In this Thesis the possibilities of designing a larger building that is very energy efficient in the sense that it would not need a conventional heating system are discussed. Solar radiation transmitted through the windows, internal heat from occupants, lamps and electric appliances inside the building and heat recovered from the ventilation system then have to be sufficient for the heating of the building. This study is of general interest since the property company, Akademiska Hus, plans to use this study as a first step in determining if this technique could be used in the future and thus be worth further investments. A building without a conventional heating system of the size investigated in this project has not yet been built.The energy needed for the heating of the building was simulated using VIP+.The conclusions from the study are that it is possible to build large buildings without any conventional heating system. This could be achieved in many different ways, for example by lowering the inside temperature or by using better windows and heat recovery system with higher efficiency.

This paper is a study of corporate governances in the municipal of Stockholm. The purpose of this paper is to enlighten the problems and opportunities for the corporate governances of the wards in the municipal of Stockholm. The municipal of Stockholm is made up of 18 relatively self-governing wards, whose activities bear a resemblance to one and other. Therefore we have specified our survey to corporate governances in the ward of Skarpnäck (Skarpnäcks stadsdel), to be able to use this ward as an example to corporate governances in the entire municipal of Stockholm. The essay emanates from the important management theories: Budget, Integrated Management system (ILS), Benchmarking and Balanced Scorecard.The essay is based on interviews and a poll survey we conducted in the administration of the ward of Skarpnäck, and also based on interviews with Stockholm?s city hall.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

This bachelor thesis includes two different manuals and design of an interface box between a test object and a general test station (computer) with ARINC429 communication.There are three different purposes with this project:The first is to setup a general test station with ARINC429 communication using a communications card from DDC (DD-42916i3-300) and software from Ampol Technologies (dataSIMS).The second is to design a new interface between the test computer and the test object. As well as implementing two components in the equipment.The third is to write two separate manuals to guide the users of this equipment. There are two different kinds of users of this equipment, technicians and system engineers. Technicians use the equipment to test and repair flight components. System engineers will implement new components in the equipment.The result of this project is a working test station with a new interface and two manuals..

sustainable development by reducing the energy use by EU:s directive of energy efficiency and the UN Convention. The second purpose is to present the technical solutions regarding ventilation and heating system that is being used in passive houses. This was done using 8 passive houses, 4 germany and 4 swedish passive houses. Even the international and Swedish system requirements for passive houses have been addressed in this project. The goal was also to explain how and why the mechanical system in passive houses has developed to the technology used today.

Accounting firms operate in environments with high competition for graduates and students today expect employers to be present on Facebook and the like. We aim to describe whether two major accounting firms use social media in their graduate recruitment. We chose to do case studies of Grant Thornton and Ernst & Young and how they use social media channels aimed towards graduates. Through a through study of how the two companies communicated through various social media, we concluded that Grant Thornton was significantly better than their larger competitor at social media use. Both companies use Facebook as their main communication channel.

A vehicle that carries a person sitting in a wheelchair has been rebuilt. The original vehicle was provided with a petrol engine, hydrostatic drive and a mechanical steering rod, making it noisy and hard to maneuver. The purpose with this project was to convert the vehicle to make it more environmental and easier to drive.A new design has been proposed where an electrical drive has replaced the noisy combustion engine and an electrical motor with joystick control has replaced the manual steering.The project was divided into two parts. One mechanical part where the construction of the drive and steering were to be decided. The other part involved programming the microprocessor and implementation of all the necessary electrical for the control system of the vehicle.

NorFor is a cooperative project between the consulting organisations owned by the farmers in the Nordic countries ? Sweden, Norway, Denmark and Iceland. The project started in 2001 and the outcome, the system for ration calculation NorFor Plan and the model for evaluating the ration NorFor Evaluation, was completed in 2006. Along with NorFor Plan economical optimization are available and according to literature, the optimization will generate a 2 öre lower feed cost per kg milk, and thereby improve the profit for the farmer. The use of NorFor Plan in Sweden for feed optimization during spring 2008 has been very small. In this study eight herds in the middle of Sweden fed half the herd according to the classical system used in Sweden and the other half according to NorFor Plan system.

This is the final documentation of the basis that can be the foundation of how to solve theproblem with leaking hydraulic oil in a shoe press at the company Albany InternationalAB in Halmstad, Sweden.The project has been performed at Halmstad University as a degree project commissionedby Albany International AB. The purpose of the degree project was to find a way ofdetecting the hydraulic leak of a shoe press. The reason is that the shoe press runsunattended during nights and weekends, this can cause an extensive decontaminationwork and production stop if leak. The hydraulic oil could be leaking in large amounts orslowly as a fine mist. The development of a working system that can detect a hydraulicoil leak and stop the machine before a large amount of hydraulic oil leaks out wouldconsiderably reduce the cost of the decontamination work.

The purpose of this degree project is to study a work evaluation project in a municipality, on the basis of key participants. The municipality is the employer, per-forming the workplace project and the chief objective is to reach gender equality between the employees. Equal pay for equal work. Through work evaluation is it pos-sible to find out which of a lot of different jobs, which have equal requirements. The jobs, which have equal requirements, should have equal pay.

The purpose of this essay, ?Now they are chasing paper-less - A qualitative discourse analysis of mass medias depiction of the Reva-project and the work of the police?, is to analyze how mass media portrays the Reva-project and polices work with the project. The basis for the essay will be eight selected newspapers. The Reva-project implies collaboration between the Police, the Swedish Migration board and the Swedish Prison and Probation Service within the border police. The aim of the project is to enhance the efficiency and the execution of the border police work, in accordance with the government?s target.

Websites today only offer simpler form of technical analysis and are not fun to use, therefore student decided to build a website that makes technical analysis a bit more fun by giving user possibility to experiment with settings for technical indicators and also see clear visible results from analysis. Student decided to build website in ASP.NET. Technical indicators for this project only consist of those who give buy and sell-signals via cross-over, no divergence or pattern finding.This project has three questions that define this project. It?s important that there is good functionality so that performing an analysis is perceived as simple, one question is therefore; what functionality for website is needed in order for analysis to be perceived as more simple?Technical analysis is a pretty complex subject and demands an interface that is perceived as easy to understand and easy to use, it?s therefore important that the interface is well designed, second question is therefore; how should the interface be designed to be user-friendly?When systems grow large they often become hard to develop and later on unmaintainable because of the accumulated complexity and dependency between classes, the code is a mess, the last question is therefore; how can the systems complexity be eased with object-oriented design principles?Jakob Nielsens ten heuristics for User Interface Design were used as inspiration for designing the interface for the website.

The projecting time in the construction industry needs to become more efficient toshorten the amount of time it takes to project a build. One of the North's leadingconstruction company NCC constuction Sweden AB has developed a form ofcollaboration called ?NCC project studio? that they use in some projects today.My thesis consists in bringing forth the most important aspects of the collaborationform called NCC project studio. The point of this is to use my thesis to help thecompany develop a quality document that can assist them when starting collaborationbased on NCC project studio in the future.The conclusion of my thesis was that much of the focus needs to be on explaining tothe participants what NCC is aiming to gain from working with the NCC projectstudio and also which important parts that needs to be worked on..

In recent decades, project based work form has taken a dominant role of work for many companies. Developments in the field have progressed rapidly and research has contributed to more efficient working practices. This study describes the elements that a project manager should keep in mind when he leads a project without actually being physically present, complex factors occurred and the basic approach to encounter them. The aim of this report is to examine factors that arise in the context of coordination at a distance and how companies, in their daily work, surpass these obstacles. The study does not include cultural differences, time zone differences and language differences, all very common in project management at distance.

How projects are managed can have a big impact on the project`s result. There are different types of frameworks on the market whose purpose is to help project leaders to pursue a successful project. Those frameworks focus on larger product development projects and both the literature and companies have addressed that the frameworks are too comprehensive for smaller product development projects. They have therefore asked for a framework that is more suitable for those smaller projects. To complete a project on time and to the planned cost is important in both larger and smaller product development projects.