This degree project is made for Sundbyholms Golf&Country Club in Eskilstuna. The aim of the report is to produce a website which include a golf course interactive guide and an online game. Programs that have been used during the project are Adobe Photoshop, Macromedia Dreamweaver, Macromedia Director, Discreet 3DS Max and the plug-in 3DS Max Exporter. The choice of programs are based on experience and knowledge from the university education Media and Communication Engineering at Linköping University. The golf course guide contains a 2D-guide (image) and a 3D-guide (interactive image).

Nowadays, a lot of resources are spent on developing systems that will make it possible forvehicles to act autonomously, and make them more effective. One of the projects that isworking on this is the Gulliver Project. Gulliver has constructed a number of miniaturevehicles equipped with various sensors, to use as a physical testbed for autonomousdriving. One big disadvantage with this method is the long iteration time that occursduring the development and testing of a new software.This project has improved this process by developing a system architecture of a virtualtestbed where it is possible to simulate autonomus vehicles that communicates throughany type of wireless network. The testbed has made it possible to simulate autonomusvehicle systems that with a reasonable margin of error, acts like the system would actin a physical test.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

This thesis discusses the theory of securitization in relation to the issue of irregularmigration, from EU level to national level. By using discourse analysis, the purpose isto explore whether the discourse leads to practice when it comes to nationalimplementation of EU debates on return policy. The material used in this workconsists of policy documents regarding the Return Directive from the EuropeanCommission as well as the Reva Project in Swedish migration policy. The mainobjective of the Reva Project is to make the process of returning irregular immigrantsmore effective and it has been strongly criticized, both by media and public opinion.The conclusion of this case study is that even if the security rhetoric may appearstronger on the EU level, the main elements of the security discourse are stillportrayed in the implementation on the national level. Based on this analysis we canmake the presumption that discourse develops into practice in the case of returnpolicy in the EU-member state relation..

The study deals with the causes of unjustified differences in pay between women and men in the banking sector. The purpose of this paper has been to examine how a gender project implemented in the private banking organizations from a gender-and implementation perspective. The aim of the project examined is to even unjustified differences in pay between men and women in the banking and finance sector. The main issues are: ? How has the project been implemented and what are the real and perceived results? ? How can the opportunities and barriers to successful implementation course with emphasis on gender? The method used is a qualitative study, where the empirical material consisted of focus group interviews.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

This reportcommunicates the processes and results of my degree work in industrial design at candidate level at Umeå Institute of Design.During my degree work I had a cooperation with Svenska Jägareförbundet (Swedish Hunters Assosiation).The aim for my project has been to explore how I could make hunting a safer hobby and undertaking. Every year people get seriously injured and in average 2 people a year dies  due to hunting accidents. My goal is to identify problems within the hunters communication and approach. Through a creative design process I will find a valid  nd realistic solution to these problems. My project will be presented as a conceptual solution  hat will be based on currently existing technology.

In this report the two authors, and project contributors alike, describe their work withdeveloping a solar cooker intended for usage in the developing countries of the world.Specifically, the work aims at developing a new, solar heat driven cooking device, possiblybased upon the current product. This should, in comparison to the current product, be lighter,easier to transport and to produce. Also, the new product?s production mustn?t be more costlythan today and the included materials and components must be obtainable from within theBolivian national borders where the product is currently produced. During the project, certainadvantages with a more efficient, and, above all, a more moderately priced product, werediscovered.

This Master of Science thesis was completed at the Department of Machine Design at the Royal Instituteof Technology in Stockholm in collaboration with Lund Faculty of Engineering, Luleå University ofTechnology and Stanford University. At Stanford University a global product development project wasrealized as part of the course ME310. The project was initiated by the American company ImmerseGlobal whose vision was to develop a new type of Atmospheric Water Generators, a machine that absorbsthe moisture in the air and via a water system transforms it to pure drinking water. The project was partlyfinanced by the Product Innovation Engineering program, a Swedish research and development programfor increased innovation capability in organizations.In parallel with the global project in the ME310 course the product development process was studied inorder to compare it with a product development course at the Royal Institute of Technology, IPU. Thetwo courses are similar to each other in several aspects.

The project was carried out together with OC Off Course who manufactureand distribute mainly electric bikes.In today?s society, alternative sources of transportation becomes more andmore present and several bicycle sharing programs arises in major citiesacross the world every year.Something that doesn?t exist too much as of yet is bike sharing programsthat uses electric bikes. An electric bike is a convenient way oftransportation as well as a good way of avoiding traffic. With an electricbike you avoid having to sweat when biking over hills or when you need totravel over longer distances.The goal of this project is to develop a bike sharing station according tothe functions need to be met.This thesis Is based on Fredy Olsson´s methods principkonstruktion aswell as a couple of concept generating methods from Kenneth Österlin.From this, a number of sketches were made that later was evaluated inseveral steps in conjunction to a set of specifications. A 3D model of theselected concept was later made in CatiaV5 for a complete product..

The essay describes the bachelor project by Marie Hanås, in collaboration with Skälsö Arkitekter. Skälsö Arkitekter are currently developing an area in the north of Gotland, Bungenäs; previously home to lime stone quarries and military bases.The brief was to design a set of outdoor furniture to complement the new development. The main effort of the project was in designing furniture that would fit the environment visually but construction issues were a major secondary concern, to ensure the easiest possible manufacturing. A reference group of coastal house owners were interviewed, and their feedback, together with an analysis of functions, trends and target groups, were the base for the ideas.Of the five concepts presented, Skälsö Arkitekter chose one to develop further. This was done through sketches, models and 3D models and led to the final result which is lightweight furniture of Gotlandic pine wood with an industrial touch.