In recent years seemingly everything has become digital. Some areas, like classical sports, have been slower to adapt to new technical development. Golf is an example of this. Usually when people play golf they bring their clubs, golf balls and a paper scorecard on to the golf course. The advantages of keeping score in a digital way areevident.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

This study has been performed at a smaller high school and with its industry students, the high school is located in a small industrial community. The purpose of my study has been to find out what students think about their work with the project work, what they think has been positive and negative, how their motivation is influenced by the work on the project and if the work has been affected by factors outside the school world.The interviews have been carried out like normal conversation with open questions. The students who participated in the study comes from the school where I did my internship. The selection was done by asking all students from a specific course, those who were positive to participate are also the ones I have chosen to interview. My main study results, in summary, described as the students, once they were inside their work were positive to the project work and felt motivated in their work. Negative experiences, for the students which attend a practical program, has mainly been economic, as the school does not provide any financial support.

I denna rapport beskrivs det hur man har valt att lösa en dot1x-implementation på en Cisco 3000 switch. I rapporten återfinns konfiguration och egna tankar om dot1x. Rapporten innehåller även en guide om vilka kommandon som kan vara bra att använda sig av vid en dot1x-konfiguration. Funktioner och annan användbar information som rapporten handlar om är Dot1x, EAP, Autentiserings Server, Authenticator, Supplikant, MAB, RADIUS, Mac-Format, Host-mode och Vlan..

Previous research has shown that internal communication can be linked with how motivated a project team is, but research that shows examples of how this works is missing. This paper therefore aims to study how two different IT projects are working with internal communication. By analyzing its strengths and weaknesses, we wanted to study how these could be linked to the project team's motivation. In doing so, we wanted to be able to give examples of how projects could work with internal communication to motivate their project teams. Essay questions of the study are:? How does the internal communication occur in the projects?? Which strengths and weaknesses are to be found in the internal communication?? How does the internal communication influence the project members' motivation? To fulfill the purpose of the study it was needed informants interviews with the project manager for each project to access the facts, and respondent interviews with the project members from each project for accessing opinions.The results from the interviews show that both projects have effective communication, even if it looked different, and doesn't quite agree with what previous research recommends.

The main purpose of this master thesis is to identify guidelines for a sustainable production that can provide useful information concerning the establishment of a biodiesel production. These guidelines concern the surrounding production environment, such as infrastructures and industries.The thesis is based on theoretical grounds surrounding industrial symbiosis, biodiesel production and how sustainable development should be designed. A study of an already established producer in a similar business area has been used to provide a picture of similar projects. The thesis has with the supervisor's consent focused on the production conditions that are affected by location.The production conditions selected are heating, raw material market, residual and sustainable profile. These are then evaluated through an Excel-based sensitivity analysis.

This is a study of an experimental project called ?Eget företagande ? egen försörjning?. The aim of this thesis is to explore if the course self-employment in Swedish for immigrants will become a permanent activity. The study is based on interviews with participants from the projects management team and the interviews has been analysed with methodological inspiration from Jonas Söderlunds project competence model. The focus lies in the participant?s perception of the project work and their thoughts about the permanent activity of self-employment in the future.

This thesis compares the impact on disk performance in a GNU/Linux  environmentwith three encryption algorithms: AES,  Serpent and Twofish in three different implementations: DM-crypt, Loop-AES and Truecrypt. For all three algorithms a key length of 256 bits is used.The thesis shows that the least performance impact during data encryption, and thus file writing, is reached by using AES or Twofish encryption implemented in DM-crypt or TrueCrypt. The thesis shows that some data operations with a sufficiently low processor utilization barely affects disk performance at all if encrypted using the optimal implementation and algorithm.It is also discovered that the performance impact during data decryption, or file reading, can be minimized by using the most efficient implementation and algorithm. The best results are met with the AES or Twofish cipher, regardless of implementation.An important conclusion that  is  drawn is that it is hard to determine a superior encryption solution for all purposes. However, by reviewing and examining the collected data from all aspects of disk performance the AES implementation in TrueCrypt is, with small marginals, determined to be the most optimal..

The foremost objective of business organizations is to generate value for shareholders and to opt for strategies which optimize it. Hence it is of key concern for business leaders to appreciate how operations best are run to maximize value creation. This study explores how financial theory can reveal the link between one particular business strategy and the corresponding effect on shareholder wealth. The question in focus is whether construction companies can enhance their value creation by implementing shift-work to increase the weekly production rate. The thesis particularly targets apartment block projects in Sweden and has the construction company Peab AB as primary object of study.

The education program System design at the University of Kalmar has since it?s beginning been missing a near by studio for it?s students studying towards audio and music. In the choice of examination project I would take upon this task, which was long wanted for the teachers and students at the university?s Musikhuset.Musikhuset became the buyer of the project, and the studio was to be installed at their premises. Unfortunately, the project got jammed by the university?s financial savings calculations, and was due to this delayed in the end for 11 weeks.

This thesis includes a description of the project flow for our projects at Semcon. The emphasis is on designing a manual for elMaster Concept.The project flow provides several minor and major elements plotting schedules for this project and the establishment of a manual. When a schedule is drawn, lists and tables with components and connections can be created. This is done to better manage drawings and make changes. These diagrams and tables are used in product manufacturing, testings, controls.

This project is a step towards automatic firefighting. The goal is to decrease the number of personal injuries by replacing the human firefighter with robots or similar technical tools. Especially in very hostile environments due to risk of explosions or building collapse. A robot is easy to replace and can be maneuvered from a safe distance. The idea of the project comes from the company Drones Networking which aims for developing a totally autonomous firefighting system.

The aim of this thesis project is to produce an algorithm for finding a topologicalrepresentation of a polygon, called a straight skeleton, using floating pointarithmetic. Various straight skeleton algorithms are examined and discussed witha focus on time complexity and one is chosen for implementation. This implementationis then compared with the open source library CGAL with regards torunning time. The result is an algorithm which is based on an algorithm by Felkeland Obdrzalek and which, for polygons with more than five thousand vertices andthree significant digits representing points, runs around 25% faster than CGALsimplementation. Complications regarding the use of floating-point arithmetic arealso discussed..

Is culture accessible to all in Sweden or do challenges in accessibility begin in childhood? During the academic year of 2010/2011 the Schools for Music and Arts in Göteborg participated in a project entitled En kulturskola för alla (A School for Music and Arts for All). This thesis' objective is to describe the project as well as examine the method the Schools of Music and Arts use to include children with disabilities and what suggestions can be made to further develop the project. Through En kulturskolla för alla, approximately 200 children with disabilities now haave better teachers. The project included 18 music and arts teachers from eight schools.