This report covers a product development project conducted as Bachelor of Science thesis forthe Innovation & design engineer program at Karlstad University.The assignment was supplied by MMB Consulting, Kristinehamn. The purpose of this projectwas to find an alternative way of shaping wire-net insulation mats. This insulation product isused for fire and thermal insulation of technical installations. The insulation consists of stoneor glass wool with a sewn on steel wire netting on the out facing side. This netting has thepurpose to enable fastening to e.g.

This thesis deals with the documentation of non-prioritised material during archaeological fieldwork. The main questions are whether there is a difference in the documentation of the non- prioritised material, between rescue archaeology and research archaeology and what the reasons for such a difference may be related to. Furthermore, the thesis deals with what arch-aeologists write say and do about the subject. To answer these questions, I analyse three different projects; Two research projects, Zvejnieki (Latvia) and Monte da Igreja (Portugal), and one rescue archaeological project, Gyllins Trädgård (Sweden).The most important result is that there is as great a difference between the two research projects as there is between the research projects and the rescue archaeological project. Many similarities can be seen in the projects conducted at Monte da Igreja and Gyllins Trädgård.

We can see an increasing middle age population in large parts of the world. People are healthier when they retire than they were before. As people grow older, physical and mental changes occur that can make the use of cars more complicated. The possibility to travel by car is important for many people to keep the connection with the society and to feel independent. How can Volvo cars face the needs of this growing target group?The purpose of this project is to make a car concept that responds to those needs, it is therefore important to maintain the values of Volvo cars.

This report presents a thesis project at the School of Engineering, Jo?nko?pingUniversity, where the task has been to develop a proposal for a parish communitycentre for the Swedish church?s parish community in Bankeryd.Background1 st of November in 2004 the parish in Bankeryd appointed a special commissionof inquiry called Framtidsgruppen (Future Group), to analyse the parishcommunity?s different activities during the past 5 years and analyse the futureactivities and needs for the upcoming 5-10 years. This analysis would underlie theneeds of building a new centre for the parish community.Implementation, results and conclusionThe main focal points which this report is concentrated on has been to develop abuilding that is well suited for the activities, well adjusted for disabled persons andthe building shall be appealing in an architectural point of view.Based on the information provided from the parish community, studies ofliterature, reference objects and discussions with the contact person at the parishcommunity and the instructor of this project, the programming has beendeveloped. The building?s programming has been the source for the continuedwork with floor plans and the building design..

An inquiring study of literature has been conducted, about the human colour perception (theimpression of colours). The colour has been examined, both as conscious and subconscious signal,and reasons for it?s influence have been exammed.The practical parts of the degree project have been carried out in active collaboration with thecustomer, The Association Hedemora Assistansservice (HASS), which offers handicapped persons astimulating spare time by personal assistance. A graphical profile-programme and an informationfolderhave been produced, easy received by both handicapped (with defective vision) and normallysighted persons. The graphical profile-programme was made in collaboration with the customer.Concerning the information-folder HASS took the main responsibility for the choice of photographswhile layout, text writing, colour-reproduction, original-production and connecting printing workswere made independently.

In this project a simulator has been developed (in C++) with the purpose of illustrating how changes in environmental regulations, tax levels and other policy measures affect the composition of an energy system. The aim of the project was to investigate how energy companies? investment strategies are affected when changes in economic and environmental conditions occur. A standard scenario has been created based on current Swedish conditions, but the user can create new scenarios and set parameters freely. The user is tasked with building power plants to supply the city/region with district heating and electricity during a pre-set number of years. When the simulation is finished the result is graded in the following categories: economy, environment and quality. To evaluate the simulator three scenarios were created (?early 20th century?, ?reduced environmental control? and ?future?) in addition to the standard scenario and these were compared with each other by examining how a select group of power plants perform under the given conditions.

Construction of an autonomous wind station was a project with the goal of creating a product that could collect wind data from a sensor and then transfer this data to a server wirelessly over the GSM network. The device would be powered by batteries and solar cells and function fully without requiring external power supply. This required that a small computer was constructed and programmed to store and send data at predetermined cycle times and programming of a server that received the sent data. The project also required optimization of power consumption and dimensioning of solar cells and batteries based on this. The construction of this station demanded research both for the selection of hardware and programming software. The computer was based on a microcontroller and a GSM module that sent the data over the 2G network.

Ever since the development of the pc and their software, in the early 80´s,architects way of work have changed a lot. Nowadays most of the architectspresent all their works digitally and not with hand drawn material, as they didbefore the pc boom.Digital visualisation technique pushes the limits, when it is about presentingarchitecture projects virtual reality.This report studies how digital visualization technique is used among thearchitects today.Together with architects from ABAKO architect firm in Gothenburg, Sweden,interviews has been made to give answers about what they think about digitalvisualization technique. What are the opportunities, advantages- anddisadvantage with this digital technique?The answers from the architects, together with work that has been done withdigital visualization technique in a project called Project Sofiedal, shows thatthis technique has big opportunities when it comes to create nice looking VRpresentations. The result in this report also shows that this digital technique ismore time demanding compared to hand drawn presentations.The investigation shows that digital visualization technique is a goodcompliment when it is about showing the citizens how future projects willaffect the surrounding.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

This degree project has been performed along with Classic Garden in Gothenburg andBallongfirman Far & Flyg in Stockholm. Together we have developed a sun- wind- andrain protection. The protection is permanently assembled and mainly intended for publicenvironments as restaurants and outdoor cafés.The design on the sun protection was already done so our task has been to develop theconstruction and to build a prototype in scale 1:4 and one in scale 1:1. The look of thesun protection is approximately as the name implies, equal an igloo. The lamellae aregoing to fold out in different steps all the way down to the ground and the both sides willbe independently of each other.The first stage in the project was to develop differently principle proposal on how thefunction will work when folding in and out the protection.

Abstract The purpose of this project is to develop a modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

This is a degree project performed at Halmstad University in Sweden on the subject carpet ofreinforcement. This project is developed in association with Celsa Steel Service in Halmstad.The purpose of this report is to investigate how much time that can be saved if carpet ofreinforcement is used instead of the traditional way to work with reinforcement and seewhat kind of parameters that is important between the choices. We are also going to seehow this product affects the situation for reinforcement workers from an ergonomic point ofview.Carpet of reinforcement is made by straight reinforcement?s bars that are welded togetherwith steel bands. These rolls are made at a factory with a machine that welds together thebars in determined centre distance, with desired dimensions after the constructionengineers? blueprints.

?Halmstads Fastighets AB? is a local real estate company investing in sustainable development. One problem though is that the domestic waste, particularly the source separation, at the three resident blocks for students? isn´t working very well. This creates inconveniences for people and environment as well as decreasing the impression on the estates.This project has had the ambition to improve the domestic waste and increase the amount of source separation at HFAB´s student hostels.