Guazuigua is a small village in Bolivia, which has had too small water resources, especially for irrigation. A project started after some studies were made, to create a canal to provide the village with water from a nearby town. To make the canal work it had to cross a dried out river. There have been several attempts to cross these dried out rivers, but with poor results. The purpose of the report is to provide a solution for this problem.

The Stockholm Bypass is an infrastructural project planned to be located west of Stockholm. This study investigates the argumentation concerning the project from different perspectives. The theoretical starting point is within Decision Theory. The main theories include Bounded Rationality, Kingdon's study of the political agenda and theory regarding venue shopping, framing and lobbying. The method chosen for this qualitative case study consists of both gathering data through semi-structured interviews and through documents provided by stakeholders and information available publically through archives and media.

The formation of sovereign states in regional blocks has become an essential feature in the world system. Therefore, the purpose of this paper is to investigate which motives and driving forces that affect the creation of projects of regional integration outside Europe and the Western World. By choosing the Latin American project of integration ALBA (the Bolivarian Alliance of the Americas) as a case of regional integration outside Europe and the Western World, the study investigates the motives expressed by the most prominent actors of the project, Venezuela and Cuba. ALBA is chosen as a representative and a unique case and through the consumption of the gramscian and the realist approaches, the essay defines two motives that affect the creation of projects of regional integration. As a way of investigating the actors? motives, the paper studies political statements, especially those of the Venezuelan president Hugo Chávez, and official positions expressed in central documents and declarations.

As part of an internship at Ericsson, this report was written to enhance the understanding of how it is to develop a system that is well established at the workplace. To improve an already existing system is not always as easy as many developers may think. In this report the pros and cons of developing an already existing system has been researched and analyzed. Do note that the results are only from one development of a specific system and that comparison of other developments has been made from other reports and not from experiencing it firsthand. It was found that the choices made can have an impact on further developing and it is important to write down what has been done.

This study began with a mission statement from the firm Tobii Technology AB to identify customer needs in the relatively new and rapidly growing market for eye tracking analysis. After consuling external experts, the authors however found that the availability of previous academic published market studies of new and fast growing markets was poor. Therefore a decision was made to execute the task and at the same time create a methadology for future studies in this area. The identification of customer needs, which formed the basis of the insights and analysis, led to frequent discussions between the authors and the firm's supervisors. This resulted in a project plan and a decision that an iterative model would be used, were earlier decisions would be questioned and refined throughout the project.

This rapport is result of a project. The purpose of which was to design a circuit that is used in a heat glove. The heat glove is the technical aid which provides heat inside a glove.It is specially suited for old people who have problems with cold hands because of decreased blood circulation.There already was an old circuit in the glove that gives a constant current which develops heat from battery to glove through a circuit. The temperature is between 32 and 34 degrees.The problem with the existing circuit was to regulate the temperature. There is only on/off switch and there is no way to adjust desirable value of the temperature.In order to solve the problem the old circuit was investigated.

The natural disasters of recent time have caused the people of Sweden to donate very large amounts of money to different fundraising organizations. With this in mind, we found it interesting to examine the extent of disclosure in the annual reports of the Swedish fundraising organizations. Thus, the purpose of this study is to identify which factors that influences the extent of disclosure of accounting principles in the annual reports of Swedish fundraising organizations. To fulfill this purpose we conducted a content analysis of 149 annual reports from Swedish fundraising organizations. To help us explain the levels of disclosure we applied stakeholder theory, institutional theory and legitimacy theory.

The new accounting standards IFRS and IAS was implemented in January 2005, the purpose was to harmonize accounting standards world wide. As a result of these new rules the real estate companies are allowed to appraise real estates assets at market value. It has long been debated whether this appraisal fulfils the requirements for relevance, reliability and comparability.The paper attends to how banks control the information given by the real estate companies in the process of credit granting. As an introduction we describe the purpose of accounting and the problematic´s about appraisals with market values. Further on there is a discussion on which factors are taken into consideration when banks grant credits.The study is built on interviews at three different commercial banks.

We are surrounded by things. They have their own personalities. Some evokes our emotions. We want to own them. We develop strong relationships to each other.

In several cases, systems that have been developed have been very time consuming and cost a lot of money, but they still do not fulfil the users requirements and requests. To make new systems better, you have to find a way to communicate that allows the developers to understand the needs of the user. The aim for our thesis is to highlight the importance of communication in system development. To investigate this we have choosen to do a study of the real-estate system. The work methods that have been used include mock-ups and informal conversations with the user, who is employed by the Church of Sweden in Ronneby.

Vårt syfte med uppsatsen var att ta reda på om KASAM-begreppet, trots att det har några år på nacken, fortfarande ses som betydelsefullt. Vi utgick från personalens perspektiv gällande KASAM's betydelse för barn 0-12 år, placerade på institution eller med någon form av insats från öppenvården. Genom kvalitativa intervjuer tog vi del av personalens erfarenheter av KASAM's betydelse för barnen, hur de arbetar och om de metoder de använder sig av , ger möjlighet att skapa en känsla av sammanhang för barnen. Vid tolkningen av vårt intervjumaterial utgick vi från tre teman baserade på våra frågeställningar. Det som framkom av materialet var att KASAM har stor betydelse för barnens välbefinnande.

This study is an investigation of a sub community within the community of Hovsjö. The local government has financed a project in Hovsjö which is intended to bring about positive development. The prior object of this paper is to describe the project, it?s planning, it?s methods, it?s carrying through, and it?s goals. This study presents the district of Hovsjö in Södertälje.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

In this project I have worked with creating a new kind of room in a hospital enviroment for children. The main purpose of the project has been to form a secure and positive experience for the patient while visiting a specific room at the department of childrens physiologi, at Drottning Silvias Children- and youth hospital in Gothenburg.The project was based on questions like how it is possible to move the focus from the unsecure and scary, to something secure and positive, when the patient is going through an testing situation.The target gruop included a wide age span (0-16 years old), therefore I have worked with a theme, H2O, that works for diffrent ages. In the room, I have applicated the theme in different levels that is changeable depending on the age of the patient.During the project I have presented my ideas for the staff at the hospital. We have discussed their problems, what they wish in their working enviroment and how they experience the situation for the patients. I have also asked the patients how they experience the specific room today.The result of the project is a visual idea of how you can create a room, that you don?t exepect to find in a hospital..

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.