This bachelor thesis includes two different manuals and design of an interface box between a test object and a general test station (computer) with ARINC429 communication.There are three different purposes with this project:The first is to setup a general test station with ARINC429 communication using a communications card from DDC (DD-42916i3-300) and software from Ampol Technologies (dataSIMS).The second is to design a new interface between the test computer and the test object. As well as implementing two components in the equipment.The third is to write two separate manuals to guide the users of this equipment. There are two different kinds of users of this equipment, technicians and system engineers. Technicians use the equipment to test and repair flight components. System engineers will implement new components in the equipment.The result of this project is a working test station with a new interface and two manuals..

The aim of this master?s project is to explore ways to perform piano music conceived dramatically. I do this through performance of Beethoven?s Appassionata Op. 57 and of Scriabin?s Piano sonata no.

This degree project is a realization of a strategy for collaboration between an industrial designer and employed workmen of a producing company. The collaboration aims to engage everyone involved in the co-authorship of a products design and manufacturing history. The realization has taken place in an open dialogue where the designer no longer owns the design process by himself. The project has been carried out in cooperation with the company Iris Hantverk. The company is owned by the Swedish body for visually impaired and has their main production facility in Stockholm.

The study investigates questions and considerations emerging when stone in historic buildings needs to be replaced. The focus is on the surface treatment of stone in sandstone façades in pre-industrial buildings. That means buildings constructed by traditional methods and craftsmanship without the use of modern technology.The research issue originates from the extensive stonework that is planned for the façades of the Stockholm Palace. The project includes the replacement of large quantities of damaged stone to newly cut stone. This raises the questions about the use of modern and rational methods for surface treatment on the replacement stone.

A vehicle that carries a person sitting in a wheelchair has been rebuilt. The original vehicle was provided with a petrol engine, hydrostatic drive and a mechanical steering rod, making it noisy and hard to maneuver. The purpose with this project was to convert the vehicle to make it more environmental and easier to drive.A new design has been proposed where an electrical drive has replaced the noisy combustion engine and an electrical motor with joystick control has replaced the manual steering.The project was divided into two parts. One mechanical part where the construction of the drive and steering were to be decided. The other part involved programming the microprocessor and implementation of all the necessary electrical for the control system of the vehicle.

This report is the written documentation of a project work carried out at the Division of Engineering Materials at Luleå University of Technology in cooperation with Seco Tools AB. The project deals with the analysis of residual stresses in Ti-Al-N thin film grown on WC/Co cutting inserts. The composition of Al varied from 0% up to 75%. Increasing the Al content in the Ti(1-x)Alx N compound improves the compressive residual stresses even after annealing of the material. The experiments have been performed in a high temperature x-ray diffractometer (HTXRD) where the interplanar atomic spacing was determined in-situ and subsequent converted into stresses.

Achievements within the fields of computer- and telecommunication technology have led to a revolution when it comes to managing information. These achievements have made it possible to offer new services in healthcare, especially in telemedicine. New technology has become a complement to traditional care, thus partly compensating for insufficient time and resources. Telephone Linked Care (TLC) is a telecommunication technology that enables automated dialog counselling and monitoring of patients in their homes. During the last two decades numerous randomized controlled studies with TLC have demonstrated improvement among outpatients with chronic and health behaviour disorders.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

On some occasions it may be inappropriate with a cameraman behind the camera. In somecases there is no cameraman available or it is a smaller event, like a family celebration, to befilmed. It can also be difficult for a cameraman to shoot from certain angles. One solution forthis kind of situations can be to remotely control the camera movements. There are thosekinds of solutions on the market today but they either address professional filmmakers or thefunctionality is limited, for example by the absence of wireless remote control.This project aims to develop a solution to the problem with absence of wireless remote controland also a solution with more flexibility and less complexity than today?s solutions.

The aim of this Master's thesis is to explore the function of public libraries as arenas for young people's artistic creations. It examines how the public library makes activities based on independent creativity visible, and what activities of this sort imply to the public library. The thesis also relates this to the public library's task in society. The main object of examination is Demoteket, an on-going project in the south-eastern parts of Sweden. In this project Länsbibliotek Sydost co-operates with Reaktor Sydost, a centre of resource in the fields of young communication and filmmaking.

The usage time is an important part of the specification for products powered bybatteries. The usage time is affected by a number of different elements; technical,environmental and how the product is being used. The method to determine theusage time is intended to define how measurements and calculations are to berealized along with influencing factors to keep in mind. With support from thismethod the intention is to gain control on how well the established usage time canbe expected to cohere with the real value and what affects the value.The study is done specifically for hearing protectors with battery powered built inelectronically functions. The functions can be level dependent function forambient hearing, 2-way radio communication, Bluetooth or FM-radio.The first chapter of the report describes the literature study performed in theproject.

The project has been performed in a close collaboration with Hörsam who works in the field of hearing technology. In a first meeting with the company, the Project group was showed a few existing storage boxes for hearing aids. The company thought they were unnecessarily large with plenty of unused space and wanted a new, smarter solution to be developed.The project began with user studies in which audiologists, maintenance technicians, future users and others were interviewed. The purpose was to obtain their views on today's storage boxes and to find out how well the users maintained their hearing aids. It proved to be a large lack of knowledge regarding the management of hearing aids within the users.

The number of locals in Stockholm who chooses the bike in front of public transport has increased significantly in recent years. The product purchaser of this project, Joakim Victorin at Sigma AB, has a keen interest in cycling, which resulted in a fairly obvious topic of this project; through a web application Sigma AB wanted to make it possible to handle results from professional as well as amateur competitions in cycling.The purpose of this web application is to simplify reporting and handling of competition for both small and bigger bicycle races. By providing the users of the system a platform independent client, any available device may be used.This thesis has followed the development principles which prevail on the ASP .NET MVC 3 concept. When developing the system the Microsoft Visual Studio 2010 development environment was used. The framework and the pattern of ASP .NET MVC 3 is a prominent part of today?s web development.

This thesis is a cultural theoretical case study of the art project (O)önskad samhällsförbättring.Via an analysis of the project, that is based on theories of power, resistance and contemporaryurban development, it examines the construction of urban space, its impact on public art including the ability of art to initiate evolvement of the urban public space.The last decades art has plaid an important role in what is called the creative city; to become attractive nodal points of the global economy, larger cities increasingly invest in art,culture and creative industry. Simultaneously the urban public space is limited to activitiesand expressions of art that are presumed to create economic growth. This introduces animpression of what is allowed and what is not allowed, possible and not possible, wished andnot wished which, as a consequence, evolves the public space. The events during the artproject and the reactions that followed enlightened these limitations. This tells a story, not only about the structuring process of the local urban space, but also important changes that are created as a simultaneous effect at different levels in society, as well locally as globally.