delay in the flow which causes the customers to loose money. This is why SP wanted to find a better solution so that measurement can be done without any stops in the flow. Usage of a so-called Clamp-on meter was considered, but since the measurement uncertainty is too large it takes some investigation on the parts where the largest uncertainties occur and thus find a solution that can diminish the uncertainty as much as possible. The parts that were considered to have an opportunity to reduce measurement uncertainties were the fluid temperature, its characteristics and the pipe geometry and its characteristics. For the fluid temperature a Pt100-sensor with four different radii for various pipes was used.

This degree project has been performed with Mega Teknik AB in Landskrona. The project has resulted in a workplace for the cable installers of Mega Teknik. The workplace contains a workbench and a cart.The first stage in this project was to make an analysis of the current workplace to identify the needs the installers had.The different principle construction proposals of how the workbench would look like and which functions it would have was made during brainstorming, in groups and alone. These proposals were compared against each other using a functional analysis that has been put up to get the principle construction that fulfilled most points in this analysis.The proposal chose for further work was a cart and a bench with a module intends, the table got a formulation that creates a better reach for the installers.This proposal was generated in Catia V5 to get a better overview of the suggested proposal.During the primary structure phase drawings over all the products were made and the components were chosen. Calculations were made and the product got the dimension required.

Integration of the labor is becoming increasingly topical, with increasing immigration. Labour market integration has been proved to be problematic, partly due to linguistic and cultural differences between the migrant's home country and Sweden. Difficulties with labour market integration have resulted in high numbers of unemployment and dependence on social welfare. Projects VIAM is an employment project conducted by Folkhälsobyrån AB in Västerås, aimed at finding jobs for welfare dependency immigrants. The purpose of this study is to investigate how the informants on Folkhälsobyrån and administrators on the Social service in Västerås has experienced the work of the project VIAM, development issues and the informant´s and administrator´s perception of factors that are influencing immigrant´s employment situation in Västerås.

In the year of 2011, the new CEO of AB Volvo announced a major reorganization. This reorganization was a contributing factor to the start-up of this thesis.Volvo Group Logistics Services (VGLS) is Volvo Group?s global logistics partner, which designs, manages and optimizes all of the group's incoming and outgoing logistics flows. With the reorganization, VGLS started a project regarding responsibilities around railway flows. Within the project a demand to collect logistics requirements occurred.

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

This report presents the results of a thesis in which the department PL Hus at Grontmij AB isstudied. The study has been done in order to locate problem areas in order to streamline andimprove the quality of working. The study was done by an engineering student from theDepartment of Industrial Management at KTH on behalf of Grontmij AB. The project extendedover a period of 20 weeks during spring 2011.In addition to the Department itself has two project managers in two different projects beenfollowed. The method used has been participant observation and was used to be able to comeclose to reality and thus find problem areas where there are opportunities for development.Validation was made through comments and opinions from workers at Grontmij AB, afterreading the reports analysis.Based on a system and holistic approach has parallels been drawn to the production systems suchas TPS (Toyota Production System) and lean production.

My project aims to understand more about the methods used in making woven textiles on an industrial level, and how these tech¬niques can be adapted to create object-specific pieces. On visiting the furniture fair in Stockholm, I was surprised to see that most of the textiles used for furniture were so similar, despite the variation in the furniture itself. My project is about creating textile patterns that are specific for each piece.The idea behind the process could be used for any product, but the pattern I created is specifically for the armchair Accent by Yngve Ekström. I wanted to create the feeling of a pattern moving over the surface of the object and adjusting to it. I worked primarily with differences in density.

The purpose of this degree project is to obtain a greater understanding of how the support for abused immigrant women is designed and if these measures respond to the women?s own wishes and needs. I also want to investigate the possible advantages and disadvantages, there are under the social ser­vi­ces and voluntary organizations (NGOs) and women themselves when it comes to spe­cific sup­port measures for immigrant women. On which basis have these support measures been designed and what experience or research starting points are based on? To what extent do they answer to women?s needs according to the staff, and to the women's own view?The study is based on qualitative data consisting of five interviews and one case report of an abused woman.

This thesis work is the last part of the Master of Science education inmechanical engineering at KTH, Stockholm.The aim of this project was the development of a Multi-zone modelfor NOxformation in Diesel engines. Because of the stringent emissionlegislations, great effort is made to decrease the fuel consumption and theharmful emissions of internal combustion engines. Computer simulationsplay a decisive role in this context because they substitute the expensiveand time-consuming laboratory tests.The model is based on a multi-zone approach and uses the wellknownExtended Zeldovich Mechanism which gives a relation to calculatethe NO formation rate using the concentration of different gas speciesinvolved in the process.All the most important phenomena involved in the Diesel combustionhave been modelled. A special attention is then paid to the equilibriumconcentration calculation; this is a significant part of the model whichstrongly influences the following steps.A Simulink model has also been developed. This second version isbased on the previous model and it is made especially to allow theconnection with other external softwares, GT-power in this case.

This thesis deals with options about information technology in education, the starting pointbeing a project in progress, namely Ostindieprojektet. This is the first collaboration betweenDatatorget and Stadsmuséet in Göteborg. The research is built on a phenomenological approach.The "backbone" information is collected from qualitative interviews, conducted mainlyduring March-April 1995.The questions for the interviews deal with the opinions about the reasons with Ostindieprojektetand IT in education, what conditions required to complete Ostindieprojektet and the ITdevelopment, the availability of the material, how IT-use can affect education, possible qualitiesfor the student with IT-use and how IT-use can affect the role of the school-1ibrary as ateaching tool.Some key subjects examined in the thesis deals with governmental investigations, viewsabout pedagogic and knowledge, problem-based leaming, computer-based education and therole of the school-library. The research shows that the interviewers have the same opinionsas the above mentioned key subjects. In completing the thesis we hope we have created aforum for critical discussion..

Today  Real  estate  companies  face  the  challenge  where  extensive  renovations  on  existinghousing built before 1980 must be performed. Conditions have changed and the housing need performance-­?enhancing measures that meet today's quality. With a current renovation rate,  it  would  take  30  years  to  meet  the  renovation  needs.  The  renovation  rate  must therefore rise dramatically, which requires the real estate companies to act consistently in accordance with commercial principles and in an economically, socially and environmentally responsible way.The  paper  discusses  renovation  strategies  in  four  municipal  housing  companies  in  the Stockholm  suburbs.  The  report  includes  surveys  of  four  ongoing  renovation  projects; Fastighets AB Förvaltaren in Sundbyberg project Hundloken 3, Stiftelsen Signalisten in Solna project Ritorp, Sollentunahem in Sollentuna project Svalgången och Väsbyhem in Upplands Väsby project Dragonvägen. The main purpose of this study was to analyze the practices of redevelopment projects.

Society has depended on fossil-based fuel for a long time, which has led to a fundamental increase of greenhouse gases in the Earth?s atmosphere. To tackle this problem the international community has agreed that action is necessary. Focus is now directed towards local extraction of energy from renewable sources such as biogas.Utö is participating in the Green Island project, which aims to investigate the possibility of making the island climate neutral. This report has been implemented on behalf of Skärgårdsstiftelsen, the main partner responsible for the Green Island project in Sweden.

Intermodulated force microscope (ImAFM) is a type of dynamic AFM. ImAFM opens up possibilities for mapping the topography and making quantitative determinations of material parameters at the same time. With increased information the need to generate more informative images of the sample emerges. In this Bachelor's degree project I have created tools for rendering images of a sample. The topography is plotted as the height and a material parameter is color coded on topography.

This project has resulted in an website at www.tinadunker.se, where you also can download the project in it´s written form to get a deeper view of the project. This project aims to explore fear of violence in public places. Fear of violence reminds us that there is a problem in our urban environment that leads to spatial consequences in using public space. Many groups in our society experience fear in their everyday life but this project has focus on women?s fear.

This project was about the creation of a shorter computer animated film. Thegoal of the project was to explore a different technique of the visual outcomethat should not rely on photorealistic rendering and how to find new interestingways to use 3d-graphic for visuals. A big part of the project was also toincorporate music to create a chosen atmosphere and impact on the viewer butalso to help the story forward and questions such as; ?How can you create anexpression for the feeling you want to transmit?? were formulated. The scenewas built up in a 3d-application consisting of a house and surrounding garden,which within an character was animated to tell the plot.